Date: Wed, 26 Nov 2003 14:44:51 +1030 From: "Daniel O'Connor" <doconnor@gsoft.com.au> To: freebsd-stable@freebsd.org Subject: Compact Flash PCMCIA problems Message-ID: <200311261444.51549.doconnor@gsoft.com.au>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_7iCx/8TZ0ZFeWiQ
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hi,
I recently purchased a 256Mb Kodak CF card (upgrade from my 20Mb one :)
but I can't use it in the adapter (CF -> PCMCIA) in FreeBSD. It works
in XP on another laptop, I haven't tried rebooting to test it on this
one yet.
A guy at work has a Hitachi 256Mb card which works fine in FreeBSD.
Here is what appears in /var/log/messages for the Kodak 256Mb device ->
Nov 26 12:11:00 chowder /kernel: pccard: card inserted, slot 1
Nov 26 12:11:05 chowder pccardd[80]: Card "KODAK Picture Card"("KODAK") [] [] matched "KODAK Picture Card" ("KODAK") [(null)] [(null)]
Nov 26 12:11:10 chowder pccardd[80]: driver allocation failed for KODAK Picture Card(KODAK): Device not configured
Nov 26 14:43:30 chowder /kernel: pccard: card removed, slot 1
Nov 26 14:43:30 chowder pccardd[80]: ata4: KODAK Picture Card (KODAK) removed.
For the 20Mb "Kodak" ->
Nov 26 12:25:13 chowder /kernel: pccard: card inserted, slot 1
Nov 26 12:25:18 chowder pccardd[80]: Card "SunDisk"("SDP") [5/3 0.6] [[none]] matched "SunDisk" ("/.*/") [(null)] [(null)]
Nov 26 12:25:24 chowder /kernel: ata4 at port 0x240-0x247,0x24e irq 10 slot 1 on pccard1
Nov 26 12:25:24 chowder /kernel: ad1: 19MB <SunDisk SDCFB-20> [612/2/32] at ata4-master BIOSPIO
Nov 26 12:25:24 chowder pccardd[80]: ata4: SunDisk (/.*/) inserted.
For the 256Mb Hitachi ->
Nov 26 13:37:50 chowder /kernel: pccard: card inserted, slot 1
Nov 26 13:37:55 chowder pccardd[80]: Card "HITACHI"("FLASH") [5.0] [[none]] matched "HITACHI" ("/.*FLASH.*/") [(null)] [(null)]
Nov 26 13:38:01 chowder /kernel: ata4 at port 0x240-0x247,0x24e irq 10 slot 1 on pccard1
Nov 26 13:38:01 chowder /kernel: ad1: 244MB <Hitachi XXM2.3.0> [695/15/48] at ata4-master BIOSPIO
Nov 26 13:38:01 chowder pccardd[80]: ata4: HITACHI (/.*FLASH.*/) inserted.
I've attached the output of 'pccard dumpcis' for each card, and my
pccard.conf file.
--
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
-- Andrew Tanenbaum
GPG Fingerprint - 9A8C 569F 685A D928 5140 AE4B 319B 41F4 5D17 FDD5
--Boundary-00=_7iCx/8TZ0ZFeWiQ
Content-Type: text/plain;
charset="us-ascii";
name="Kodak-20Mb-cis.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="Kodak-20Mb-cis.txt"
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 4
000: df 72 01 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 7.0 x 100 ns, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 03 d9 01 ff
(MWAIT) (3V card)
Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
000: df 01
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 45 00 01 04
PCMCIA ID = 0x45, OEM ID = 0x401
Tuple #5, code = 0x15 (Version 1 info), length = 23
000: 04 01 53 75 6e 44 69 73 6b 00 53 44 50 00 35 2f
010: 33 20 30 2e 36 00 ff
Version = 4.1, Manuf = [SunDisk], card vers = [SDP]
Addit. info = [5/3 0.6]
Tuple #6, code = 0x80 (Unknown), length = 3
000: 14 08 00
Tuple #7, code = 0x21 (Functional ID), length = 2
000: 04 01
Fixed disk card - POST initialize
Tuple #8, code = 0x22 (Functional EXT), length = 2
000: 01 01
Disk interface: IDE
Tuple #9, code = 0x22 (Functional EXT), length = 3
000: 02 0c 0f
Disk features: Silicon, Unique, Single
Sleep, Standby, Idle, Low power,
Tuple #10, code = 0x1a (Configuration map), length = 5
000: 01 07 00 02 0f
Reg len = 2, config register addr = 0x200, last config = 0x7
Registers: XXXX----
Tuple #11, code = 0x1b (Configuration entry), length = 11
000: c0 c0 a1 27 55 4d 5d 75 08 00 21
Config index = 0x0(default)
Interface byte = 0xc0 (memory) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Memory space length = 0x8
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #12, code = 0x1b (Configuration entry), length = 6
000: 00 01 21 b5 1e 4d
Config index = 0x0
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #13, code = 0x1b (Configuration entry), length = 13
000: c1 41 99 27 55 4d 5d 75 64 f0 ff ff 21
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse, Shared
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #14, code = 0x1b (Configuration entry), length = 6
000: 01 01 21 b5 1e 4d
Config index = 0x1
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #15, code = 0x1b (Configuration entry), length = 18
000: c2 41 99 27 55 4d 5d 75 ea 61 f0 01 07 f6 03 01
010: ee 21
Config index = 0x2(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x1f0 block length = 0x8
I/O address # 2: block start = 0x3f6 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #16, code = 0x1b (Configuration entry), length = 6
000: 02 01 21 b5 1e 4d
Config index = 0x2
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #17, code = 0x1b (Configuration entry), length = 18
000: c3 41 99 27 55 4d 5d 75 ea 61 70 01 07 76 03 01
010: ee 21
Config index = 0x3(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x170 block length = 0x8
I/O address # 2: block start = 0x376 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #18, code = 0x1b (Configuration entry), length = 6
000: 03 01 21 b5 1e 4d
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #19, code = 0x1b (Configuration entry), length = 4
000: 07 00 28 d3
Config index = 0x7
Tuple #20, code = 0x14 (No link), length = 0
Tuple #21, code = 0xff (Terminator), length = 0
2 slots found
--Boundary-00=_7iCx/8TZ0ZFeWiQ
Content-Type: text/plain;
charset="us-ascii";
name="Kodak-256Mb-cis.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="Kodak-256Mb-cis.txt"
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: d9 01 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 250nS, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 03 d9 01 ff
(MWAIT) (3V card)
Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
000: df 01
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 98 00 00 00
PCMCIA ID = 0x98, OEM ID = 0x0
Tuple #5, code = 0x15 (Version 1 info), length = 32
000: 04 01 4b 4f 44 41 4b 20 50 69 63 74 75 72 65 20
010: 43 61 72 64 00 4b 4f 44 41 4b 00 00 00 00 00 ff
Version = 4.1, Manuf = [KODAK Picture Card], card vers = [KODAK]
Addit. info = [],[]
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 04 01
Fixed disk card - POST initialize
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 01
Disk interface: IDE
Tuple #8, code = 0x22 (Functional EXT), length = 3
000: 02 0c 0f
Disk features: Silicon, Unique, Single
Sleep, Standby, Idle, Low power,
Tuple #9, code = 0x1a (Configuration map), length = 5
000: 01 03 00 02 0f
Reg len = 2, config register addr = 0x200, last config = 0x3
Registers: XXXX----
Tuple #10, code = 0x1b (Configuration entry), length = 8
000: c0 c0 a1 01 55 08 00 20
Config index = 0x0(default)
Interface byte = 0xc0 (memory) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Memory space length = 0x8
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #11, code = 0x1b (Configuration entry), length = 6
000: 00 01 21 b5 1e 4d
Config index = 0x0
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #12, code = 0x1b (Configuration entry), length = 10
000: c1 41 99 01 55 64 f0 ff ff 20
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse, Shared
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 6
000: 01 01 21 b5 1e 4d
Config index = 0x1
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #14, code = 0x1b (Configuration entry), length = 15
000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20
Config index = 0x2(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x1f0 block length = 0x8
I/O address # 2: block start = 0x3f6 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #15, code = 0x1b (Configuration entry), length = 6
000: 02 01 21 b5 1e 4d
Config index = 0x2
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #16, code = 0x1b (Configuration entry), length = 15
000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20
Config index = 0x3(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x170 block length = 0x8
I/O address # 2: block start = 0x376 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #17, code = 0x1b (Configuration entry), length = 6
000: 03 01 21 b5 1e 4d
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #18, code = 0x14 (No link), length = 0
Tuple #19, code = 0xff (Terminator), length = 0
2 slots found
--Boundary-00=_7iCx/8TZ0ZFeWiQ
Content-Type: text/plain;
charset="us-ascii";
name="Hitachi-256Mb-cis.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="Hitachi-256Mb-cis.txt"
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 4
000: df 4a 01 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 4.0 x 100 ns, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 02 d9 01 ff
(3V card)
Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
000: df 01
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 07 00 00 00
PCMCIA ID = 0x7, OEM ID = 0x0
Tuple #5, code = 0x15 (Version 1 info), length = 21
000: 04 01 48 49 54 41 43 48 49 00 46 4c 41 53 48 00
010: 35 2e 30 00 ff
Version = 4.1, Manuf = [HITACHI], card vers = [FLASH]
Addit. info = [5.0]
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 04 01
Fixed disk card - POST initialize
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 01
Disk interface: IDE
Tuple #8, code = 0x22 (Functional EXT), length = 3
000: 02 0c 0f
Disk features: Silicon, Unique, Single
Sleep, Standby, Idle, Low power,
Tuple #9, code = 0x1a (Configuration map), length = 5
000: 01 03 00 02 0f
Reg len = 2, config register addr = 0x200, last config = 0x3
Registers: XXXX----
Tuple #10, code = 0x1b (Configuration entry), length = 8
000: c0 40 a1 01 55 08 00 20
Config index = 0x0(default)
Interface byte = 0x40 (memory) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Memory space length = 0x8
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #11, code = 0x1b (Configuration entry), length = 6
000: 00 01 21 b5 1e 4d
Config index = 0x0
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #12, code = 0x1b (Configuration entry), length = 10
000: c1 41 99 01 55 64 f0 ff ff 20
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse, Shared
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 6
000: 01 01 21 b5 1e 4d
Config index = 0x1
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #14, code = 0x1b (Configuration entry), length = 15
000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20
Config index = 0x2(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x1f0 block length = 0x8
I/O address # 2: block start = 0x3f6 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #15, code = 0x1b (Configuration entry), length = 6
000: 02 01 21 b5 1e 4d
Config index = 0x2
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #16, code = 0x1b (Configuration entry), length = 15
000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20
Config index = 0x3(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x170 block length = 0x8
I/O address # 2: block start = 0x376 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #17, code = 0x1b (Configuration entry), length = 6
000: 03 01 21 b5 1e 4d
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #18, code = 0x14 (No link), length = 0
Tuple #19, code = 0xff (Terminator), length = 0
2 slots found
--Boundary-00=_7iCx/8TZ0ZFeWiQ
Content-Type: text/plain;
charset="us-ascii";
name="pccard.conf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="pccard.conf"
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 9
# Available memory slots
memory 0xd4000 96k
# IBM's rebadged Lucent WaveLAN/IEEE. The FCC IDs are identical to
# those for the Lucent card, so presumably everything else is as well.
card "IBM Corporation" "IBM High Rate Wireless LAN PC Card"
config 0x1 "wi" 9
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
card "LT WIN MODEM" "PC card"
config 0x22 "ltmdm" 9
--Boundary-00=_7iCx/8TZ0ZFeWiQ--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200311261444.51549.doconnor>