Date: Fri, 11 Jan 2008 09:29:57 -0700 From: Elliot Finley <lists@efinley.com> To: freebsd-current@freebsd.org Subject: 7.0 RC1 dump hangs - sometimes Message-ID: <b96fo39r6js1vdu6g103ngdveii822gn24@4ax.com>
next in thread | raw e-mail | index | archive | help
<sent earlier from wrong address, this may show up as duplicate>
I'm running RELENG_7_0 as of Jan 9th (on a Dell PE 2950). When I do:
dump -3auf - /usr >
/host/backup.etv.net/back/zabbix.etv.net._usr.2008-01-11.level-3
sometimes it finishes and sometimes it hangs part way through. I've
been backing my 4.x, 5.x and 6.x systems up this way for years without
ever having an issue.
This box isn't in production yet so I can do whatever testing is
needed. I can also provide access to a developer if needed.
Looking at the bottom of the dmesg (below) I see:
nfs send error 35 for server backup:/back=20
Any help with this issue would be greatly appreciated.
Thanks,
Elliot
zabbix root:~#>uname -a=20
=46reeBSD zabbix.etv.net 7.0-RC1 FreeBSD 7.0-RC1 #0: Wed Jan 9 14:45:13
MST 2008 root@zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC amd64=20
=20
zabbix root:~#>dmesg=20
Copyright (c) 1992-2008 The FreeBSD Project.=20
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994=20
The Regents of the University of California. All rights
reserved.=20
=46reeBSD is a registered trademark of The FreeBSD Foundation.=20
=46reeBSD 7.0-RC1 #0: Wed Jan 9 14:45:13 MST 2008=20
root@zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC=20
Timecounter "i8254" frequency 1193182 Hz quality 0=20
CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1597.53-MHz
K8-class CPU)=20
Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6=20
=46eatures=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
=46eatures2=3D0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,=
DCA>
AMD Features=3D0x20100800<SYSCALL,NX,LM>=20
AMD Features2=3D0x1<LAHF>=20
Cores per package: 2=20
usable memory =3D 4281675776 (4083 MB)=20
avail memory =3D 4120317952 (3929 MB)=20
ACPI APIC Table: <DELL PE_SC3 >=20
=46reeBSD/SMP: Multiprocessor System Detected: 4 CPUs=20
cpu0 (BSP): APIC ID: 0=20
cpu1 (AP): APIC ID: 1=20
cpu2 (AP): APIC ID: 6=20
cpu3 (AP): APIC ID: 7=20
ioapic0: Changing APIC ID to 8=20
ioapic1: Changing APIC ID to 9=20
ioapic0 <Version 2.0> irqs 0-23 on motherboard=20
ioapic1 <Version 2.0> irqs 64-87 on motherboard=20
kbd1 at kbdmux0=20
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)=20
hptrr: HPT RocketRAID controller driver v1.1 (Jan 9 2008 14:45:01)=20
acpi0: <DELL PE_SC3> on motherboard=20
acpi0: [ITHREAD]=20
acpi0: Power Button (fixed)=20
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=20
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0=20
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0=20
Timecounter "HPET" frequency 14318180 Hz quality 900=20
cpu0: <ACPI CPU> on acpi0=20
p4tcc0: <CPU Frequency Thermal Control> on cpu0=20
cpu1: <ACPI CPU> on acpi0=20
p4tcc1: <CPU Frequency Thermal Control> on cpu1=20
cpu2: <ACPI CPU> on acpi0=20
p4tcc2: <CPU Frequency Thermal Control> on cpu2=20
cpu3: <ACPI CPU> on acpi0=20
p4tcc3: <CPU Frequency Thermal Control> on cpu3=20
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=20
pci0: <ACPI PCI bus> on pcib0=20
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0=20
pci6: <ACPI PCI bus> on pcib1=20
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6=20
pci7: <ACPI PCI bus> on pcib2=20
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7=20
pci8: <ACPI PCI bus> on pcib3=20
pcib4: <PCI-PCI bridge> at device 0.0 on pci8=20
pci9: <PCI bus> on pcib4=20
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9=20
miibus0: <MII bus> on bce0=20
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0=20
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto=20
bce0: Ethernet address: 00:19:b9:b8:6a:df=20
bce0: [ITHREAD]=20
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )=20
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7=20
pci10: <ACPI PCI bus> on pcib5=20
pcib6: <PCI-PCI bridge> at device 0.3 on pci6=20
pci11: <PCI bus> on pcib6=20
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0=20
pci1: <ACPI PCI bus> on pcib7=20
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1=20
pci2: <ACPI PCI bus> on pcib8=20
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff
irq 78 at device 14.0 on pci2=20
mfi0: Megaraid SAS driver Ver 2.00=20
mfi0: 2978 (253222235s/0x0020/0) - Shutdown command received from host
mfi0: 2979 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028
0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 2980 (4278190080s/0x0020/0) - Type 18: Firmware version
1.03.10-0216=20
mfi0: 2981 (4278190099s/0x0008/0) - Battery Present=20
mfi0: 2982 (4278190099s/0x0020/0) - Type 18: Package version
5.1.1-0040=20
mfi0: 2983 (4278190127s/0x0004/0) - PD 08(e1/s255) event: Enclosure
(SES) discovered on PD 08(e1/s255)=20
mfi0: 2984 (4278190127s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD
08(e1/s255)=20
mfi0: 2985 (4278190127s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255)
Info: enclPd=3D08, scsiType=3Dd, portMap=3D00,
sasAddr=3D50019090c0d7da00,0000000000000000=20
mfi0: 2986 (4278190127s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD
00(e1/s0)=20
mfi0: 2987 (4278190127s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0)
Info: enclPd=3D08, scsiType=3D0, portMap=3D01,
sasAddr=3D5000c50003928fd5,0000000000000000=20
mfi0: 2988 (4278190127s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD
01(e1/s1)=20
mfi0: 2989 (4278190127s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1)
Info: enclPd=3D08, scsiType=3D0, portMap=3D02,
sasAddr=3D5000c50003929765,0000000000000000=20
mfi0: 2990 (4278190127s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD
02(e1/s2)=20
mfi0: 2991 (4278190127s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2)
Info: enclPd=3D08, scsiType=3D0, portMap=3D04,
sasAddr=3D5000c50003922b81,0000000000000000=20
mfi0: 2992 (4278190127s/0x0002/0) - PD 03(e1/s3) event: Inserted: PD
03(e1/s3)=20
mfi0: 2993 (4278190127s/0x0002/0) - Type 29: Inserted: PD 03(e1/s3)
Info: enclPd=3D08, scsiType=3D0, portMap=3D08,
sasAddr=3D5000c500039296d5,0000000000000000=20
mfi0: 2994 (4278190127s/0x0002/0) - PD 04(e1/s4) event: Inserted: PD
04(e1/s4)=20
mfi0: 2995 (4278190127s/0x0002/0) - Type 29: Inserted: PD 04(e1/s4)
Info: enclPd=3D08, scsiType=3D0, portMap=3D10,
sasAddr=3D5000c50003929e95,0000000000000000=20
mfi0: 2996 (4278190127s/0x0002/0) - PD 05(e1/s5) event: Inserted: PD
05(e1/s5)=20
mfi0: 2997 (4278190127s/0x0002/0) - Type 29: Inserted: PD 05(e1/s5)
Info: enclPd=3D08, scsiType=3D0, portMap=3D20,
sasAddr=3D5000c50003929d81,0000000000000000=20
mfi0: 2998 (4278190127s/0x0042/0) - Type 22: Dedicated Hot Spare
created on PD 05(e1/s5) (ded,rev,ac=3D1)=20
mfi0: 2999 (253222599s/0x0020/0) - Adapter ticks 253222599 elapsed
48s: Time established as 01/09/08 19:36:39; (48 seconds since power
on)=20
mfi0: [ITHREAD]=20
pcib9: <PCI-PCI bridge> at device 0.2 on pci1=20
pci3: <PCI bus> on pcib9=20
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0=20
pci12: <ACPI PCI bus> on pcib10=20
pcib11: <PCI-PCI bridge> at device 5.0 on pci0=20
pci13: <PCI bus> on pcib11=20
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0=20
pci14: <ACPI PCI bus> on pcib12=20
pcib13: <PCI-PCI bridge> at device 7.0 on pci0=20
pci15: <PCI bus> on pcib13=20
pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0=20
pci4: <ACPI PCI bus> on pcib14=20
pcib15: <PCI-PCI bridge> at device 0.0 on pci4=20
pci5: <PCI bus> on pcib15=20
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5=20
miibus1: <MII bus> on bce1=20
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1=20
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto=20
bce1: Ethernet address: 00:19:b9:b8:6a:dd=20
bce1: [ITHREAD]=20
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )=20
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xdce0-0xdcff irq 21 at device 29.0 on pci0=20
uhci0: [GIANT-LOCKED]=20
uhci0: [ITHREAD]=20
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0=20
usb0: USB revision 1.0=20
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered=20
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xdcc0-0xdcdf irq 20 at device 29.1 on pci0=20
uhci1: [GIANT-LOCKED]=20
uhci1: [ITHREAD]=20
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1=20
usb1: USB revision 1.0=20
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered=20
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0xdca0-0xdcbf irq 21 at device 29.2 on pci0=20
uhci2: [GIANT-LOCKED]=20
uhci2: [ITHREAD]=20
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2=20
usb2: USB revision 1.0=20
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered=20
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600400-0xfc6007ff
irq 21 at device 29.7 on pci0=20
ehci0: [GIANT-LOCKED]=20
ehci0: [ITHREAD]=20
usb3: EHCI version 1.0=20
usb3: companion controllers, 2 ports each: usb0 usb1 usb2=20
usb3: <Intel 63XXESB USB 2.0 controller> on ehci0=20
usb3: USB revision 2.0=20
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered=20
uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr
2> on uhub3=20
uhub4: multiple transaction translators=20
uhub4: 2 ports with 2 removable, self powered=20
ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4=20
kbd2 at ukbd0=20
ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4=20
ums0: X report 0x0002 not supported=20
device_attach: ums0 attach returned 6=20
umass0: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4=20
umass1: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4=20
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr
5> on uhub3=20
uhub5: multiple transaction translators=20
uhub5: 4 ports with 4 removable, self powered=20
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0=20
pci16: <ACPI PCI bus> on pcib16=20
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xd0000000-0xd7ffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on
pci16=20
isab0: <PCI-ISA bridge> at device 31.0 on pci0=20
isa0: <ISA bus> on isab0=20
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0=20
ata0: <ATA channel 0> on atapci0=20
ata0: [ITHREAD]=20
ata1: <ATA channel 1> on atapci0=20
ata1: [ITHREAD]=20
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0=20
fdc0: does not respond=20
device_attach: fdc0 attach returned 6=20
sio0: configured irq 4 not in bitmap of probed irqs 0=20
sio0: port may not be enabled=20
sio0: configured irq 4 not in bitmap of probed irqs 0=20
sio0: port may not be enabled=20
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0=20
sio0: type 16550A=20
sio0: [FILTER]=20
sio1: configured irq 3 not in bitmap of probed irqs 0=20
sio1: port may not be enabled=20
sio1: configured irq 3 not in bitmap of probed irqs 0=20
sio1: port may not be enabled=20
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0=20
sio1: type 16550A=20
sio1: [FILTER]=20
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0=20
fdc0: does not respond=20
device_attach: fdc0 attach returned 6=20
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0=20
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=20
atkbd0: <AT Keyboard> irq 1 on atkbdc0=20
kbd0 at atkbd0=20
atkbd0: [GIANT-LOCKED]=20
atkbd0: [ITHREAD]=20
ppc0: cannot reserve I/O port range=20
sc0: <System console> at flags 0x100 on isa0=20
sc0: VGA <16 virtual consoles, flags=3D0x300>=20
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0=20
ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1=20
kbd3 at ukbd1=20
ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1=20
ums0: 5 buttons and Z dir.=20
Timecounters tick every 1.000 msec=20
hptrr: no controller detected.=20
acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> at ata0-master UDMA33=20
mfi0: 3000 (253222655s/0x0008/0) - Battery temperature is normal=20
mfi0: 3001 (253222655s/0x0008/0) - Current capacity of the battery is
above threshold=20
mfid0: <MFI Logical Disk> on mfi0=20
mfid0: 557568MB (1141899264 sectors) RAID volume 'AR0' is optimal=20
SMP: AP CPU #1 Launched!=20
SMP: AP CPU #2 Launched!=20
SMP: AP CPU #3 Launched!=20
da0 at umass-sim1 bus 1 target 0 lun 0=20
da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device=20
da0: 40.000MB/s transfers=20
da0: Attempt to query device size failed: NOT READY, Medium not
present=20
cd0 at umass-sim0 bus 0 target 0 lun 0=20
cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device=20
cd0: 40.000MB/s transfers=20
cd0: Attempt to query device size failed: NOT READY, Medium not
present=20
Trying to mount root from ufs:/dev/mfid0s1a=20
bce0: link state changed to UP=20
logo_saver: the console does not support M_VGA_CG320=20
module_register_init: MOD_LOAD (logo_saver, 0xffffffffb49ee010, 0)
error 19=20
pid 49887 (try), uid 0: exited on signal 10 (core dumped)=20
mfi0: 3002 (253333350s/0x0008/0) - Battery started charging=20
mfi0: 3003 (253335170s/0x0008/0) - Battery charge complete=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
nfs send error 35 for server backup:/back=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b96fo39r6js1vdu6g103ngdveii822gn24>