Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Mar 2009 13:48:22 -0300 (BRT)
From:      "Nenhum_de_Nos" <matheus@eternamente.info>
To:        "Hans Petter Selasky" <hselasky@c2i.net>
Cc:        freebsd-current@freebsd.org
Subject:   Re: problem on usb boot from mini itx
Message-ID:  <4ce4c26af03344ebfde74fef9c71fdd1.squirrel@cygnus.homeunix.com>
In-Reply-To: <200903030854.43068.hselasky@c2i.net>
References:  <f8161e633a32c1fcde0661afb816cbcb.squirrel@cygnus.homeunix.com> <044a92c96375670511fc437d6b924923.squirrel@cygnus.homeunix.com> <c2372709399b95e07c193ab436ec195f.squirrel@cygnus.homeunix.com> <200903030854.43068.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help

On Tue, March 3, 2009 04:54, Hans Petter Selasky wrote:
> On Monday 02 March 2009, Nenhum_de_Nos wrote:
>>
>> I got one, not a bit of change :(
>>
>
> Is the USB HUB detected?

as far as I can tell, not at all. It complaints about not finding the kernel.

>> still any hopes ?
>
> If no USB device is detected at all, then there is a problem. I know VIA

my hopes of this working are based int the fact that I can do this on
OpenBSD. So I think is doable (ok, I'm no specialist in this, you are. If
you say can't, I will believe).

and more info, if I use the 44 pin ide interface to boot, when fbsd is on
I can use the usb ports ok. hope this info helps.

> have
> known problems with the USB hardware, but I cannot tell if your model is
> affected. You could try editing the code /sys/dev/usb/usb_device.c and
> change
> it so that it will try the set_address command two times before giving up.

when the loader in fbsd is called, it will run this code ?
I will test this when I get home at night. thanks. If you have more ideas,
please broadcast :)

just as more info, I tried first to use pfSense from usb stick and never
it worked :( It nevet got to boot.

thanks again,

matheus


> --HPS
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>


-- 
We will call you cygnus,
The God of balance you shall be




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4ce4c26af03344ebfde74fef9c71fdd1.squirrel>