Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 17 Aug 2000 15:31:16 -0400 (EDT)
From:      David Gilbert <dgilbert@velocet.ca>
To:        freebsd-mobile@freebsd.org
Subject:   Re: Maestro 2E in Fujitsu not configured.
Message-ID:  <14748.15748.488421.762650@trooper.velocet.net>

next in thread | raw e-mail | index | archive | help
OK... I got the 20000817 code and then I got the patch posted recently 
to this list.  I now get:

pcm0: <ESS Technology Maestro-2E> port 0x1000-0x10ff irq 9 at device 13.0 on pci0
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6

As before, the whole boot is:

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #7: Thu Aug 17 13:50:43 EDT 2000
    root@canoe.velocet.ca:/usr/src/sys/compile/CANOE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (448.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 67043328 (65472K bytes)
avail memory = 62287872 (60828K bytes)
Preloaded elf kernel "kernel" at 0xc02f1000.
Preloaded elf module "maestro.ko" at 0xc02f109c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1820-0x182f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at device 7.3 on pci0
pcm0: <ESS Technology Maestro-2E> port 0x1000-0x10ff irq 9 at device 13.0 on pci0
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 15.0 on pci0
pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 15.1 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x044a) at 16.0 irq 9
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown0: <PNP0c02> at port 0x10-0x18,0x1f,0x22,0x24-0x25,0x28-0x29,0x2c-0x2d,0x30-0x31,0x34-0x35,0x38-0x39,0x3c-0x3d,0x50-0x52,0x72-0x77,0x80,0x90-0x9f,0xa4-0xa5,0xa8-0xa9,0xac-0xad,0xb0-0xbd,0x4d0-0x4d1,0xf800-0xf87f,0xf880-0xf8ff,0xfd60-0xfd67,0xff00-0xff3f,0xff80-0xff8f iomem 0xfff00000-0xffffffff on isa0
unknown1: <PNP0c01> at iomem 0-0x9ffff,0xe8000-0xfffff,0x100000-0x3ffffff on isa0
unknown2: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown3: <PNP0800> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown4: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown5: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown6: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown7: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown8: <PNP0c02> at iomem 0xcf800-0xcffff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: <Generic IRDA-compatible device> at port 0x2e8-0x2ef irq 3 on isa0
sio1: type 16550A
unknown: <PNP0400> can't assign resources
unknown9: <PNP0e03> at port 0x3e1-0x3e2 on isa0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 5729MB <FUJITSU MHK2060AT> [12416/15/63] at ata0-master using UDMA33
acd0: CDROM <UJDA170> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
ed0 at port 0x240-0x25f irq 5 slot 0 on pccard0
ed0: address 00:e0:98:74:ec:28, type Linksys (16 bit) 

Dave.

-- 
============================================================================
|David Gilbert, Velocet Communications.       | Two things can only be     |
|Mail:       dgilbert@velocet.net             |  equal if and only if they |
|http://www.velocet.net/~dgilbert             |   are precisely opposite.  |
=========================================================GLO================


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14748.15748.488421.762650>