Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 Aug 2003 22:54:10 -0500
From:      Chip Norkus <wd@arpa.com>
To:        current@freebsd.org
Subject:   aac related panics
Message-ID:  <200308292254.10897.wd@arpa.com>

next in thread | raw e-mail | index | archive | help

--Boundary-00=_i/BU/Edoh0MxpGs
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


Hi all,

I've got a Dell Poweredge 2650 which I recently installed 5.1-R on.  That 
worked fine, and so I did a cvsup to get to 5.1-C as of about noon today. 
When I rebooted with the new kernel my system paniced before even 
finishing the kernel boot with the following:

command 0xca6df000 not in queue, flags = 0x20, bit = 0x80
panic: command not in queue
cpuid = 0; 1apic.id = 00000000

then it tried to shutdown the aac0 controller which failed.  I've attached 
my kernel config below.  I've also tried it with a non-SMP kernel and had 
the same results.  I haven't tried using DISABLE_PSE or DISBALE_PG_G, but 
I will do so in a bit and report back if my condition improves.

My company is working on a new hosting infrastructure, and I'd like to use 
FreeBSD if possible, so any help at all would be greatly appreciated as 
we plan to use these machines for some time.


-wd
-- 
chip norkus; renaissance hacker;                wd@arpa.com
"question = (to) ? be : !be;" --Shakespeare     http://telekinesis.org/

--Boundary-00=_i/BU/Edoh0MxpGs
Content-Type: text/plain;
  charset="us-ascii";
  name="dell2650"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="dell2650"

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.387 2003/08/24 09:30:13 sos Exp $

machine		i386
cpu		I686_CPU
ident		dell2650

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
makeoptions	MODULES_OVERRIDE="acpi linux"

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	NFSCLIENT		#Network Filesystem Client
options 	NFSSERVER		#Network Filesystem Server
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	CD9660			#ISO 9660 Filesystem
#options 	PROCFS			#Process filesystem (requires PSEUDOFS)
#options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# Debugging for use in -current
options 	DDB			#Enable the kernel debugger
options		DDB_UNATTENDED

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atapicd			# ATAPI CDROM drives
options 	ATA_STATIC_ID		#Static device numbering

# RAID controllers interfaced to the SCSI subsystem
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		ciss		# Compaq Smart RAID 5*
device		dpt		# DPT Smartcache III, IV - See NOTES for options!
device		iir		# Intel Integrated RAID
device		mly		# Mylex AcceleRAID/eXtremeRAID

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers
device		aac		# Adaptec FSA RAID
device		aacp		# SCSI passthrough for aac (requires CAM)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		bge		# Broadcom BCM570xx Gigabit Ethernet

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter


--Boundary-00=_i/BU/Edoh0MxpGs--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308292254.10897.wd>