Date: Sun, 3 Feb 2002 21:36:18 +0100 (MET) From: Thomas Schuerger <schuerge@wjpserver.CS.Uni-SB.DE> To: freebsd-questions@freebsd.org Subject: Kernel compilation fails Message-ID: <200202032036.g13KaIM11709@wjpserver.cs.uni-sb.de>
next in thread | raw e-mail | index | archive | help
--ELM71824227<-11636-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi! I've updated /usr/src to 4.5-Stable, built and installed world and then tried to compile the kernel. Kernel compilation fails with: -------- cc -c -O3 -march=pentiumpro -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensi ons -ansi -nostdinc -I- -I. -I/new/usr.src/sys -I/new/usr.src/sys/../include -I/new/usr.src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-b oundary=2 /new/usr.src/sys/dev/aic7xxx/aic7xxx_93cx6.c cc -c -O3 -march=pentiumpro -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensi ons -ansi -nostdinc -I- -I. -I/new/usr.src/sys -I/new/usr.src/sys/../include -I/new/usr.src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-b oundary=2 /new/usr.src/sys/dev/aic7xxx/aic7xxx_freebsd.c cc -c -O3 -march=pentiumpro -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensi ons -ansi -nostdinc -I- -I. -I/new/usr.src/sys -I/new/usr.src/sys/../include -I/new/usr.src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-b oundary=2 /new/usr.src/sys/dev/aic7xxx/aic7xxx_pci.c cc -c -O3 -march=pentiumpro -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensi ons -ansi -nostdinc -I- -I. -I/new/usr.src/sys -I/new/usr.src/sys/../include -I/new/usr.src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-b oundary=2 setdef0.c cc -c -O3 -march=pentiumpro -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensi ons -ansi -nostdinc -I- -I. -I/new/usr.src/sys -I/new/usr.src/sys/../include -I/new/usr.src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-b oundary=2 setdef1.c sh /new/usr.src/sys/conf/newvers.sh STARFIRE cc -c -O3 -march=pentiumpro -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensi ons -ansi -nostdinc -I- -I. -I/new/usr.src/sys -I/new/usr.src/sys/../include -I/new/usr.src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-b oundary=2 vers.c linking kernel if_ed.o: In function `ed_init': if_ed.o(.text+0x2912): undefined reference to `mii_mediachg' if_ed.o: In function `ed_ifmedia_upd': if_ed.o(.text+0x5130): undefined reference to `mii_mediachg' if_ed.o: In function `ed_ifmedia_sts': if_ed.o(.text+0x5162): undefined reference to `mii_pollstat' if_ed.o: In function `ed_tick': if_ed.o(.text+0x5239): undefined reference to `mii_tick' *** Error code 1 1 error *** Error code 2 1 error *** Error code 2 1 error Exit 2 --------- I've also retried fetching and compiling all stuff again. The same errors are produced. I've attached my config file called "STARFIRE". Any help is appreciated! Greetings, Thomas. --ELM71824227<-11636-0_ Content-Type: text/plain; charset=US-ASCII Content-Disposition: attachment; filename=STARFIRE Content-Description: /home/schuerge/STARFIRE Content-Transfer-Encoding: 7bit # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.4 2000/05/14 10:40:27 groudier Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU1 #cpu I586_CPU cpu I686_CPU ident STARFIRE maxusers 128 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem #options MD_ROOT #MD is a potential root device options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=1500 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options USER_LDT options NETSMB options LIBMCHAIN options LIBICONV options INCLUDE_CONFIG_FILE options UFS_DIRHASH #options QUOTA #options VESA # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives #device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives #options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management device apm0 # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports #device sio0 at isa? port IO_COM1 flags 0x10 irq 4 #device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at pci? #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty 64 # Pseudo-ttys (telnet etc) #pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet options SOFTUPDATES # sound device pcm #pseudo-device i4b # needed for T-DSL options NETGRAPH options NETGRAPH_ETHER options NETGRAPH_SOCKET options NETGRAPH_PPPOE --ELM71824227<-11636-0_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202032036.g13KaIM11709>