Date: Fri, 7 Feb 2003 21:36:38 +0100 From: Thomas Stratmann <strattbo@fsp1.physik.ruhr-uni-bochum.de> To: current@freebsd.org Subject: no disks w/ acpi; long wait pnp_probe w/o acpi Message-ID: <20030207213638.B18577@fsp1.physik.ruhr-uni-bochum.de>
next in thread | raw e-mail | index | archive | help
Hi everyone,
the situation is the same as described in my previous posting, except:
* new kernel from yesterday's sources
* played around a bit with my device.hint, only minor changes.
Dmesg output from two boots is appended. First is an acpi-boot, second
without acpi (unset acpi_load in loader) with location marked where the boot
waits for approx. five minutes. Very annoying.
Can someone see what's going on?
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Fri Feb 7 17:32:10 GMT 2003
root@curdwarf:/usr/src/sys/i386/compile/bootable_dbg
Preloaded elf kernel "/boot/kernel/kernel" at 0xc049a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc049a0b4.
Calibrating clock(s) ... TSC clock: 233259209 Hz, i8254 clock: 1193038 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 233288938 Hz
CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67174400 (64 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004c1000 - 0x04007fff, 62156800 bytes (15175 pages)
avail memory = 60289024 (57 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc5f8
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:90a8 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
Initializing GEOMetry subsystem
wlan: <802.11 Link Layer>
null: <null device, zero device>
mem: <memory & I/O>
random: <entropy source>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0438: *** Error: Looking up [\\_SB_.SBAT] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 0, max = 2, width = 3
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
Using $PIR table, 5 entries at 0xc00f8e80
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.EIO_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0
\\_SB_.PCI0.EIO_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1
\\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0
\\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.EIO_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0
\\_SB_.PCI0.EIO_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1
\\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0
\\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1179, dev=0x0601, revid=0x2e
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa280, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base ffc00000, size 21, enabled
map[18]: type 1, range 32, base ffb00000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000ffe0, size 5, enabled
found-> vendor=0x1179, dev=0x0701, revid=0x22
bus=0, slot=17, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
found-> vendor=0x1179, dev=0x060f, revid=0x20
bus=0, slot=19, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x1179, dev=0x060f, revid=0x20
bus=0, slot=19, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
pci0: <display, VGA> at device 4.0 (no driver attached)
pci0: <simple comms> at device 17.0 (no driver attached)
pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKA)
pcib0: slot 19 INTA is routed to irq 11
pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 19.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: PCI Configuration space:
0x00: 0x060f1179 0x04800003 0x06070020 0x00820000
0x10: 0x88000000 0x04800000 0x00141400 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0420010b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcib0: matched entry for 0.19.INTB (source \\_SB_.PCI0.EIO_.LNKB)
pcib0: slot 19 INTB is routed to irq 11
pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 19.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pcic1: PCI Configuration space:
0x00: 0x060f1179 0x04800003 0x06070020 0x00820000
0x10: 0x88001000 0x04800000 0x00151500 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0420020b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pccard1: <PC Card 16-bit bus (classic)> on pcic1
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x2001 0x2011 0x2011 0x2011
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
Mounting root from ufs:/dev/ad0s3a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> c
Mounting root from c
Can't allocate root mount for filesystem 'c': 19
Root mount failed: 19
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
panic: Root mount failed, startup aborted.
syncing disks, buffers remaining...
done
Uptime: 18s
Terminate ACPI
pcic0: Autodetected 5.0V card
pccard: card inserted, slot 0
pcic0: reset 1 int is 10 stat is ff
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Fri Feb 7 17:32:10 GMT 2003
root@curdwarf:/usr/src/sys/i386/compile/bootable_dbg
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0450000.
Calibrating clock(s) ... TSC clock: 233260140 Hz, i8254 clock: 1193043 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 233288881 Hz
CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67174400 (64 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00477000 - 0x04007fff, 62459904 bytes (15249 pages)
avail memory = 60596224 (57 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc5f8
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:90a8 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
Initializing GEOMetry subsystem
wlan: <802.11 Link Layer>
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
Using $PIR table, 5 entries at 0xc00f8e80
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1179, dev=0x0601, revid=0x2e
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa280, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base ffc00000, size 21, enabled
map[18]: type 1, range 32, base ffb00000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000ffe0, size 5, enabled
found-> vendor=0x1179, dev=0x0701, revid=0x22
bus=0, slot=17, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base fff00000, size 12, enabled
found-> vendor=0x1179, dev=0x060f, revid=0x20
bus=0, slot=19, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 1, range 32, base fff01000, size 12, enabled
found-> vendor=0x1179, dev=0x060f, revid=0x20
bus=0, slot=19, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
pci0: <display, VGA> at device 4.0 (no driver attached)
pci0: <simple comms> at device 17.0 (no driver attached)
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:19 INTA routed to irq 3
pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> mem 0xfff00000-0xfff00fff irq 3 at device 19.0 on pci0
pcic0: PCI Configuration space:
0x00: 0x060f1179 0x04800007 0x06070020 0x00820000
0x10: 0xfff00000 0x04800000 0x00141400 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x04200103
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_search: linked (1) to configured irq 3 at 0:19:0
pci_cfgintr: 0:19 INTB routed to irq 3
pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> mem 0xfff01000-0xfff01fff irq 3 at device 19.1 on pci0
pcic1: PCI Configuration space:
0x00: 0x060f1179 0x04800007 0x06070020 0x00820000
0x10: 0xfff01000 0x04800000 0x00151500 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x04200203
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pccard1: <PC Card 16-bit bus (classic)> on pcic1
isa0: <ISA bus> on motherboard
pnpbios: 16 devices, largest 195 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x400ffff, size=0x3f10000
PNP0c01: adding fixed memory32 range 0x4010000-0x403ffff, size=0x30000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfef80000-0xfeffffff, size=0x80000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 8 device ID PNP0f13 (130fd041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0x1
PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
PNP0c02: adding io range 0x18a0-0x18af, size=0x10, align=0x1
PNP0c02: adding io range 0x18b0-0x18bf, size=0x10, align=0x1
PNP0c02: adding io range 0x18c0-0x18cf, size=0x10, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0x1
PNP0c02: adding io range 0x10e-0x10e, size=0x1, align=0x1
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
PNP0600: adding irq mask 0x4000
pnpbios: handle 12 device ID PNP0600 (0006d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
pnpbios: handle 20 device ID PNP0e03 (030ed041)
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x2
YMH0021: adding dma mask 0x1
pnpbios: handle 22 device ID YMH0021 (2100a865)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x9 0x19 0x19 0x19
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x9 0x9 0x9 0x9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
****long wait****
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37a on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
unknown: <YMH0021> failed to probe at port 0x370-0x371,0x330-0x331,0x388-0x38f,0x530-0x537,0x220-0x22f irq 5 drq 0,1 on isa0
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
pcic0: Event mask 0xe
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK4309MAT/G5.01 D> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1/254/127 s:63 l:4144707
[1] f:00 typ:165 s(CHS):2/0/65 e(CHS):17/254/127 s:4144770 l:257040
[2] f:00 typ:165 s(CHS):18/0/65 e(CHS):4/254/191 s:4401810 l:3903795
[3] f:00 typ:1 s(CHS):5/0/129 e(CHS):14/29/191 s:8305605 l:146475
GEOM: Configure ad0s1, start 32256 length 2122089984 end 2122122239
GEOM: Configure ad0s2, start 2122122240 length 131604480 end 2253726719
GEOM: Configure ad0s3, start 2253726720 length 1998743040 end 4252469759
GEOM: Configure ad0s4, start 4252469760 length 74995200 end 4327464959
GEOM: Add ad0s1 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s1a, start 0 length 2122089984 end 2122089983
GEOM: Configure ad0s1c, start 0 length 2122089984 end 2122089983
pcic0: Autodetected 5.0V card
pccard: card inserted, slot 0
pcic0: reset 1 int is 10 stat is ff
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2c, start 0 length 131604480 end 131604479
GEOM: Add ad0s3 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s3a, start 0 length 1998743040 end 1998743039
GEOM: Configure ad0s3c, start 0 length 1998743040 end 1998743039
GEOM: Add ad0s1a hot[0] start 512 length 276 end 787
GEOM: Add ad0s1c hot[0] start 512 length 276 end 787
GEOM: Add ad0s2c hot[0] start 512 length 276 end 787
GEOM: Add ad0s3a hot[0] start 512 length 276 end 787
GEOM: Add ad0s3c hot[0] start 512 length 276 end 787
Mounting root from ufs:/dev/ad0s3a
Be nice to each other, mmmkay?
start_init: trying /sbin/init
pcic0: reset 1 int is 10 stat is ff
pcic0: Autodetected 5.0V card
pccard: card inserted, slot 0
pcic0: reset 2 int is 70 stat is cf
pcic0: Event mask 0x8
pcic0: reset 3 int is 70 stat is ef
pcic0: reset 0
lock order reversal
1st 0xc126d3f8 process lock (process lock) @ ../../../kern/kern_descrip.c:2104
2nd 0xc126c234 filedesc structure (filedesc structure) @ ../../../kern/kern_descrip.c:2111
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030207213638.B18577>