Date: Thu, 24 Oct 2013 11:03:35 +0200 From: Milan Obuch <freebsd-multimedia@dino.sk> To: freebsd-multimedia@freebsd.org Subject: Asus E35M1-I on board audio does not work... Message-ID: <20131024110335.5abbb5c0@zeta.dino.sk>
next in thread | raw e-mail | index | archive | help
Hi, I have E35M1-I board and would like get working on board audio. There are both analog and digital audio ports, according sysctl dev.pcm there are dev.pcm.0.%desc: ATI R6xx (HDMI) dev.pcm.0.%driver: pcm dev.pcm.0.%location: nid=3 dev.pcm.0.%parent: hdaa0 dev.pcm.0.play.vchans: 1 dev.pcm.0.play.vchanmode: passthrough dev.pcm.0.play.vchanrate: 48000 dev.pcm.0.play.vchanformat: s16le:2.0 dev.pcm.0.play.32bit: 0 dev.pcm.0.buffersize: 65536 dev.pcm.0.bitperfect: 0 dev.pcm.1.%desc: Realtek ALC892 (Rear Analog) dev.pcm.1.%driver: pcm dev.pcm.1.%location: nid=20,24,26 dev.pcm.1.%parent: hdaa1 dev.pcm.1.play.vchans: 1 dev.pcm.1.play.vchanmode: fixed dev.pcm.1.play.vchanrate: 48000 dev.pcm.1.play.vchanformat: s16le:2.0 dev.pcm.1.play.32bit: 24 dev.pcm.1.rec.vchans: 1 dev.pcm.1.rec.vchanmode: fixed dev.pcm.1.rec.vchanrate: 48000 dev.pcm.1.rec.vchanformat: s16le:2.0 dev.pcm.1.rec.32bit: 24 dev.pcm.1.rec.autosrc: 2 dev.pcm.1.buffersize: 65536 dev.pcm.1.bitperfect: 0 dev.pcm.2.%desc: Realtek ALC892 (Front Analog) dev.pcm.2.%driver: pcm dev.pcm.2.%location: nid=27,25 dev.pcm.2.%parent: hdaa1 dev.pcm.2.play.vchans: 1 dev.pcm.2.play.vchanmode: fixed dev.pcm.2.play.vchanrate: 48000 dev.pcm.2.play.vchanformat: s16le:2.0 dev.pcm.2.play.32bit: 24 dev.pcm.2.rec.vchans: 1 dev.pcm.2.rec.vchanmode: fixed dev.pcm.2.rec.vchanrate: 48000 dev.pcm.2.rec.vchanformat: s16le:2.0 dev.pcm.2.rec.32bit: 24 dev.pcm.2.rec.autosrc: 2 dev.pcm.2.buffersize: 65536 dev.pcm.2.bitperfect: 0 dev.pcm.3.%desc: Realtek ALC892 (Rear Digital) dev.pcm.3.%driver: pcm dev.pcm.3.%location: nid=30 dev.pcm.3.%parent: hdaa1 dev.pcm.3.play.vchans: 1 dev.pcm.3.play.vchanmode: passthrough dev.pcm.3.play.vchanrate: 48000 dev.pcm.3.play.vchanformat: s16le:2.0 dev.pcm.3.play.32bit: 24 dev.pcm.3.buffersize: 65536 dev.pcm.3.bitperfect: 0 dev.pcm.4.%desc: Realtek ALC892 (Onboard Digital) dev.pcm.4.%driver: pcm dev.pcm.4.%location: nid=17 dev.pcm.4.%parent: hdaa1 dev.pcm.4.play.vchans: 1 dev.pcm.4.play.vchanmode: passthrough dev.pcm.4.play.vchanrate: 48000 dev.pcm.4.play.vchanformat: s16le:2.0 dev.pcm.4.play.32bit: 24 dev.pcm.4.buffersize: 65536 dev.pcm.4.bitperfect: 0 and 'sysctl hw.snd' tells hw.snd.feeder_rate_presets: 100:8:0.85 100:36:0.92 100:164:0.97 hw.snd.feeder_rate_polyphase_max: 183040 hw.snd.feeder_rate_min: 1 hw.snd.feeder_rate_max: 2016000 hw.snd.feeder_rate_round: 25 hw.snd.feeder_rate_quality: 1 hw.snd.feeder_eq_presets: PEQ:16000,0.2500,62,0.2500:-9,9,1.0:44100,48000,88200,96000,176400,192000 hw.snd.feeder_eq_exact_rate: 0 hw.snd.report_soft_formats: 1 hw.snd.report_soft_matrix: 1 hw.snd.latency: 5 hw.snd.latency_profile: 1 hw.snd.vpc_autoreset: 1 hw.snd.vpc_0db: 45 hw.snd.vpc_reset: 0 hw.snd.compat_linux_mmap: 0 hw.snd.vpc_mixer_bypass: 1 hw.snd.verbose: 0 hw.snd.default_auto: 0 hw.snd.version: 2009061500/i386 hw.snd.default_unit: 0 hw.snd.maxautovchans: 16 Running 'mixer' gets Mixer vol is currently set to 100:100 Mixer pcm is currently set to 100:100 When I try any analog audio port, there are three jacks, there is no signal at all (blue and red, which should be probably input) or some noise only (green). This was tested with hw.snd.default_unit set to any of 0, 1, 2, 3, 4. Also, relevant lines in dmesg: hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx Group> (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC892 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 On next reboot I will try verbose boot, so possibly full picture could be drawn, but in between, has anybody any hint what I could try? Anything else I should post? There is HDMI output as well, but no sound here, too, with hw.snd.default_unit set to 0. Regards, Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131024110335.5abbb5c0>