Date: Sun, 05 Aug 2001 05:55:33 +0900 (JST) From: Hajimu UMEMOTO <ume@mahoroba.org> To: imp@harmony.village.org Cc: stable@FreeBSD.ORG, mobile@FreeBSD.ORG Subject: Re: 4.4-PRERELEASE never resume from suspend Message-ID: <20010805.055533.59723180.ume@mahoroba.org> In-Reply-To: <200108041929.f74JTlH75815@harmony.village.org> References: <20010805.024856.94992825.ume@mahoroba.org> <200108041929.f74JTlH75815@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----Next_Part(Sun_Aug__5_05:55:33_2001_090)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit >>>>> On Sat, 04 Aug 2001 13:29:47 -0600 >>>>> Warner Losh <imp@harmony.village.org> said: imp> I've not seen this problem. Can you do me the favor of trying to boot imp> a kernel without the pccard stuff in it at all and let me know if you imp> get similar behavior? That would eliminate at least one variable imp> that's changed much since July 21. Thank you very much and I look imp> forward to the results. I hope it makes no difference, but fear that imp> it might. I just did it. When booting kernel without any pccard stuff, it works fine, suspend/resume is okay. The output of dmesg is attached. ----Next_Part(Sun_Aug__5_05:55:33_2001_090)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Description: dmesg.out Content-Disposition: inline; filename="dmesg.out" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-PRERELEASE #0: Fri Aug 3 14:08:10 JST 2001 ume@piano.mahoroba.org:/usr/obj/usr/src/sys/PIANO Calibrating clock(s) ... TSC clock: 229602222 Hz, i8254 clock: 1193233 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P55C (quarter-micron) (229.59-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 100655104 (98296K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00446000 - 0x05ff5fff, 96141312 bytes (23472 pages) avail memory = 93716480 (91520K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd820 bios32: Entry = 0xfd831 (c00fd831) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xd86c pnpbios: Found PnP BIOS data at 0xc00fdfd0 pnpbios: Entry = f0000:ba2e Rev = 1.0 Other BIOS signatures found: ACPI: 000fe1d0 Preloaded elf kernel "kernel" at 0xc0420000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=c7011045) apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 123243776 bytes/sec bzero() bandwidth = 164527805 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=c7011045) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1045, dev=0xc701, revid=0x32 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1045, dev=0xc700, revid=0x31 class=06-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x102c, dev=0x00e5, revid=0xc6 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 20000000, size 24 found-> vendor=0x1045, dev=0xc861, revid=0x10 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 found-> vendor=0x1045, dev=0xd568, revid=0x30 class=01-01-82, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001000, size 4 pci0: <PCI bus> on pcib0 isab0: <PCI to ISA bridge (vendor=1045 device=c700)> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <Chips & Technologies 65555 SVGA controller> (vendor=0x102c, dev=0x00e5) at 3.0 ohci0: <OPTi 82C861 (FireLink) USB controller> irq 10 at device 5.0 on pci0 ohci0: Could not map memory device_probe_and_attach: ohci0 attach returned 6 atapci0: <Generic PCI ATA controller> port 0x1000-0x100f at device 20.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1008 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 23 devices, largest 282 bytes PNP0000: adding irq mask 00x4 PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: end config pnpbios: handle 1 device ID PNP0000 (0000d041) PNP0100: adding irq mask 00x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: end config pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: end config pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 4 device ID PNP0800 (0008d041) PNP0320: adding irq mask 00x2 PNP0320: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0320: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0320: end config pnpbios: handle 5 device ID PNP0320 (2003d041) PNP0f13: adding irq mask 0x1000 PNP0f13: end config pnpbios: handle 6 device ID PNP0f13 (130fd041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: end config pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: end config pnpbios: handle 8 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x22-0x25, size=0x4, align=0x1 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0xb0-0xb0, size=0x1, align=0x1 PNP0c02: adding io range 0x1d0-0x1ef, size=0x20, align=0x1 PNP0c02: adding io range 0x1010-0x1037, size=0x28, align=0x1 PNP0c02: end config pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0201: adding dma mask 0x10 PNP0201: adding io range 0-0xf, size=0x10, align=0x1 PNP0201: adding io range 0x80-0x8f, size=0x10, align=0x1 PNP0201: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0201: adding io range 0x400-0x40f, size=0x10, align=0x1 PNP0201: adding io range 0x4c0-0x4df, size=0x20, align=0x1 PNP0201: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0201: adding io range 0x4e0-0x4ef, size=0x10, align=0x1 PNP0201: end config pnpbios: handle 10 device ID PNP0201 (0102d041) PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x8 PNP0401: adding io range 0x3bc-0x3bf, size=0x4, align=0x1 PNP0401: adding io range 0x7bc-0x7bf, size=0x4, align=0x1 PNP0401: end config pnpbios: handle 11 device ID PNP0401 (0104d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: end config pnpbios: handle 12 device ID PNP0501 (0105d041) RIO0000: adding irq mask 0000 RIO0000: adding dma mask 00 RIO0000: adding io range 0-0xffffffff, size=0, align=0x1 RIO0000: end config pnpbios: handle 13 device ID RIO0000 (00002f49) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: end config pnpbios: handle 14 device ID PNP0700 (0007d041) ESS1879: adding irq mask 0x20 ESS1879: adding dma mask 0x2 ESS1879: adding dma mask 0x20 ESS1879: adding io range 0x220-0x22f, size=0x10, align=0x1 ESS1879: adding io range 0x388-0x38b, size=0x4, align=0x1 ESS1879: adding io range 0x330-0x331, size=0x2, align=0x1 ESS1879: end config pnpbios: handle 15 device ID ESS1879 (79187316) ESS0009: adding io range 0x800-0x807, size=0x8, align=0x1 ESS0009: end config pnpbios: handle 16 device ID ESS0009 (09007316) PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 PNP0e00: end config pnpbios: handle 17 device ID PNP0e00 (000ed041) PNP0e00: adding io range 0x3e4-0x3e5, size=0x2, align=0x1 PNP0e00: end config pnpbios: handle 18 device ID PNP0e00 (000ed041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x5ffffff, size=0x5f00000 PNP0c01: end config pnpbios: handle 19 device ID PNP0c01 (010cd041) PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: end config pnpbios: handle 20 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0-0xffffffff, size=0, align=0 PNP0c02: end config pnpbios: handle 21 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000 PNP0c02: end config pnpbios: handle 22 device ID PNP0c02 (020cd041) PNP0c02: adding irq mask 0000 PNP0c02: adding io range 0-0xffffffff, size=0, align=0 PNP0c02: adding io range 0-0xffffffff, size=0, align=0 PNP0c02: end config pnpbios: handle 23 device ID PNP0c02 (020cd041) isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 ppc0: parallel port found at 0x3bc ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0 isa_probe_children: probing PnP devices unknown: <PNP0000> can't assign resources unknown: <PNP0000> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0 unknown: <PNP0100> failed to probe at port 0x40-0x43 irq 0 on isa0 unknown: <PNP0b00> failed to probe at port 0x70-0x71 irq 8 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0320> can't assign resources unknown: <PNP0320> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0c04> failed to probe at port 0xf0-0xff irq 13 on isa0 unknown: <PNP0a03> failed to probe at port 0xcf8-0xcff on isa0 unknown: <PNP0c02> failed to probe at port 0x22-0x25,0x2e-0x2f,0x92,0xb0,0x1d0-0x1ef,0x1010-0x1037 on isa0 unknown: <PNP0201> failed to probe at port 0-0xf,0x80-0x8f,0xc0-0xdf,0x400-0x40f,0x4c0-0x4df,0x480-0x48f,0x4e0-0x4ef drq 4 on isa0 ppc1: using normal I/O port range unknown: <ECP parallel printer port> failed to probe at port 0x3bc-0x3bf,0x7bc-0x7bf irq 7 drq 3 on isa0 unknown: <PNP0501> can't assign resources unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <RIO0000> can't assign resources unknown: <RIO0000> at port 0x10 on isa0 unknown: <PNP0700> can't assign resources unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 sbc0: <ESS ES1879> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,5 on isa0 pcm0: <ESS 18xx DSP> on sbc0 pcm0: ESS1879 detected, newspeed pcm: setmap 4000, 1000; 0xc6cd7000 -> 4000 pcm: setmap 5000, 1000; 0xc6cd8000 -> 5000 unknown: <ESS0009> failed to probe at port 0x800-0x807 on isa0 pcic0: <Intel i82365SL-A/B> at port 0x3e0-0x3e1 on isa0 pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 pcic1: <Intel i82365SL-A/B> at port 0x3e4-0x3e5 on isa0 pcic1: Polling mode pccard2: <PC Card bus (classic)> on pcic1 unknown: <PNP0c01> failed to probe at iomem 0-0x9ffff,0x100000-0x5ffffff on isa0 unknown: <PNP0c01> failed to probe at iomem 0xf0000-0xfffff,0xfffe0000-0xffffffff on isa0 unknown: <PNP0c02> failed to probe at port 0x10 on isa0 unknown: <PNP0c02> failed to probe at iomem 0xcb000-0xcbfff on isa0 unknown: <PNP0c02> can't assign resources unknown: <PNP0c02> at port 0x11,0x12 on isa0 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: stf0 attached bpf: vlan0 attached bpf: lo0 attached IPsec: Initialized Security Association Processing. Creating DISK ad0 ad0: <TOSHIBA MK2016GAP/U0.30 A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, BIOSDMA ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 19077MB <TOSHIBA MK2016GAP> [38760/16/63] at ata0-master BIOSDMA Mounting root from ufs:/dev/ad0s2a ad0s1: type 0x6, start 63, end = 530144, size 530082 : OK ad0s2: type 0xa5, start 530145, end = 21494969, size 20964825 : OK ad0s3: type 0xa5, start 21494970, end = 39070079, size 17575110 : OK start_init: trying /sbin/init IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled WARNING: pseudo-random number generator used for IPsec processing IPv6 packet filtering initialized, logging disabled Linux-ELF exec handler installed ----Next_Part(Sun_Aug__5_05:55:33_2001_090)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Description: My Signature Content-Disposition: inline; filename=".signature-world" Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan ume@mahoroba.org ume@bisd.hitachi.co.jp ume@{,jp.}FreeBSD.org http://www.imasy.org/~ume/ ----Next_Part(Sun_Aug__5_05:55:33_2001_090)---- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010805.055533.59723180.ume>