Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Aug 2007 14:15:36 +0000
From:      Wildes Miranda de Oliveira <wildes@itecgyn.com.br>
To:        freebsd-current@freebsd.org
Subject:   Re: Cant load Marvell Yukon network interface with acpi enabled andAtherosAR5005 with acpi disabled.
Message-ID:  <044112fd226062ed9e5d4ac73ecd1337@localhost>
In-Reply-To: <903f4bc2118c595b4baf82815ea99ca6@localhost>
References:  <903f4bc2118c595b4baf82815ea99ca6@localhost>

next in thread | previous in thread | raw e-mail | index | archive | help
can anyone help me ?

thanks.

On Mon, 6 Aug 2007 22:03:46 +0000, Wildes Miranda de Oliveira <wildes@itecgyn.com.br> wrote:
>> hi list,
>>
>> excuse-me my poorly english.
>>
>> recently i bought one notebook acer aspire 3680, and i have had problems
>> for load network interfaces on them.
>> the problem is that the interface ethernet Marvell Yukon don't load with
>> acpi enabled, and the interface
>> wireless Atheros AR5005 don't load with acpi disabled, with this it´s
>> never load on same bootstrap.
>> i'm annexing informations about dmesg with acpi enabled/disabled ,
>> acpidump and pciconf -lv.
>>
>> i wish ask you about tunning of acpi described in man page. could this
>> solve my problem ?
>>
>> LOADER TUNABLES
>>      Tunables can be set at the loader(8) prompt before booting the
> kernel
>> or
>>      stored in /boot/loader.conf.  Many of these tunables also have a
>> matching
>>
>> hw.acpi.serialize_methods
>>
>>              Allow override of whether methods execute in parallel or
> not.
>>              Enable this for serial behavior, which fixes
>> "AE_ALREADY_EXISTS"
>>              errors for AML that really cannot handle parallel method
>> execu-
>>              tion.  It is off by default since this breaks recursive
>> methods
>>              and some IBMs use such code.
>>
>> hw.pci.link.%s.%d.irq
>>
>>              Override the interrupt to use for this link and index. 
> This
>>              capability should be used carefully, and only if a device
> is
>> not
>>              working with acpi enabled.  "%s" is the name of the link
>> (e.g.,
>>              LNKA).  "%d" is the resource index when the link supports
>> multi-
>>              ple IRQs.  Most PCI links only have one IRQ resource, so
> the
>>              below form should be used.
>>
>> hw.pci.link.%s.irq
>>
>>              Override the interrupt to use.  This capability should be
>> used
>>              carefully, and only if a device is not working with acpi
>> enabled.
>>              "%s" is the name of the link (e.g., LNKA).
>>
>> #=================     ACPI DISABLED
> ====================================
>>
>> Copyright (c) 1992-2007 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> 	The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 7.0-CURRENT-200706 #0: Sun Jun  3 18:41:02 UTC 2007
>>     root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>> WARNING: WITNESS option enabled, expect reduced performance.
>> MPTable: <INTEL    Napa ERB    >
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: Intel(R) Celeron(R) M CPU        430  @ 1.73GHz (1733.41-MHz
>> 686-class CPU)
>>   Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
>>
>>
> Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>>   Features2=0xc109<SSE3,MON,TM2,xTPR,PDCM>
>>   AMD Features=0x100000<NX>
>> real memory  = 526974976 (502 MB)
>> avail memory = 501780480 (478 MB)
>> ioapic0: Assuming intbase of 0
>> ioapic0 <Version 2.0> irqs 0-23 on motherboard
>> kbd1 at kbdmux0
>> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
> RF5413)
>> cpu0 on motherboard
>> pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
>> pci0: <PCI bus> on pcib0
>> vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
>> 0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0300000-0xd033ffff irq 16
> at
>> device 2.0 on pci0
>> agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
>> agp0: detected 7932k stolen memory
>> agp0: aperture size is 256M
>> vgapci1: <VGA-compatible display> mem 0xd0280000-0xd02fffff at device
> 2.1
>> on pci0
>> pci0: <multimedia> at device 27.0 (no driver attached)
>> pcib1: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0
>> pci2: <PCI bus> on pcib1
>> mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> port 0x2000-0x20ff mem
>> 0xd0100000-0xd0103fff irq 16 at device 0.0 on pci2
>> msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0
>> msk0: Ethernet address: 00:16:36:d1:56:ce
>> miibus0: <MII bus> on msk0
>> e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
>> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> ukphy0: <Generic IEEE 802.3u media interface> PHY 3 on miibus0
>> ukphy0:  no media present
>> ukphy1: <Generic IEEE 802.3u media interface> PHY 6 on miibus0
>> ukphy1:  no media present
>> mskc0: [FILTER]
>> pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
>> pci3: <PCI bus> on pcib2
>> pcib3: <PCI-PCI bridge> irq 18 at device 28.2 on pci0
>> pci4: <PCI bus> on pcib3
>> pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
>> pci5: <PCI bus> on pcib4
>> uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at
> device
>> 29.0 on pci0
>> uhci0: [GIANT-LOCKED]
>> uhci0: [ITHREAD]
>> usb0: <UHCI (generic) USB controller> on uhci0
>> usb0: USB revision 1.0
>> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>> uhub0: 2 ports with 2 removable, self powered
>> uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at
> device
>> 29.1 on pci0
>> uhci1: [GIANT-LOCKED]
>> uhci1: [ITHREAD]
>> usb1: <UHCI (generic) USB controller> on uhci1
>> usb1: USB revision 1.0
>> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>> uhub1: 2 ports with 2 removable, self powered
>> uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at
> device
>> 29.2 on pci0
>> uhci2: [GIANT-LOCKED]
>> uhci2: [ITHREAD]
>> usb2: <UHCI (generic) USB controller> on uhci2
>> usb2: USB revision 1.0
>> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>> uhub2: 2 ports with 2 removable, self powered
>> uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at
> device
>> 29.3 on pci0
>> uhci3: [GIANT-LOCKED]
>> uhci3: [ITHREAD]
>> usb3: <UHCI (generic) USB controller> on uhci3
>> usb3: USB revision 1.0
>> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>> uhub3: 2 ports with 2 removable, self powered
>> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
>> 0xd0544000-0xd05443ff irq 23 at device 29.7 on pci0
>> ehci0: [GIANT-LOCKED]
>> ehci0: [ITHREAD]
>> usb4: EHCI version 1.0
>> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
>> usb4: USB revision 2.0
>> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
>> uhub4: 8 ports with 8 removable, self powered
>> pcib5: <MPTable PCI-PCI bridge> at device 30.0 on pci0
>> pci10: <PCI bus> on pcib5
>> ath0: <Atheros 5212> mem 0xd0000000-0xd000ffff at device 3.0 on pci10
>> pcib5: unable to route slot 3 INTA
>> ath0: could not map interrupt
>> device_attach: ath0 attach returned 6
>> cbb0: <PCI-CardBus Bridge> mem 0xd0014000-0xd0014fff irq 20 at device
> 9.0
>> on pci10
>> cardbus0: <CardBus bus> on cbb0
>> pccard0: <16-bit PCCard bus> on cbb0
>> cbb0: [ITHREAD]
>> pci10: <mass storage> at device 9.2 (no driver attached)
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <Intel ICH7M SATA300 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
>> ata0: <ATA channel 0> on atapci0
>> ata0: [ITHREAD]
>> ata1: <ATA channel 1> on atapci0
>> ata1: [ITHREAD]
>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>> pmtimer0 on isa0
>> orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xdf800-0xdffff pnpid
>> ORM0000 on isa0
>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> atkbd0: [ITHREAD]
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> psm0: [GIANT-LOCKED]
>> psm0: [ITHREAD]
>> psm0: model Generic PS/2 mouse, device ID 0
>> ppc0: parallel port not found.
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> sio0: port may not be enabled
>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> sio0: port may not be enabled
>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>> sio0: type 8250 or not responding
>> sio0: [FILTER]
>> sio1: configured irq 3 not in bitmap of probed irqs 0
>> sio1: port may not be enabled
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
>> unknown: <PNP0c01> can't assign resources (memory)
>> unknown: <PNP0303> can't assign resources (port)
>> unknown: <PNP0c02> can't assign resources (memory)
>> unknown: <PNP0c02> can't assign resources (memory)
>> unknown: <PNP0c02> can't assign resources (memory)
>> unknown: <PNP0c02> can't assign resources (memory)
>> unknown: <INT0800> can't assign resources (memory)
>> unknown: <PNP0f13> can't assign resources (irq)
>> Timecounter "TSC" frequency 1733412980 Hz quality 800
>> Timecounters tick every 1.000 msec
>> ad0: 76319MB <TOSHIBA MK8034GSX AH301J> at ata0-master SATA150
>> acd0: CDRW <TSSTcorpCDW/DVD TS-L462D/AC01> at ata1-master UDMA33
>> GEOM_LABEL: Label for provider ad0s3 is msdosfs/DADOS.
>> Trying to mount root from ufs:/dev/ad0s1a
>> msk0: link state changed to UP
>>
>> #====================== ACPI ENABLED
> ====================================
>>
>> Copyright (c) 1992-2007 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> 	The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 7.0-CURRENT-200706 #0: Sun Jun  3 18:41:02 UTC 2007
>>     root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>> WARNING: WITNESS option enabled, expect reduced performance.
>> ACPI APIC Table: <INTEL  CALISTGA>
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: Intel(R) Celeron(R) M CPU        430  @ 1.73GHz (1733.41-MHz
>> 686-class CPU)
>>   Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
>>
>>
> Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>>   Features2=0xc109<SSE3,MON,TM2,xTPR,PDCM>
>>   AMD Features=0x100000<NX>
>> real memory  = 526974976 (502 MB)
>> avail memory = 501760000 (478 MB)
>> ioapic0 <Version 2.0> irqs 0-23 on motherboard
>> kbd1 at kbdmux0
>> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
> RF5413)
>> acpi0: <ACRSYS ACRPRDCT> on motherboard
>> acpi0: [ITHREAD]
>> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
>> acpi0
>> Timecounter "HPET" frequency 14318180 Hz quality 2000
>> acpi0: Power Button (fixed)
>> unknown: I/O range not supported
>> acpi0: reservation of fed00000, 400 (3) failed
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> acpi_throttle0: <ACPI CPU Throttling> on cpu0
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
>> 0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0300000-0xd033ffff irq 16
> at
>> device 2.0 on pci0
>> agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
>> agp0: detected 7932k stolen memory
>> agp0: aperture size is 256M
>> vgapci1: <VGA-compatible display> mem 0xd0280000-0xd02fffff at device
> 2.1
>> on pci0
>> pci0: <multimedia> at device 27.0 (no driver attached)
>> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>> pci2: <ACPI PCI bus> on pcib1
>> mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 16 at device 0.0 on
>> pci2
>> mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
>> mskc0: unknown device: id=0x00, rev=0x00
>> device_attach: mskc0 attach returned 6
>> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>> pci3: <ACPI PCI bus> on pcib2
>> pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
>> pci4: <ACPI PCI bus> on pcib3
>> uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at
> device
>> 29.0 on pci0
>> uhci0: [GIANT-LOCKED]
>> uhci0: [ITHREAD]
>> usb0: <UHCI (generic) USB controller> on uhci0
>> usb0: USB revision 1.0
>> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>> uhub0: 2 ports with 2 removable, self powered
>> uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at
> device
>> 29.1 on pci0
>> uhci1: [GIANT-LOCKED]
>> uhci1: [ITHREAD]
>> usb1: <UHCI (generic) USB controller> on uhci1
>> usb1: USB revision 1.0
>> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>> uhub1: 2 ports with 2 removable, self powered
>> uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at
> device
>> 29.2 on pci0
>> uhci2: [GIANT-LOCKED]
>> uhci2: [ITHREAD]
>> usb2: <UHCI (generic) USB controller> on uhci2
>> usb2: USB revision 1.0
>> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>> uhub2: 2 ports with 2 removable, self powered
>> uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at
> device
>> 29.3 on pci0
>> uhci3: [GIANT-LOCKED]
>> uhci3: [ITHREAD]
>> usb3: <UHCI (generic) USB controller> on uhci3
>> usb3: USB revision 1.0
>> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>> uhub3: 2 ports with 2 removable, self powered
>> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
>> 0xd0544000-0xd05443ff irq 23 at device 29.7 on pci0
>> ehci0: [GIANT-LOCKED]
>> ehci0: [ITHREAD]
>> usb4: EHCI version 1.0
>> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
>> usb4: USB revision 2.0
>> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
>> uhub4: 8 ports with 8 removable, self powered
>> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> pci10: <ACPI PCI bus> on pcib4
>> ath0: <Atheros 5212> mem 0xd0000000-0xd000ffff at device 3.0 on pci10
>> ath0: [ITHREAD]
>> ath0: using obsoleted if_watchdog interface
>> ath0: Ethernet address: 00:19:7d:47:ed:84
>> ath0: mac 7.8 phy 4.5 radio 5.6
>> cbb0: <PCI-CardBus Bridge> mem 0xd0014000-0xd0014fff irq 20 at device
> 9.0
>> on pci10
>> cardbus0: <CardBus bus> on cbb0
>> pccard0: <16-bit PCCard bus> on cbb0
>> cbb0: [ITHREAD]
>> pci10: <mass storage> at device 9.2 (no driver attached)
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <Intel ICH7M SATA300 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
>> ata0: <ATA channel 0> on atapci0
>> ata0: [ITHREAD]
>> ata1: <ATA channel 1> on atapci0
>> ata1: [ITHREAD]
>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>> acpi_acad0: <AC Adapter> on acpi0
>> battery0: <ACPI Control Method Battery> on acpi0
>> acpi_lid0: <Control Method Lid Switch> on acpi0
>> acpi_button0: <Power Button> on acpi0
>> acpi_button1: <Sleep Button> on acpi0
>> acpi_tz0: <Thermal Zone> on acpi0
>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> atkbd0: [ITHREAD]
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> psm0: [GIANT-LOCKED]
>> psm0: [ITHREAD]
>> psm0: model Generic PS/2 mouse, device ID 0
>> pmtimer0 on isa0
>> orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xdf800-0xdffff pnpid
>> ORM0000 on isa0
>> ppc0: parallel port not found.
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> sio0: port may not be enabled
>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> sio0: port may not be enabled
>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>> sio0: type 8250 or not responding
>> sio0: [FILTER]
>> sio1: configured irq 3 not in bitmap of probed irqs 0
>> sio1: port may not be enabled
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
>> Timecounter "TSC" frequency 1733409431 Hz quality 800
>> Timecounters tick every 1.000 msec
>> ad0: 76319MB <TOSHIBA MK8034GSX AH301J> at ata0-master SATA150
>> acd0: CDRW <TSSTcorpCDW/DVD TS-L462D/AC01> at ata1-master UDMA33
>> GEOM_LABEL: Label for provider ad0s3 is msdosfs/DADOS.
>> Trying to mount root from ufs:/dev/ad0s1a
>>
>> #======================== PCICONF -LV
> ====================================
>>
>> hostb0@pci0:0:0:	class=0x060000 card=0x01101025 chip=0x27a08086 rev=0x03
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '955XM/945GM/PM/GMS/940GML Express Processor to DRAM
>> Controller'
>>     class      = bridge
>>     subclass   = HOST-PCI
>> vgapci0@pci0:2:0:	class=0x030000 card=0x01101025 chip=0x27a28086
> rev=0x03
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = 'Mobile Integrated Graphics Controller'
>>     class      = display
>>     subclass   = VGA
>> vgapci1@pci0:2:1:	class=0x038000 card=0x01101025 chip=0x27a68086
> rev=0x03
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = 'Mobile Integrated Graphics Controller'
>>     class      = display
>> none0@pci0:27:0:	class=0x040300 card=0x01101025 chip=0x27d88086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) High Definition Audio'
>>     class      = multimedia
>> pcib1@pci0:28:0:	class=0x060400 card=0x01101025 chip=0x27d08086 rev=0x02
>> hdr=0x01
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) PCI Express Root Port'
>>     class      = bridge
>>     subclass   = PCI-PCI
>> pcib2@pci0:28:1:	class=0x060400 card=0x01101025 chip=0x27d28086 rev=0x02
>> hdr=0x01
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) PCI Express Root Port'
>>     class      = bridge
>>     subclass   = PCI-PCI
>> pcib3@pci0:28:2:	class=0x060400 card=0x01101025 chip=0x27d48086 rev=0x02
>> hdr=0x01
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) PCI Express Root Port'
>>     class      = bridge
>>     subclass   = PCI-PCI
>> uhci0@pci0:29:0:	class=0x0c0300 card=0x01101025 chip=0x27c88086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) USB Universal Host Controller'
>>     class      = serial bus
>>     subclass   = USB
>> uhci1@pci0:29:1:	class=0x0c0300 card=0x01101025 chip=0x27c98086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) USB Universal Host Controller'
>>     class      = serial bus
>>     subclass   = USB
>> uhci2@pci0:29:2:	class=0x0c0300 card=0x01101025 chip=0x27ca8086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) USB Universal Host Controller'
>>     class      = serial bus
>>     subclass   = USB
>> uhci3@pci0:29:3:	class=0x0c0300 card=0x01101025 chip=0x27cb8086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) USB Universal Host Controller'
>>     class      = serial bus
>>     subclass   = USB
>> ehci0@pci0:29:7:	class=0x0c0320 card=0x01101025 chip=0x27cc8086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
>>     class      = serial bus
>>     subclass   = USB
>> pcib4@pci0:30:0:	class=0x060401 card=0x01101025 chip=0x24488086 rev=0xe2
>> hdr=0x01
>>     vendor     = 'Intel Corporation'
>>     device     = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
>> Bridge'
>>     class      = bridge
>>     subclass   = PCI-PCI
>> isab0@pci0:31:0:	class=0x060100 card=0x01101025 chip=0x27b98086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801GBM (ICH7-M) LPC Interface Controller'
>>     class      = bridge
>>     subclass   = PCI-ISA
>> atapci0@pci0:31:2:	class=0x010180 card=0x01101025 chip=0x27c48086
> rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage
>> Controller'
>>     class      = mass storage
>>     subclass   = ATA
>> none1@pci0:31:3:	class=0x0c0500 card=0x01101025 chip=0x27da8086 rev=0x02
>> hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82801G (ICH7 Family) SMBus Controller'
>>     class      = serial bus
>>     subclass   = SMBus
>> mskc0@pci2:0:0:	class=0x020000 card=0x01101025 chip=0x435211ab rev=0x14
>> hdr=0x00
>>     vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>>     device     = 'Yukon 88E8038 PCI-E Fast Ethernet Controller'
>>     class      = network
>>     subclass   = ethernet
>> ath0@pci10:3:0:	class=0x020000 card=0x04181468 chip=0x001a168c rev=0x01
>> hdr=0x00
>>     vendor     = 'Atheros Communications Inc.'
>>     device     = 'Atheros AR5005G Atheros AR5005G 802.11abg NIC Chipset'
>>     class      = network
>>     subclass   = ethernet
>> cbb0@pci10:9:0:	class=0x060700 card=0x01101025 chip=0x8039104c rev=0x00
>> hdr=0x02
>>     vendor     = 'Texas Instruments (TI)'
>>     device     = 'PCIxx12 Cardbus Controller'
>>     class      = bridge
>>     subclass   = PCI-CardBus
>> none2@pci10:9:2:	class=0x018000 card=0x01101025 chip=0x803b104c rev=0x00
>> hdr=0x00
>>     vendor     = 'Texas Instruments (TI)'
>>     device     = 'PCIxx12 Integrated Flash Media Controller'
>>     class      = mass storage




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?044112fd226062ed9e5d4ac73ecd1337>