Date: Sat, 21 Jul 2001 09:59:07 +0200 (CEST) From: Alexander Leidinger <Alexander@Leidinger.net> To: cokane@freebsd.org Cc: cg@freebsd.org, multimedia@freebsd.org Subject: Re: VIA VT82C686A onboard sound didn't work (-current) Message-ID: <200107210759.f6L7x8201436@Magelan.Leidinger.net> In-Reply-To: <20010721071941.E72108@evil.apt>
next in thread | previous in thread | raw e-mail | index | archive | help
--0-1804289383-995702350=:1433
Content-Type: TEXT/plain; charset=us-ascii
On 21 Jul, Coleman Kane wrote:
> Try making sure the device is enabled in the BIOS. My Epox 8K7A+ was
It is enabled.
There are two switches for it. The switch for "integrated audio" (I
think it is called like this) in in the integrated periphals section is
at "auto", the other possibility for it is "disabled".
At the section where I also can set some soundblaster values I disabled
the soundblaster switch (at the moment) and enabled the "I dont know how
it is called, but it talks about the onboard sound" switch.
> shipped with this turned off. Some systems do not entirely shut off the
> device sometimes. So it gets probed, but the outputs are not powered.
> BTW I have installed 4.2/4.3-RELEASE, 4-STABLE, and 5-CURRENT and they
> all played on mine.
Fine. Now I only have to convince my system to do the same...
My actual dmesg output is attached (now at -current from yesterday).
Is there something else I can do?
Bye,
Alexander.
--
Give a man a fish and you feed him for a day;
teach him to use the Net and he won't bother you for weeks.
http://www.Leidinger.net Alexander @ Leidinger.net
GPG fingerprint = C518 BC70 E67F 143F BE91 3365 79E2 9C60 B006 3FE7
--0-1804289383-995702350=:1433
Content-Type: TEXT/plain; name="dmesg.out"
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Fri Jul 20 23:38:35 CEST 2001
root@Magelan.Leidinger.net:/big/usr/src/sys/i386/compile/WORK
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 801834166 Hz
CPU: AMD Duron(tm) Processor (801.83-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x631 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 256757760 (250740K bytes)
Preloaded elf kernel "kernel" at 0xc043f000.
Preloaded elf module "cd9660.ko" at 0xc043f09c.
Preloaded elf module "linux.ko" at 0xc043f13c.
Preloaded elf module "snd_via82c686.ko" at 0xc043f1dc.
Preloaded elf module "snd_pcm.ko" at 0xc043f284.
Preloaded elf module "usb.ko" at 0xc043f324.
Preloaded elf module "agp.ko" at 0xc043f3c0.
Preloaded elf module "accf_data.ko" at 0xc043f45c.
Preloaded elf module "accf_http.ko" at 0xc043f500.
Preloaded elf module "atspeaker.ko" at 0xc043f5a4.
Preloaded elf module "joy.ko" at 0xc043f648.
Pentium Pro MTRR support enabled
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc033f2d7 (1000117)
VESA: 3dfx Interactive, Inc.
Using $PIR table, 9 entries at 0xc00fdd00
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <BIOSTA AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Control Method Power Button Device> on acpi0
acpi_button1: <Control Method Sleep Button Device> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 at device 7.5 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A
sio1: configured irq 10 not in bitmap of probed irqs 0
pca0 at port 0x40 on isa0
isic0 at port 0x1b00-0x1b1f,0x16e0-0x16ff,0x6e0-0x6ff,0xee0-0xeff,0x1300-0x131f,0x300-0x31f,0xb00-0xb1f irq 3 flags 0x4 on isa0
isic0: passive stack unit 0
isic0: AVM A1 or Fritz!Card Classic
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
unknown: <PNP0200> can't assign resources
pca1: <AT-style speaker sound> at port 0x61 on isa0
WARNING: Driver mistake: repeat make_dev("pcaudio")
WARNING: Driver mistake: repeat make_dev("pcaudioctl")
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0510> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0F13> can't assign resources
unknown: <PNP0303> can't assign resources
i4brbch: 2 raw B channel access device(s) attached
i4bisppp: 2 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4btrc: 2 ISDN trace device(s) attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
i4bctl: ISDN system control port attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata0-master UDMA66
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata1-master PIO0
Mounting root from ufs:/dev/ad0s2a
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcm0: play interrupt timeout, channel dead
pcfclock0: no PCF found
pcfclock0: no PCF found
i4b-L2 i4b_T202_timeout: unit 0, N202 = 3
i4b: unit 0, assigned TEI = 75 = 0x4b
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
pcfclock0: no PCF found
--0-1804289383-995702350=:1433--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200107210759.f6L7x8201436>