Date: Fri, 21 Jul 2006 19:09:42 -0400 From: Rich Demanowski <richd@RichDPhoto.com> To: Derrick Ryalls <ryallsd@gmail.com> Cc: freeBSD <freebsd-questions@freebsd.org> Subject: Re: Enabling sound? Message-ID: <44C15EB6.4060801@RichDPhoto.com> In-Reply-To: <d5eb95fc0607211541m6f8beac4o96fb6fc593d305f0@mail.gmail.com> References: <44C14EEB.5030901@RichDPhoto.com> <d5eb95fc0607211526h7ac4f642qce1903a616ab4527@mail.gmail.com> <44C156DA.5060701@RichDPhoto.com> <d5eb95fc0607211541m6f8beac4o96fb6fc593d305f0@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Derrick Ryalls wrote: > On 7/21/06, Rich Demanowski <richd@richdphoto.com> wrote: >> Derrick Ryalls wrote: >> > On 7/21/06, Rich Demanowski <richd@richdphoto.com> wrote: >> >> I just dropped a SoundBlaster Live! card into my box, and have >> followed >> >> the directions in the handbook and the man pages. >> >> >> >> The following lines are in the compiled kernel: >> >> device sound >> >> device snd_emu10k1 >> >> >> >> I don't get the pcm0 lines that section 7.2.2 in the manual talks >> >> about. cat /dev/sndstat returns: >> >> FreeBSD Audio Driver (newpcm) >> >> Installed devices: >> >> and nothing else. >> >> >> >> kldload snd_emu10k1 yields no output whatsoever. When followed by >> cat >> >> /dev/sndstat it produces the same outputs as above. >> >> >> >> kld_load snd_driver yields: >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0x20 >> >> sio1: port may not be enabled >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> >> sio1: port may not be enabled >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> >> sio1: port may not be enabled >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> >> sio1: port may not be enabled >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> >> sio1: port may not be enabled >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> >> sio1: port may not be enabled >> >> ppc0: parallel port not found. >> >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> >> sio1: port may not be enabled >> >> >> >> I recompiled with the sound and emu10k1 drivers commented out, and >> the >> >> kldload and cat /dev/sndstat commands still yield the same. >> >> >> >> I need to get sound enabled on this box, so I can do some online >> >> training provided through streaming video. Please, please, please >> tell >> >> me I don't have to break down and install wankers on this thing ... >> >> >> > >> > I would try this: >> > >> > kldload snd_driver >> > >> > then cat /dev/sndstat to see if perhaps a different driver is needed. >> I tried that. That's what got me all the ppc0 and sio1 errors. >> >> > > Sorry, missed that. Record heat around here. My only other > suggestion would involve a different sound card or possibly try a live > O/S disk to see if the hardware is good. Where/how do I obtain one of those? All I have are the install discs 1 and 2 that I downloaded the iso images for, and all I can get from those is an "emergency holographic shell" that can't even find the ls command, let alone kldload ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44C15EB6.4060801>