Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 03 Jan 2011 16:31:50 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        Troy Beisigl <troy@i2bnetworks.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: 9650SE-2LP raid card locks system
Message-ID:  <4D224046.4050307@sentex.net>
In-Reply-To: <F65093FD-6F09-4493-AB0C-673671C93C5C@i2bnetworks.com>
References:  <F65093FD-6F09-4493-AB0C-673671C93C5C@i2bnetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help

I have a number of these cards and they work very well for us.  What
version of the firmware are you using on the card ?

I have this on a busy db server. But its RELENG8.

twa0: <3ware 9000 series Storage Controller> port 0x1000-0x10ff mem
0xb0000000-0xb1ffffff,0xb4000000-0xb4000fff irq 19 at device 0.0 on pci12
twa0: [ITHREAD]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2
ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004

I have had good luck with Areca cards as well, but they start in 4 port
models.  But really, all should work just fine with this 3ware/LSI card

	---Mike




On 1/3/2011 3:58 PM, Troy Beisigl wrote:
> Hi All,
> 
> We have been seeing a problem with FreeBSD 7.3 and up where the system
> will just hang when using a 9650SE-2LP raid card and 2 500G drives
> mirrored. The system will run for about a week and then the filesystem
> just hangs, causing the system to hang. We've looked through the logs
> and found nothing at all. We have changed the card and then the
> motherboard but the problem still exists. We have run this card with
> CentOS without fail in the same system configuration.
> 
> If the card is not supported, can anyone recommend one that does work?
> 
> Thanks,
> 
> Troy Beisigl
> 
> 
> 
> 
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
> 
> 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D224046.4050307>