Date: Sat, 8 Mar 2003 16:41:14 +0100 From: Christoph Kukulies <kuku@physik.rwth-aachen.de> To: freebsd-current@freebsd.org Subject: kermit hoses my system, too Message-ID: <200303081541.h28FfED17584@accms33.physik.rwth-aachen.de>
next in thread | raw e-mail | index | archive | help
I posted a note that mgetty was hosing my system because it clobbered /etc/ttys with data froim /etc/passwd and Terry meant it could have to do with some old FreeBSD VM bug. Today I tried to connect to the modem via kermit and the system got frozen bad. dmesg: w.bus.devctl_disable: WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted pid 494 (squid), uid 0: exited on signal 6 (core dumped) no matching session no matching session no matching session pid 576 (squid), uid 0: exited on signal 6 (core dumped) Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... 7 7 1 1 done Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #5: Sat Mar 1 23:32:22 GMT 2003 kuku@www.kukulies.org:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c3000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c30a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1800135028 Hz CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1800.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536854528 (511 MB) avail memory = 514134016 (490 MB) Allocating major#253 to "net" Allocating major#252 to "pci" Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P4S8X > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00f1720 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, FireWire> at device 2.3 (no driver attached) atapci0: <SiS 963 UDMA133 controller> port 0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 11 at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 3 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe5800000-0xe5800fff irq 5 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xe5000000-0xe5000fff irq 9 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff mem 0xe4000000-0xe4000fff irq 4 at device 4.0 on pci0 sis0: Ethernet address: 00:e0:18:d3:f4:e0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0x9400-0x941f irq 10 at device 9.0 on pci0 ed0: address 00:e0:7d:7e:2c:3a, type NE2000 (16 bit) pci0: <simple comms> at device 10.0 (no driver attached) cbb0: <RF5C475 PCI-CardBus Bridge> irq 4 at device 11.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 atapci1: <Promise SATA UDMA133 controller> port 0x8000-0x807f,0x8400-0x840f,0x8800-0x883f mem 0xe2800000-0xe281ffff,0xe3000000-0xe3000fff irq 11 at device 14.0 on pci0 atapci1: Busmastering DMA not configured ata2: at 0x8800 on atapci1 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <Option ROM> at iomem 0xd0000-0xdffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 4 function 0 config 1 on pccard0 wi0: 802.11 address: 00:02:2d:49:80:aa wi0: using Lucent Technologies, WaveLAN/IEEE wi0: Lucent Firmware: Station (7.28.1) wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ata1-master: timeout waiting for interrupt ata1-master: ATAPI identify failed ad0: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata0-master UDMA100 Mounting root from ufs:/dev/ad0s1a no matching session (btw., no matching session, is that ppp(oe) originated?) Now watch the sio output. I have disabled on board sios because I have a PCI modem card. But this doesn't seem to be recognized. -- Chris Christoph P. U. Kukulies kukulies@rwth-aachen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303081541.h28FfED17584>