Date: Wed, 23 Jul 2003 17:53:52 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: Olaf Hoyer <ohoyer@gaff.hhhr.ision.net> Cc: freebsd-alpha@freebsd.org Subject: Re: Adaptec 62022 sf(4) on a Miata 433a Message-ID: <20030723155351.GF513@cicely12.cicely.de> In-Reply-To: <20030723173631.L46117-100000@gaff.hhhr.ision.net> References: <20030723173631.L46117-100000@gaff.hhhr.ision.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 23, 2003 at 05:42:49PM +0200, Olaf Hoyer wrote: > Hi! > > Well, just a short question: > > I plan to use an Adaptec 62022 NIC with my Miata 433a, since they can be > obtained cheaply now. > > The box will be used as a workstation, currently under FreeBSD 4.7, and > I want to know > > - if anyone hat this card already in use in a Miata My expiriences with ahc cards on alpha were ugly. I don't know what to expect from non ahc based adaptec cards. > - if there are known problems regarding 64bit PCI No. > I already had some talk with Maxime Henrion, a sf-based-card will arrive > shortly, so there is hope that also busdma will be supported soon. > Will therefor arise some potential of trouble? Yes and no. A non busdma driver must be aware of alpha to work. Otherwise a busdma driver is required only for large memory situations, which we curently don't support yet. > The box has currently 512MB of RAM, but will be stocked up to 1GB soon, > which according to docs is the limit with FreeBSD due to dma limitation. My impression was that Miatas are also limited to 1G by hardware? Does anyone know if Miatas can be fit with >1G? -- B.Walter BWCT http://www.bwct.de ticso@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030723155351.GF513>