Date: Wed, 20 Sep 2006 09:05:05 -0500 From: Derek Ragona <derek@computinginnovations.com> To: Laurence Sanford <lauasanf@wilderness.homeip.net>, questions@freebsd.org Subject: Re: Crash; shutdown Message-ID: <6.0.0.22.2.20060920090334.0221b9e0@mail.computinginnovations.com> In-Reply-To: <45107E46.4040207@wilderness.homeip.net> References: <45107E46.4040207@wilderness.homeip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I have one system that also has an Nvidia video, after I update ports will
crash if I don't rebuild the nvidia driver and X screensaver The
screensaver makes it crash otherwise.
-Derek
At 06:33 PM 9/19/2006, Laurence Sanford wrote:
>So I got up and walked away from my computer this afternoon, and came back
>to find it in the middle of shutting down. No good reason, no crash dump
>(yes, they're configured) no nothing, just this:
>
>Sep 19 18:14:53 colossus syslogd: exiting on signal 15
>
>At this point, everything sync'd up and the system shut down, completely,
>and powered off.
>
>I've had it suggested that this could be a power supply going south. Any
>other ideas?
>
>
>
>
>
>
>uname:
>root@colossus(/var/log)# uname -a
>FreeBSD colossus.cotharyus.net 6.1-STABLE FreeBSD 6.1-STABLE #6: Sat
>Sep 2 04:56:20 CDT 2006
>lauasanf@colossus.cotharyus.net:/usr/obj/usr/src/sys/Colossus i386
>
>
>dmesg:
>root@colossus(/var/log)# dmesg
>Copyright (c) 1992-2006 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 6.1-STABLE #6: Sat Sep 2 04:56:20 CDT 2006
> lauasanf@colossus.cotharyus.net:/usr/obj/usr/src/sys/Colossus
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2010.31-MHz 686-class
>CPU)
> Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1
>Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x1<SSE3>
> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
> AMD Features2=0x3<LAHF,CMP>
> Cores per package: 2
>real memory = 1073676288 (1023 MB)
>avail memory = 1037369344 (989 MB)
>ACPI APIC Table: <Nvidia AWRDACPI>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
>ioapic0: Changing APIC ID to 2
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>acpi0: <Nvidia AWRDACPI> on motherboard
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi0: Power Button (fixed)
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <memory> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 1.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
>ohci0: <OHCI (generic) USB controller> mem 0xdb102000-0xdb102fff irq 21 at
>device 2.0 on pci0
>ohci0: [GIANT-LOCKED]
>usb0: OHCI version 1.0, legacy support
>usb0: SMM does not respond, resetting
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 10 ports with 10 removable, self powered
>ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq
>22 at device 2.1 on pci0
>ehci0: [GIANT-LOCKED]
>usb1: EHCI version 1.0
>usb1: companion controller, 4 ports each: usb0
>usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
>usb1: USB revision 2.0
>uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub1: 10 ports with 10 removable, self powered
>pcm0: <nVidia nForce4> port 0xd400-0xd4ff,0xd800-0xd8ff mem
>0xdb101000-0xdb101fff irq 23 at device 4.0 on pci0
>pcm0: <Avance Logic ALC850 AC97 Codec>
>atapci0: <nVidia nForce CK804 UDMA133 controller> port
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>pci5: <ACPI PCI bus> on pcib1
>fwohci0: <Texas Instruments TSB43AB22/A> mem
>0xdb004000-0xdb0047ff,0xdb000000-0xdb003fff irq 16 at device 11.0 on pci5
>fwohci0: OHCI version 1.10 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:11:d8:00:00:86:18:47
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xd000-0xd007 mem
>0xdb100000-0xdb100fff irq 21 at device 10.0 on pci0
>nve0: Ethernet address 00:15:f2:7f:80:86
>miibus0: <MII bus> on nve0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>1000baseT-FDX, auto
>nve0: Ethernet address: 00:15:f2:7f:80:86
>pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>pci4: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
>pci2: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
>pci1: <ACPI PCI bus> on pcib5
>nvidia0: <GeForce 6800> mem
>0xd8000000-0xd8ffffff,0xd0000000-0xd7ffffff,0xd9000000-0xd9ffffff irq 18
>at device 0.0 on pci1
>nvidia0: [GIANT-LOCKED]
>acpi_tz0: <Thermal Zone> on acpi0
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>fdc0: [FAST]
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A
>ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
>on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/16 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>ppbus0: IEEE1284 device found /NIBBLE/ECP
>Probing for PnP devices on ppbus0:
>ppbus0: <HEWLETT-PACKARD DESKJET 810C> MLC,PCL,PML
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>ukbd0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr
>2, iclass 3/1
>kbd1 at ukbd0
>uhid0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr
>2, iclass 3/1
>umass0: Generic USB Storage Device, rev 1.10/1.00, addr 3
>ums0: Microsoft Microsoft Trackball Optical\M-., rev 1.10/1.21, addr 4,
>iclass 3/1
>ums0: 5 buttons and Z dir.
>uhub2: vendor 0x05e3 USB Hub, class 9/0, rev 1.01/0.12, addr 5
>uhub2: 4 ports with 4 removable, bus powered
>Timecounters tick every 1.000 msec
>ad0: 43979MB <IBM DTLA-307045 TX6OA6AA> at ata0-master UDMA100
>ad1: 190782MB <Seagate ST3200822A 3.01> at ata0-slave UDMA100
>ad2: 38166MB <WDC WD400BB-22CAA0 16.06V16> at ata1-master UDMA100
>acd0: DVDR <LITE-ON DVDRW SOHW-832S/VS01> at ata1-slave UDMA33
>SMP: AP CPU #1 Launched!
>cd0 at ata1 bus 0 target 1 lun 0
>cd0: <LITE-ON DVDRW SOHW-832S VS01> Removable CD-ROM SCSI-0 device
>cd0: 33.000MB/s transfers
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>da0 at umass-sim0 bus 0 target 0 lun 0
>da0: <Lexar USB Storage-SMC 0180> Removable Direct Access SCSI-0 device
>da0: 1.000MB/s transfers
>da0: Attempt to query device size failed: NOT READY, Medium not present
>da1 at umass-sim0 bus 0 target 0 lun 1
>da1: <Lexar USB Storage-CFC 0180> Removable Direct Access SCSI-0 device
>da1: 1.000MB/s transfers
>da1: Attempt to query device size failed: NOT READY, Medium not present
>da2 at umass-sim0 bus 0 target 0 lun 2
>da2: <Lexar USB Storage-MMC 0180> Removable Direct Access SCSI-0 device
>da2: 1.000MB/s transfers
>da2: 489MB (1002497 512 byte sectors: 64H 32S/T 489C)
>da3 at umass-sim0 bus 0 target 0 lun 3
>da3: <Lexar USB Storage-MSC 0180> Removable Direct Access SCSI-0 device
>da3: 1.000MB/s transfers
>da3: Attempt to query device size failed: NOT READY, Medium not present
>(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
>(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
>(da0:umass-sim0:0:0:0): Medium not present
>(da0:umass-sim0:0:0:0): Unretryable error
>Opened disk da0 -> 6
>(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
>(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
>(da0:umass-sim0:0:0:0): Medium not present
>(da0:umass-sim0:0:0:0): Unretryable error
>Opened disk da0 -> 6
>(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
>(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
>(da0:umass-sim0:0:0:0): Medium not present
>(da0:umass-sim0:0:0:0): Unretryable error
>Opened disk da0 -> 6
>(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
>(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
>(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
>(da1:umass-sim0:0:0:1): Medium not present
>(da1:umass-sim0:0:0:1): Unretryable error
>Opened disk da1 -> 6
>(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
>(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
>(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
>(da1:umass-sim0:0:0:1): Medium not present
>(da1:umass-sim0:0:0:1): Unretryable error
>Opened disk da1 -> 6
>(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
>(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
>(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
>(da1:umass-sim0:0:0:1): Medium not present
>(da1:umass-sim0:0:0:1): Unretryable error
>Opened disk da1 -> 6
>(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
>(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
>(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
>(da3:umass-sim0:0:0:3): Medium not present
>(da3:umass-sim0:0:0:3): Unretryable error
>Opened disk da3 -> 6
>(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
>(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
>(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
>(da3:umass-sim0:0:0:3): Medium not present
>(da3:umass-sim0:0:0:3): Unretryable error
>Opened disk da3 -> 6
>(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
>(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
>(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
>(da3:umass-sim0:0:0:3): Medium not present
>(da3:umass-sim0:0:0:3): Unretryable error
>Opened disk da3 -> 6
>_______________________________________________
>freebsd-questions@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>
>--
>This message has been scanned for viruses and
>dangerous content by MailScanner, and is
>believed to be clean.
>MailScanner thanks transtec Computers for their support.
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20060920090334.0221b9e0>