Date: Mon, 11 Mar 1996 10:30:11 -0700 From: joerg@pharmacy.isu.edu (Joerg Senekowitsch) To: questions@FreeBSD.org Subject: Fatal Trap 12 during install on HP Vectra Message-ID: <v01540b0fad6a13079a21@[134.50.8.1]>
next in thread | raw e-mail | index | archive | help
>Date: Mon, 11 Mar 1996 10:13:40 -0700 >To:questions@FreeBSD.org >From:joerg@pharmacy.isu.edu (Joerg Senekowitsch) >Subject:Fatal Trap 12 during install on HP Vectra > >Hello FreeBSD! > >I'm trying to install FreeBSD-2.1.0 on a HP Vectra 486VL/25 (a 486SX >processor). The machine has 8MB RAM, a 120MB Quantum IDE disk, and an >Intel EtherExpress 16TP network board (supported). I've downloaded the >latest boot floppy and disabled almost everything in the "-c" >configuration except the floppy, hard disk, ethernet board (otherwise >FreeBSD mistakes the EtherExpress for a Mitsumi CD ROM ?!). > >Doing a "novice" install and dedicating the whole disk to FreeBSD (using a >16MB swap partition and the rest goes to "/") I select FTP as install >medium. The board is configured at IRQ 10, PORT 300, IP 134.50.8.10 >(pills.isu.edu), the gateway, DNS server, and netmask are set correctly (I >know, I'm the net admin :-). > >Anyway, soon as the install procedure hits the > >DEBUGL init ix0....... > >message I get a > >FATAL Trap 12: Page fault in kernel mode... > > >Anyway, appreciate your help, > >Joerg > Sorry to follow-up on my own message. Checked the network board again and it had a) autodetect connector (changed it to RJ-45) b) FlashBIOS enabled (changed to disable) Now the install seems to run..... Thanks, Joerg
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?v01540b0fad6a13079a21>