Date: Thu, 11 May 2000 13:09:28 -0400 From: "Cameron, Frank" <cameron@ctc.com> To: "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: ide cd not detected by 4.0 Message-ID: <E41DD2A84F21D411B567009027B0FD886C2A58@ctcjst-mail1.ctc.com>
next in thread | raw e-mail | index | archive | help
I upgraded my home PC from 3.4 to 4.0 not long ago and
am having an issue with my ide cd-rom drive.
My setup:
Primary
Master: 5G drive
Slave: 5G Drive
Secondary
Master: 24x CD-ROM
Slave: 2x CD-ROM
Tertiary:
on SoundBlaster, not used
Under DOS, 95, and 3.4 the drive was detected and worked
just fine; but under 4.0 the drive detection times out:
ata1-master: ata_command: timeout waiting for intr
ata1-master: identify failed
I booted once to my backup 3.4 kernel and the drive was
detected.
Does anyone have any suggestions on making this work?
Thanks.
-frank
Some excerpts from dmesg:
FreeBSD 4.0-STABLE #49: Sat May 6 21:55:06 EDT 2000
frank@tigger:/usr/src/sys/compile/FBSD_TIGGER
atapci0: <VIA 82C586 ATA33 controller> port
0xfff0-0xffff at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfff0
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=50
ata0: devices = 0x3
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfff8
ata1: mask=03 status0=50 status1=50
ata1: mask=03 status0=00 status1=00
ata1: devices = 0xc
ata1: at 0x170 irq 15 on atapci0
ata2: iobase=0x0168 altiobase=0x036e bmaddr=0x0000
ata2: mask=00 status0=ff status1=ff
ata2: probe allocation failed
unknown2: <Generic ESDI/IDE/ATA controller> at port
0x168-0x16f,0x36e-0x36f irq 10 on isa0
BIOS Geometries:
0:0271fe3f 0..625=626 cylinders, 0..254=255 heads,
1..63=63 sectors
1:026cfe3f 0..620=621 cylinders, 0..254=255 heads,
1..63=63 sectors
0 accounted for
Device configuration finished.
ata1-master: ata_command: timeout waiting for intr
ata1-master: identify failed
ata0-master: success setting up UDMA2 mode on VIA chip
ad0: <WDC AC35100L/08.09L08> ATA-4 disk at ata0 as
master
ad0: 4924MB (10085040 sectors), 10672 cyls, 15 heads, 63
S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
ata0-slave: success setting up WDMA2 mode on VIA chip
ad1: <Maxtor 85120A8/ZA8X0726> ATA-3 disk at ata0 as
slave
ad1: 4884MB (10002825 sectors), 10585 cyls, 15 heads, 63
S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, WDMA2
ad1: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad1
Creating DISK wd1
ata1-slave: piomode=0 dmamode=0 udmamode=-1 dmaflag=1
ata1-slave: success setting up PIO0 mode on generic chip
acd0: <CD-ROM CDU55E/1.0u> CDROM drive at ata1 as slave
acd0: read 344KB/s (344KB/s), 256KB buffer, PIO0
acd0: Reads: CD-DA stream
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM unknown medium, unlocked
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E41DD2A84F21D411B567009027B0FD886C2A58>