Date: Mon, 17 May 2004 10:46:21 -0700 From: "Kevin Oberman" <oberman@es.net> To: Edwin Culp <eculp@encontacto.net> Cc: current@freebsd.org Subject: Re: ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=0 Message-ID: <20040517174621.34F955D0A@ptavv.es.net> In-Reply-To: Your message of "Mon, 17 May 2004 12:38:55 CDT." <20040517123855.s3s4gg4swckcogok@mail.encontacto.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> Date: Mon, 17 May 2004 12:38:55 -0500 > From: Edwin Culp <eculp@encontacto.net> > Sender: owner-freebsd-current@freebsd.org > > I'm running current as of yesterday. I connected an older > current disk [probably 6 months] that has some important > information. I thought that it would be trivial to mount it and > copy the info to my current disk. I tried and am getting: > > ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> > error=84<ICRC,ABORTED> LBA=0 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> > error=84<ICRC,ABORTED> LBA=0 > > Could this be caused by changes in current, a configuration issue > that I'm missing or is it a probable hardware failure? Probably not a useful suggestion, but is the disk jumpered as MASTER? 'ad2' is normally the master of the second IDE bus. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040517174621.34F955D0A>