Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Jul 1995 10:44:40 +0200
From:      j@bonnie.heep.sax.de (J Wunsch)
To:        chat@freebsd.org
Subject:   Re: FBSD 2.0.5 / XF86 3.11 Performance
Message-ID:  <199507280844.KAA02710@bonnie.tcd-dresden.de>
In-Reply-To: <PHILS.95Jul25221207@satori.tv.tek.com>
References:  <PHILS.95Jul25144451@satori.tv.tek.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Something for the curiosity corner:  8^)

In article <PHILS.95Jul25221207@satori.tv.tek.com> you write:
>In article <PHILS.95Jul25144451@satori.tv.tek.com> phils@satori.tv.tek.com (Phil Staub) writes:
>
>> 
>> Having just installed FreeBSD 2.0.5 and XFree86 3.1.1 on my system, I
>> was somewhat dismayed to see that graphics performance seems to have
>> slowed by about 2/3 from FBSD 2.0R and XFree86 3.1. I'm using the S3
>> server in 1024x768 or 1152x900 resolution on a 2 meg #9 GXE64 (not
>> Pro). The processor is a 486DX266 with 16 Meg of ram.
>> 
>
>My son seems to have accidently stumbled onto an interesting piece of
>information.
>
>He wanted to see how slowly xengine would run when he toggled the turbo
>switch to the "slow" position. Imagine his surprise (and mine) when it
>went back up to the speed I'm used to seeing it run at! This is in
>spite of the fact that the turbo light went off and the speed display
>changed to slow speed.
>
>I now suspect that something in the boot sequence is reading the
>switch and mis-interpreting its setting, then setting a control
>register to low speed. Either that or unconditionally setting the
>register to low speed, regardless of the state of the switch.
>
>Can someone comment on this hypothesis?
>
>Thanks,
>Phil
>
>--
>------------------------------------------------------------------------------
>Phil Staub, phils@tv.tv.tek.com
>TV/Communications Test Division
>(503) 627-6910


-- 
cheers, J"org                      private:   joerg_wunsch@uriah.heep.sax.de
                                   http://www.sax.de/~joerg/

Never trust an operating system you don't have sources for. ;-)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199507280844.KAA02710>