Date: Mon, 18 Nov 2002 00:34:19 +0100 From: hymette@wanadoo.fr To: ticso@cicely.de Cc: freebsd-hardware <freebsd-hardware@FreeBSD.ORG>, freebsd-questions <freebsd-questions@FreeBSD.ORG> Subject: Re: Epson Stylus Color installation problem Message-ID: <3DD8277B.7020704@wanadoo.fr> References: <bulk.31001.20021113005629@hub.freebsd.org> <p05111700b9f8149ab5ec@[192.168.1.100]> <20021115060725.GD69109@freebsd.tekrealm.net> <3DD6B062.1000302@wanadoo.fr> <20021116205256.GA24260@tp.databus.com> <3DD6C6D9.5060102@wanadoo.fr> <3DD7D3E2.6050003@wanadoo.fr> <20021117230427.GF3298@cicely8.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
First let me tell you that I they gave me the solution, so now my driver prints: I had installed ghostscript as a pkg when the ghostscript driver (stp stcolor) required by apsfilter was only available through compilation from the port. I had no luck with cups, not even the web interface wanted to open, nor the commands to answer . I suppose I'll have to study how this application works some day (the ghostscript Makefile warns: stp is outdated). yes I'm using ulpt0 - sorry if I don't catch the difference between I/O services! no, before installing the driver it was not possible to print anything! Anyway many thanks for your concern. Bernd Walter wrote: >On Sun, Nov 17, 2002 at 06:37:38PM +0100, hymette@wanadoo.fr wrote: > > >>I did not see any recommendation in the Handbook to set up >>communication mode with usb printers. When I run lptcontrol ... the >>answer is "ioctl : Operation not supported by the device". Is it normal >>? Is there anything to change in the kernel to set the mode to polled or >>interrupt ? >> >> > >You are connecting to usb! >lptcontrol is for - well for the lpt device - lpt != ulpt. >Does dmesg show succesfull probing of ulpt0? >Do you have usbd_enable="YES" in /etc/rc.conf? >Are you using /dev/ulpt0 and -not- /dev/lpt0? >Can you print with echo test > /dev/ulpt0? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DD8277B.7020704>