Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 7 Aug 2018 19:24:01 +0200
From:      Philipp Vlassakakis <freebsd-en@lists.vlassakakis.de>
To:        shamim.shahriar@gmail.com
Cc:        FreeBSD Mailing List <freebsd-questions@freebsd.org>
Subject:   Re: Jails - IPv4 and IPv6 
Message-ID:  <8ACAABE6-5054-4AFC-81F1-2909F9D69EF8@lists.vlassakakis.de>
In-Reply-To: <5B6895CB.1070004@gmail.com>
References:  <A7BCF1EF-7E21-4009-8C70-CA13F68B81FF@lists.vlassakakis.de> <5B6895CB.1070004@gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

> Am 06.08.2018 um 20:21 schrieb Shamim Shahriar =
<shamim.shahriar@gmail.com>:

> Hi Philipp
>=20
> I'm using both IPv4 and IPv6 in my vNet jails. The IPv4 gets =
configured via the jail.conf, while v6 is via rc.conf from inside the =
jail, two lines to define v6 on epair and the gw as well. If you need, u =
can send you the configurations later.
>=20
> They are quite stable, the pf on the hosts controls the access, works =
as expected.
>=20
> Regards
>=20


I would like to configure the IP addresses outside the jails, because =
customers may access these jails and I don't want customers to be able =
to simply change the IP addresses which might lead to the Jail being =
unreachable from the =E2=80=9Eoutside=E2=80=9C.=



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?8ACAABE6-5054-4AFC-81F1-2909F9D69EF8>