Date: Wed, 3 Apr 2002 19:12:00 -0500 From: mpd <mpd6334@cs.rit.edu> To: Peter Leftwich <Hostmaster@Video2Video.Com> Cc: FreeBSD Questions <FreeBSD-Questions@FreeBSD.Org> Subject: Re: XF86 4.2.0 "xf86cfg" command, one day at a time :( Message-ID: <20020403191200.A70232@rochester.rr.com> In-Reply-To: <20020403155245.H210-200000@66-75-1-142.san.rr.com>; from Hostmaster@Video2Video.Com on Wed, Apr 03, 2002 at 03:59:39PM -0800 References: <20020403155245.H210-200000@66-75-1-142.san.rr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Apr 03, 2002 at 03:59:39PM -0800, Peter Leftwich wrote:
> prompt# whoami
> root
>
> prompt# xf86cfg
> {stuff happens, screen turns blank and crackly noises are heard, I do C-A-BS to crash the server}
>
> prompt# echo "A few seconds later" >> /dev/null ; ls -al /var/log/XFree86.8.log
> -rw-r--r-- 1 root wheel 36540 Apr 3 15:49 /var/log/XFree86.8.log
>
> prompt# wc -l /var/log/XFree86.8.log
> 690 /var/log/XFree86.8.log
>
> I have attached /var/log/XFree86.8.log (odd, I only have 8 and 0 in
> /var/log) and wonder
>
> [1] Why is this logfile necessarily 690 lines?! and
Because 690 lines was necessary to convey the information.
>
> [2] Right off the bat, does it matter that this line:
> Build Operating System: FreeBSD 4.4-RELEASE-p1 i386 [ELF]
> ... does not say FreeBSD 4.5-RELEASE as that is my OS?
Did you install binary packages? The Build Operating System is
just that: the operating system X was *built* on. It may or
may not cause problems. It shouldn't in this case.
The only errors I saw in the log were that dri wasn't enabled
(which shouldn't crash anything) and that /dev/mouse was
already in use (presumably by the mouse daemon. The correct
device to use in that case is /dev/sysmouse.)
> --
> Peter Leftwich
mike
Content-Description: XFree86.8.log
>
> XFree86 Version 4.2.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 18 January 2002
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: FreeBSD 4.4-RELEASE-p1 i386 [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.8.log", Time: Wed Apr 3 15:49:22 2002
> (++) Using config file: "/root/XF86Config.new"
> (==) ServerLayout "XFree86 Configured"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "Card0"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (==) Keyboard: CustomKeycode disabled
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (**) ModulePath set to "/usr/X11R6/lib/modules"
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.5
> XFree86 XInput driver : 0.3
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.3
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1022,7006 card 0000,0000 rev 25 class 06,00,00 hdr 80
> (II) PCI: 00:01:0: chip 1022,7007 card 0000,0000 rev 01 class 06,04,00 hdr 81
> (II) PCI: 00:07:0: chip 1022,7408 card 0000,0000 rev 01 class 06,01,00 hdr 80
> (II) PCI: 00:07:1: chip 1022,7409 card 0000,0000 rev 03 class 01,01,8a hdr 00
> (II) PCI: 00:07:3: chip 1022,740b card 0000,0000 rev 03 class 06,80,00 hdr 00
> (II) PCI: 00:07:4: chip 1022,740c card 0000,0000 rev 06 class 0c,03,10 hdr 00
> (II) PCI: 00:08:0: chip 10b7,9004 card 10b7,9004 rev 04 class 02,00,00 hdr 00
> (II) PCI: 00:09:0: chip 1102,0002 card 1102,8027 rev 07 class 04,01,00 hdr 80
> (II) PCI: 00:09:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
> (II) PCI: 00:0a:0: chip 104c,8019 card 0000,0000 rev 00 class 0c,00,10 hdr 00
> (II) PCI: 01:05:0: chip 1002,5246 card 1002,0068 rev 00 class 03,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set)
> (II) Bus 1 I/O range:
> [0] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [1] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
> [2] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
> [3] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (--) PCI:*(1:5:0) ATI Rage 128 RF rev 0, Mem @ 0xe0000000/26, 0xe5000000/14, I/O @ 0xd000/8
> (II) Addressable bus resource ranges are
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 0xe7000000 - 0xe7ffffff (0x1000000) MX[B]E
> [1] -1 0xe7006000 - 0xe7007fff (0x2000) MX[B]E
> [2] -1 0xe7004000 - 0xe7007fff (0x4000) MX[B]E
> [3] -1 0xe7007000 - 0xe7007fff (0x1000) MX[B]E
> [4] -1 0xe7005000 - 0xe7005fff (0x1000) MX[B]E
> [5] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
> [6] -1 0xe5000000 - 0xe5003fff (0x4000) MX[B](B)
> [7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
> [8] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
> [9] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [10] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
> [11] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
> [12] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
> [13] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> (II) PCI Memory resource overlap reduced 0xe7000000 from 0xe7ffffff to 0xe7003fff
> (II) PCI Memory resource overlap reduced 0xe7006000 from 0xe7007fff to 0xe7006fff
> (II) PCI Memory resource overlap reduced 0xe7004000 from 0xe7007fff to 0xe7004fff
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0xe7000000 - 0xe7003fff (0x4000) MX[B]E
> [1] -1 0xe7006000 - 0xe7006fff (0x1000) MX[B]E
> [2] -1 0xe7004000 - 0xe7004fff (0x1000) MX[B]E
> [3] -1 0xe7007000 - 0xe7007fff (0x1000) MX[B]E
> [4] -1 0xe7005000 - 0xe7005fff (0x1000) MX[B]E
> [5] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
> [6] -1 0xe5000000 - 0xe5003fff (0x4000) MX[B](B)
> [7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
> [8] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
> [9] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [10] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
> [11] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
> [12] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
> [13] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe7000000 - 0xe7003fff (0x4000) MX[B]E
> [6] -1 0xe7006000 - 0xe7006fff (0x1000) MX[B]E
> [7] -1 0xe7004000 - 0xe7004fff (0x1000) MX[B]E
> [8] -1 0xe7007000 - 0xe7007fff (0x1000) MX[B]E
> [9] -1 0xe7005000 - 0xe7005fff (0x1000) MX[B]E
> [10] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
> [11] -1 0xe5000000 - 0xe5003fff (0x4000) MX[B](B)
> [12] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
> [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [15] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
> [16] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [17] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
> [18] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
> [19] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
> [20] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.13.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension RECORD
> (II) LoadModule: "xtrap"
> (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
> (II) Module xtrap: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DEC-XTRAP
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Speedo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "ati"
> (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
> (II) Module ati: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 6.4.8
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.5
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.3
> (II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
> ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
> ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
> ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
> ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
> ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> ATI Rage 128 Mobility ML (AGP)
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
> ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
> ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
> ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
> ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
> ATI Radeon 7500 QW (AGP)
> (II) Primary Device is: PCI 01:05:0
> (II) ATI: Candidate "Device" section "Card0".
> (--) Chipset ATI Rage 128 RF (AGP) found
> (II) Loading sub module "r128"
> (II) LoadModule: "r128"
> (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
> (II) Module r128: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 4.0.1
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.5
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe7000000 - 0xe7003fff (0x4000) MX[B]E
> [6] -1 0xe7006000 - 0xe7006fff (0x1000) MX[B]E
> [7] -1 0xe7004000 - 0xe7004fff (0x1000) MX[B]E
> [8] -1 0xe7007000 - 0xe7007fff (0x1000) MX[B]E
> [9] -1 0xe7005000 - 0xe7005fff (0x1000) MX[B]E
> [10] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
> [11] -1 0xe5000000 - 0xe5003fff (0x4000) MX[B](B)
> [12] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
> [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [15] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
> [16] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [17] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
> [18] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
> [19] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
> [20] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> (II) resource ranges after probing:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe7000000 - 0xe7003fff (0x4000) MX[B]E
> [6] -1 0xe7006000 - 0xe7006fff (0x1000) MX[B]E
> [7] -1 0xe7004000 - 0xe7004fff (0x1000) MX[B]E
> [8] -1 0xe7007000 - 0xe7007fff (0x1000) MX[B]E
> [9] -1 0xe7005000 - 0xe7005fff (0x1000) MX[B]E
> [10] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
> [11] -1 0xe5000000 - 0xe5003fff (0x4000) MX[B](B)
> [12] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
> [13] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [18] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
> [19] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [20] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
> [21] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
> [22] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
> [23] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> [24] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [25] 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) R128(0): PCI bus 1 card 5 func 0
> (==) R128(0): Depth 8, (==) framebuffer bpp 8
> (II) R128(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
> (==) R128(0): Default visual is PseudoColor
> (II) R128(0): Using 8 bits per RGB (8 bit DAC)
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) R128(0): initializing int10
> (==) R128(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) R128(0): Write-combining range (0xf0000,0x10000)
> (II) R128(0): Primary V_BIOS segment is: 0xc000
> (--) R128(0): Chipset: "ATI Rage 128 RF (AGP)" (ChipID = 0x5246)
> (--) R128(0): Linear framebuffer at 0xe0000000
> (--) R128(0): MMIO registers at 0xe5000000
> (==) R128(0): Write-combining range (0xe5000000,0x80000) was already clear
> (--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
> (WW) R128(0): Can't determine panel dimensions, and none specified. Disabling programming of FP registers.
> (II) R128(0): PLL parameters: rf=2864 rd=63 min=12500 max=25000; xclk=9000
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) R128(0): VESA BIOS detected
> (II) R128(0): VESA VBE Version 2.0
> (II) R128(0): VESA VBE Total Mem: 16384 kB
> (II) R128(0): VESA VBE OEM: ATI RAGE128
> (II) R128(0): VESA VBE OEM Software Rev: 1.0
> (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
> (II) R128(0): VESA VBE OEM Product: R128
> (II) R128(0): VESA VBE OEM Product Rev: 01.00
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) R128(0): VESA VBE DDC supported
> (II) R128(0): VESA VBE DDC Level 2
> (II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
> (II) R128(0): VESA VBE DDC read successfully
> (II) R128(0): Manufacturer: DEL Model: 73bd Serial#: 1211118643
> (II) R128(0): Year: 2000 Week: 19
> (II) R128(0): EDID Version: 1.2
> (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) R128(0): Sync: Separate
> (II) R128(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
> (II) R128(0): Gamma: 2.85
> (II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) R128(0): First detailed timing is preferred mode
> (II) R128(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.600
> (II) R128(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.297
> (II) R128(0): Supported VESA Video Modes:
> (II) R128(0): 720x400@70Hz
> (II) R128(0): 640x480@60Hz
> (II) R128(0): 640x480@75Hz
> (II) R128(0): 800x600@75Hz
> (II) R128(0): 1024x768@75Hz
> (II) R128(0): 1280x1024@75Hz
> (II) R128(0): Manufacturer's mask: 0
> (II) R128(0): Supported Future Video Modes:
> (II) R128(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
> (II) R128(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) R128(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
> (II) R128(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
> (II) R128(0): Supported additional Video Mode:
> (II) R128(0): clock: 94.5 MHz Image Size: 300 x 225 mm
> (II) R128(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
> (II) R128(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
> (II) R128(0): Serial No: 957VU05CH043
> (II) R128(0): Monitor name: DELL M781p
> (II) R128(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 85 kHz, PixClock max 160 MHz
> (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) R128(0): Monitor0: Using hsync range of 30.00-85.00 kHz
> (II) R128(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
> (II) R128(0): Clock range: 12.50 to 250.00 MHz
> (II) R128(0): Not using default mode "1280x960" (hsync out of range)
> (II) R128(0): Not using default mode "640x480" (hsync out of range)
> (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
> (II) R128(0): Not using default mode "640x512" (hsync out of range)
> (WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 160MHz
> (WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 160MHz
> (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
> (II) R128(0): Not using default mode "800x600" (hsync out of range)
> (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
> (II) R128(0): Not using default mode "800x600" (hsync out of range)
> (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
> (II) R128(0): Not using default mode "800x600" (hsync out of range)
> (WW) (1792x1344,Monitor0) mode clock 204.8MHz exceeds DDC maximum 160MHz
> (II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
> (II) R128(0): Not using default mode "896x672" (hsync out of range)
> (II) R128(0): Not using default mode "1856x1392" (hsync out of range)
> (II) R128(0): Not using default mode "928x696" (hsync out of range)
> (II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
> (II) R128(0): Not using default mode "928x696" (hsync out of range)
> (II) R128(0): Not using default mode "1920x1440" (hsync out of range)
> (II) R128(0): Not using default mode "960x720" (hsync out of range)
> (II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
> (II) R128(0): Not using default mode "960x720" (hsync out of range)
> (--) R128(0): Virtual size is 1792x1344 (pitch 1792)
> (**) R128(0): Default mode "1792x1344": 204.8 MHz, 83.7 kHz, 60.0 Hz
> (II) R128(0): Modeline "1792x1344" 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
> (**) R128(0): Default mode "1600x1200": 175.5 MHz, 81.2 kHz, 65.0 Hz
> (II) R128(0): Modeline "1600x1200" 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
> (**) R128(0): Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
> (II) R128(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
> (**) R128(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
> (II) R128(0): Modeline "1400x1050" 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync
> (**) R128(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
> (II) R128(0): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
> (**) R128(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
> (II) R128(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
> (**) R128(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
> (II) R128(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
> (**) R128(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
> (II) R128(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
> (**) R128(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
> (II) R128(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
> (**) R128(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) R128(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
> (**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) R128(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (**) R128(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
> (II) R128(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (**) R128(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) R128(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (**) R128(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
> (II) R128(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
> (**) R128(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
> (II) R128(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync
> (**) R128(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
> (II) R128(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
> (**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) R128(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
> (**) R128(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) R128(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
> (**) R128(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
> (II) R128(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
> (**) R128(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
> (II) R128(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
> (**) R128(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) R128(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
> (**) R128(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
> (II) R128(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
> (**) R128(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) R128(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
> (**) R128(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
> (II) R128(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
> (**) R128(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
> (II) R128(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
> (**) R128(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
> (II) R128(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
> (**) R128(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
> (II) R128(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
> (**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) R128(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
> (**) R128(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) R128(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
> (**) R128(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
> (II) R128(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
> (**) R128(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) R128(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
> (**) R128(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
> (II) R128(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
> (**) R128(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
> (II) R128(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
> (**) R128(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) R128(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
> (**) R128(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
> (II) R128(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
> (**) R128(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) R128(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
> (**) R128(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
> (II) R128(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
> (**) R128(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
> (II) R128(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
> (**) R128(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
> (II) R128(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
> (**) R128(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
> (II) R128(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
> (**) R128(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
> (II) R128(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
> (**) R128(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
> (II) R128(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
> (**) R128(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
> (II) R128(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
> (**) R128(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
> (II) R128(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
> (**) R128(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
> (II) R128(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
> (**) R128(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
> (II) R128(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
> (**) R128(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
> (II) R128(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
> (**) R128(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
> (II) R128(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
> (**) R128(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
> (II) R128(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
> (**) R128(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
> (II) R128(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
> (**) R128(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
> (II) R128(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
> (**) R128(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
> (II) R128(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
> (**) R128(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
> (II) R128(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
> (**) R128(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
> (II) R128(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
> (--) R128(0): Display dimensions: (300, 230) mm
> (--) R128(0): DPI set to (151, 148)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (!!) R128(0): For information on using the multimedia capabilities
> of this adapter, please see http://gatos.sf.net.
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0xe5000000 - 0xe5003fff (0x4000) MS[B]
> [1] 0 0xe0000000 - 0xe3ffffff (0x4000000) MS[B]
> [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [7] -1 0xe7000000 - 0xe7003fff (0x4000) MX[B]E
> [8] -1 0xe7006000 - 0xe7006fff (0x1000) MX[B]E
> [9] -1 0xe7004000 - 0xe7004fff (0x1000) MX[B]E
> [10] -1 0xe7007000 - 0xe7007fff (0x1000) MX[B]E
> [11] -1 0xe7005000 - 0xe7005fff (0x1000) MX[B]E
> [12] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]E
> [13] -1 0xe5000000 - 0xe5003fff (0x4000) MX[B](B)
> [14] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
> [15] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [16] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [17] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [18] 0 0x0000d000 - 0x0000d0ff (0x100) IS[B]
> [19] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [20] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [21] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]E
> [22] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [23] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]E
> [24] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
> [25] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
> [26] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> [27] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [28] 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (==) R128(0): Write-combining range (0xe5000000,0x80000) was already clear
> (==) R128(0): Write-combining range (0xe0000000,0x1000000)
> (==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
> (EE) R128(0): [dri] R128DRIScreenInit failed (depth 8 not supported). [dri] Disabling DRI.
> (II) R128(0): Memory manager initialized to (0,0) (1792,8191)
> (II) R128(0): Reserved area from (0,1344) to (1792,1346)
> (II) R128(0): Largest offscreen area available: 1792 x 6845
> (==) R128(0): Backing store disabled
> (==) R128(0): Silken mouse enabled
> (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Lines
> Dashed Lines
> Scanline Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 32 128x128 slots
> 32 256x256 slots
> 16 512x512 slots
> (II) R128(0): Acceleration enabled
> (II) R128(0): Using hardware cursor (scanline 1346)
> (II) R128(0): Largest offscreen area available: 1792 x 6844
> (**) Option "dpms"
> (**) R128(0): DPMS enabled
> (II) R128(0): Direct rendering disabled
> (II) Setting vga for screen 0.
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (**) Option "Protocol" "auto"
> (**) Mouse0: Protocol: "auto"
> (**) Option "CorePointer"
> (**) Mouse0: Core Pointer
> (**) Option "Device" "/dev/mouse"
> (EE) xf86OpenSerial: Cannot open device /dev/mouse
> Device busy.
> (WW) Mouse0: cannot open input device
> (==) Mouse0: Buttons: 3
> (II) Keyboard "Keyboard0" handled by legacy driver
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> (EE) xf86OpenSerial: Cannot open device /dev/mouse
> Device busy.
> (WW) Mouse0: cannot open input device
> (==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
> (==) R128(0): Write-combining range (0xe5000000,0x80000) was already clear
> (==) R128(0): Write-combining range (0xe0000000,0x1000000) was already set
> (==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
> (EE) R128(0): [dri] R128DRIScreenInit failed (depth 8 not supported). [dri] Disabling DRI.
> (II) R128(0): Memory manager initialized to (0,0) (1792,8191)
> (II) R128(0): Reserved area from (0,1344) to (1792,1346)
> (II) R128(0): Largest offscreen area available: 1792 x 6845
> (II) R128(0): Acceleration enabled
> (II) R128(0): Using hardware cursor (scanline 1346)
> (II) R128(0): Largest offscreen area available: 1792 x 6844
> (**) R128(0): DPMS enabled
> (II) R128(0): Direct rendering disabled
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> (EE) xf86OpenSerial: Cannot open device /dev/mouse
> Device busy.
> (WW) Mouse0: cannot open input device
> (==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
> (EE) xf86OpenSerial: Cannot open device /dev/mouse
> Device busy.
> (WW) Mouse0: cannot open input device
> (==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020403191200.A70232>