Date: Sat, 4 Feb 2006 11:14:47 -0500 (EST) From: Yasholomew Yashinski <yashy@mail.yashy.com> To: sparc64@freebsd.org Subject: vr(4) issue on Ultra 10 Message-ID: <20060204110201.W77754@mail.yashy.com>
next in thread | raw e-mail | index | archive | help
I'm intending to use a U10 as a firewall/gateway, so I'm trying to add one of my spare PCI NICs, to use along with the hme0. Trying dc(4) brought my OS down (writing another email), so I'm trying vr(4) which is flooding dmesg/syslog with errors. vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::250:baff:feb4:4664%vr0 prefixlen 64 scopeid 0x5 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 00:50:ba:b3:46:61 media: Ethernet autoselect (100baseTX <full-duplex>) status: active >From dmesg: FreeBSD 6.0-STABLE #0: Thu Jan 19 19:07:25 EST 2006 yashy@proksie.yashy.com:/usr/obj/usr/src/sys/COLONEL WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "tick" frequency 440000000 Hz quality 1000 real memory = 536870912 (512 MB) avail memory = 510935040 (487 MB) cpu0: Sun Microsystems UltraSparc-IIi Processor (440.00 MHz CPU) nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0: [FAST] pcib0: [GIANT-LOCKED] pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff pci0: <OFW PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0 pci1: <OFW PCI bus> on pcib1 ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1 auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x 140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0 ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0 uart0: <SAB 82532 v3.2, channel A> on puc0 uart0: CTS oflow uart1: <SAB 82532 v3.2, channel B> on puc0 uart1: CTS oflow uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0 uart2: keyboard (1200,n,8,1) kbd0 at sunkbd0 uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0 ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached) ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached) eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80a50f01 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x 1400722000-0x1400722003 irq 35,36 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: 08:00:20:a5:0f:01 hme0: [GIANT-LOCKED] machfb0: <ATI 3D Rage Pro> mem 0xe1000000-0xe1ffffff,0xe2000000-0xe2000fff at device 2.0 on pci1 machfb0: console machfb0: 16 MB aperture at 0xd5b4a000, 1 KB registers at 0xe17ffc00 machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz, DSP machfb0: resolution 1152x900 at 8 bpp atapci0: <CMD 646 WDMA2 controller> port 0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020 -0xc0002f at device 3.0 on pci1 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0 pci2: <OFW PCI bus> on pcib2 pci2: <network, ethernet> at device 2.0 (no driver attached) pci2: <mass storage, SCSI> at device 3.0 (no driver attached) pci2: <mass storage, SCSI> at device 3.1 (no driver attached) syscons0: <System console> on nexus0 syscons0: Unknown <16 virtual consoles, flags=0x300> Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. ad0: 9541MB <WDC WD100BA 16.13M16> at ata2-master WDMA2 acd0: CDRW <LTN323/DQ19> at ata3-master PIO4 acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> Trying to mount root from ufs:/dev/ad0a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x400-0x47f mem 0x2000-0x207f at device 2.0 on pci2 miibus1: <MII bus> on vr0 amphy0: <Am79C873 10/100 media interface> on miibus1 amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:50:ba:b3:46:61 vr0: [GIANT-LOCKED] vr0: link state changed to DOWN vr0: link state changed to UP vr0: watchdog timeout vr0: watchdog timeout vr0: watchdog timeout vr0: watchdog timeout vr0: rx packet lost vr0: rx packet lost vr0: rx packet lost vr0: rx packet lost vr0: rx packet lost <snip> Thanks in Advance, -- Yashy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060204110201.W77754>