Date: Wed, 16 Oct 2019 17:45:02 +0200 From: Mathias Picker <Mathias.Picker@virtual-earth.de> To: Michael Sierchio <kudzu@tenebras.com> Cc: Mathias Picker <Mathias.Picker@virtual-earth.de>, freebsd-questions <freebsd-questions@freebsd.org> Subject: [SOLVED] Re: MicroSD-Reader on Yoga X1 3rd gen does not work Message-ID: <86o8yg1ypt.fsf@virtual-earth.de> In-Reply-To: <CAHu1Y70mZE0CVQg3zEayccqnw=0P92z0s_4y1zjtKcAJ0h98dA@mail.gmail.com> References: <861rvdj43x.fsf@virtual-earth.de> <CAHu1Y72i8hN2LefNbXBogkTeQVkRRPZ=7c18%2B1g0U1mgvVgKVQ@mail.gmail.com> <86ftjtzvza.fsf@virtual-earth.de> <CAHu1Y70mZE0CVQg3zEayccqnw=0P92z0s_4y1zjtKcAJ0h98dA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Michael Sierchio writes: > Try increasing the value of > > kern.cam.scsi_delay > > > in /boot/loader.conf. e.g., > > > kern.cam.scsi_delay=3D"7500" > Thanks, that solved it!! I still get umass0 on uhub0 umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 umass0: SCSI over Bulk-Only; quirks =3D 0x4000 umass0:0:0: Attached to scbus0 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00=20 00 00 10 00 00=20 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0=20 (Invalid field in CDB) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error but I can mount /dev/da0s1 Thanks a lot! Mathias > > > On Tue, Oct 15, 2019 at 11:47 AM Mathias Picker < > Mathias.Picker@virtual-earth.de> wrote: > >> >> Michael Sierchio writes: >> >> > On Tue, Oct 15, 2019 at 10:44 AM Mathias Picker >> > <Mathias.Picker@virtual-earth.de> wrote: >> > >> > Hi all, >> > >> > I=E2=80=99m trying the MicroSD-Reader on my X1 Yoga for the first=20 >> > time, >> > and get: >> > >> > Oct 15 19:31:35 Danton kernel: (da0:umass-sim0:0:0:0): >> > READ(10). CDB: 28 00 0e e2 af c1 00 00 04 00 >> > Oct 15 19:31:35 Danton kernel: (da0:umass-sim0:0:0:0): CAM >> > status: >> > CCB request completed with an error >> > Oct 15 19:31:35 Danton kernel: (da0:umass-sim0:0:0:0):=20 >> > Retrying >> > command, 1 more tries remain >> > >> > Hey, Matthias =E2=80=93 >> > >> > What is your kernel config? And/or are you loading the >> > appropriate kernel module? And show the contents of >> > /var/run/dmesg.boot >> > >> > I have: >> > >> > device mmc # MMC/SD bus >> > >> > device mmcsd # MMC/SD memory card >> > >> > device sdhci # Generic PCI SD Host >> > Controller >> > >> > And >> > >> > sdhci_pci0: <Generic SD HCI> mem 0xf7f27000-0xf7f270ff at=20 >> > device >> > 20.7 on pci0 >> > >> > sdhci_pci0: 1 slot(s) allocated >> > >> > Without that, I get the probe on the CAM bus, but the device >> > isn't recognized. >> > >> > If everything checks out with the above, it may be work=20 >> > looking >> > at the kern.cam boot time sysctl vars >> > >> > Hope that helps. >> > >> > =E2=80=93 M >> Hi Michael, >> >> >> I=E2=80=99m running GENERIC, so mmc, mmcsd and sdhci are included. >> I do not get the sdhci_pci, but >> >> ugen0.6: <Generic USB3.0-CRW> at usbus0 >> umass0 on uhub0 >> umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 >> umass0: SCSI over Bulk-Only; quirks =3D 0x4000 >> umass0:0:0: Attached to scbus0 >> (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00=20 >> 00 >> 00 00 10 00 00 >> (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error >> (probe0:umass-sim0:0:0:0): SCSI status: Check Condition >> (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 >> (Invalid field in CDB) >> (probe0:umass-sim0:0:0:0): Error 22, Unretryable error >> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 >> da0: <Generic- SD/MMC CRW 1.00> Removable Direct Access SPC-4=20 >> SCSI >> device >> da0: Serial Number 28203008282014000 >> da0: 400.000MB/s transfers >> da0: 121942MB (249737216 512 byte sectors) >> da0: quirks=3D0x2<NO_6_BYTE> >> >> Thanks for your help, kern.cam output and dmesg.boot follow=20 >> below, >> >> Mathias >> >> kern.cam shows >> >> % sysctl kern.cam >> kern.cam.enc.emulate_array_devices: 1 >> kern.cam.enc.verbose: 0 >> kern.cam.sa.allow_io_split: 0 >> kern.cam.da.0.sort_io_queue: -1 >> kern.cam.da.0.p_type: 0 >> kern.cam.da.0.rotating: 1 >> kern.cam.da.0.unmapped_io: 0 >> kern.cam.da.0.error_inject: 0 >> kern.cam.da.0.max_seq_zones: 0 >> kern.cam.da.0.optimal_nonseq_zones: 0 >> kern.cam.da.0.optimal_seq_zones: 0 >> kern.cam.da.0.zone_support: None >> kern.cam.da.0.zone_mode: Not Zoned >> kern.cam.da.0.minimum_cmd_size: 10 >> kern.cam.da.0.delete_max: 131072 >> kern.cam.da.0.delete_method: NONE >> kern.cam.da.default_softtimeout: 0 >> kern.cam.da.disable_wp_detection: 0 >> kern.cam.da.send_ordered: 1 >> kern.cam.da.default_timeout: 60 >> kern.cam.da.retry_count: 4 >> kern.cam.da.poll_period: 3 >> kern.cam.ada.write_cache: 1 >> kern.cam.ada.read_ahead: 1 >> kern.cam.ada.spindown_suspend: 1 >> kern.cam.ada.spindown_shutdown: 1 >> kern.cam.ada.send_ordered: 1 >> kern.cam.ada.default_timeout: 30 >> kern.cam.ada.retry_count: 4 >> kern.cam.cd.timeout: 30000 >> kern.cam.cd.retry_count: 4 >> kern.cam.cd.poll_period: 3 >> kern.cam.scsi_delay: 5000 >> kern.cam.cam_srch_hi: 0 >> kern.cam.nda.max_trim: 256 >> kern.cam.pmp.hide_special: 1 >> kern.cam.pmp.default_timeout: 30 >> kern.cam.pmp.retry_count: 1 >> kern.cam.debug_delay: 0 >> kern.cam.dflags: 0 >> kern.cam.num_doneqs: 2 >> kern.cam.announce_nosbuf: 0 >> kern.cam.xpt_generation: 5 >> kern.cam.boot_delay: 0 >> kern.cam.mapmem_thresh: 65536 >> kern.cam.sort_io_queues: 1 >> >> dmesg.boot: >> ---<<BOOT>>--- >> Copyright (c) 1992-2019 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, >> 1993, 1994 >> The Regents of the University of California. All rights >> reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 12.1-STABLE r353466 GENERIC amd64 >> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581)=20 >> (based >> on LLVM 8.0.1) >> VT(efifb): resolution 2560x1440 >> CPU: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (1992.09-MHz >> K8-class CPU) >> Origin=3D"GenuineIntel" Id=3D0x806ea Family=3D0x6 Model=3D0x8e >> Stepping=3D10 >> >> Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P= GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> Features2=3D0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE= 3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AES= NI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> >> AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> >> AMD Features2=3D0x121<LAHF,ABM,Prefetch> >> Structured Extended >> >> Features=3D0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCI= D,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> >> Structured Extended=20 >> Features3=3D0x9c000000<IBPB,STIBP,L1DFL,SSBD> >> XSAVE Features=3D0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> >> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> TSC: P-state invariant, performance statistics >> real memory =3D 17179869184 (16384 MB) >> avail memory =3D 16357519360 (15599 MB) >> Event timer "LAPIC" quality 600 >> ACPI APIC Table: <LENOVO TP-N25 > >> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs >> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads >> random: unblocking device. >> ioapic0 <Version 2.0> irqs 0-119 on motherboard >> Launching APs: 1 3 6 4 5 7 2 >> Timecounter "TSC" frequency 1992088229 Hz quality 1000 >> Cuse v0.1.36 @ /dev/cuse >> random: entropy device external interface >> 000.000020 [4335] netmap_init netmap: loaded=20 >> module >> [ath_hal] loaded >> module_register_init: MOD_LOAD (vesa, 0xffffffff8114d4d0, 0)=20 >> error >> 19 >> random: registering fast source Intel Secure Key RNG >> random: fast provider: "Intel Secure Key RNG" >> kbd1 at kbdmux0 >> nexus0 >> efirtc0: <EFI Realtime Clock> on motherboard >> efirtc0: registered as a time-of-day clock, resolution=20 >> 1.000000s >> cryptosoft0: <software crypto> on motherboard >> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on=20 >> motherboard >> acpi0: <LENOVO TP-N25> on motherboard >> acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66=20 >> on >> acpi0 >> acpi0: Power Button (fixed) >> unknown: memory range not supported >> cpu0: <ACPI CPU> on acpi0 >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff=20 >> on >> acpi0 >> Timecounter "HPET" frequency 24000000 Hz quality 950 >> Event timer "HPET" frequency 24000000 Hz quality 550 >> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 >> atrtc0: Warning: Couldn't map I/O. >> atrtc0: registered as a time-of-day clock, resolution 1.000000s >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b=20 >> on >> acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem >> 0x2fe0000000-0x2fe0ffffff,0x2fc0000000-0x2fdfffffff at device=20 >> 2.0 >> on pci0 >> acpi_video0: <ACPI video extension> on vgapci0 >> vgapci0: Boot video device >> pci0: <old, non-VGA display device> at device 19.0 (no driver >> attached) >> xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem >> 0x2fe1010000-0x2fe101ffff at device 20.0 on pci0 >> xhci0: 32 bytes context size, 64-bit DMA >> usbus0 on xhci0 >> usbus0: 5.0Gbps Super Speed USB v3.0 >> pci0: <simple comms> at device 22.0 (no driver attached) >> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> pci1: <network> at device 0.0 (no driver attached) >> pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 >> pci2: <ACPI PCI bus> on pcib2 >> pci2: <wireless controller> at device 0.0 (no driver attached) >> pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 >> pci3: <ACPI PCI bus> on pcib3 >> nvme0: <Generic NVMe Device> mem 0xec200000-0xec203fff at=20 >> device >> 0.0 on pci3 >> pcib4: <ACPI PCI-PCI bridge> at device 29.0 on pci0 >> pci4: <ACPI PCI bus> on pcib4 >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> pci0: <memory> at device 31.2 (no driver attached) >> hdac0: <Intel Kaby Lake-LP HDA Controller> mem >> 0x2fe1028000-0x2fe102bfff,0x2fe1000000-0x2fe100ffff at device=20 >> 31.3 >> on pci0 >> em0: <Intel(R) PRO/1000 Network Connection> mem >> 0xec500000-0xec51ffff at device 31.6 on pci0 >> em0: Using 1024 TX descriptors and 1024 RX descriptors >> em0: Using an MSI interrupt >> em0: Ethernet address: 48:2a:e3:1a:da:58 >> em0: netmap queues/slots: TX 1/1024, RX 1/1024 >> acpi_button0: <Sleep Button> on acpi0 >> acpi_lid0: <Control Method Lid Switch> on acpi0 >> acpi_tz0: <Thermal Zone> on acpi0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on >> acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> psm0: [GIANT-LOCKED] >> psm0: model Generic PS/2 mouse, device ID 0 >> acpi_acad0: <AC Adapter> on acpi0 >> battery0: <ACPI Control Method Battery> on acpi0 >> est0: <Enhanced SpeedStep Frequency Control> on cpu0 >> ZFS filesystem version: 5 >> ZFS storage pool version: features support (5000) >> Timecounters tick every 1.000 msec >> ugen0.1: <0x8086 XHCI root HUB> at usbus0 >> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>=20 >> on >> usbus0 >> nvd0: <SAMSUNG MZVLB1T0HALR-000L7> NVMe namespace >> nvd0: 976762MB (2000409264 512 byte sectors) >> GEOM_ELI: Device nvd0p4.eli created. >> hdacc0: GEOM_ELI: Encryption: AES-XTS 256 >> GEOM_ELI: Crypto: hardware >> <Realtek ALC285 HDA CODEC> at cad 0 on hdac0 >> hdaa0: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc0 >> pcm0: <Realtek ALC285 (Internal Analog)> at nid 20 and 18 on=20 >> hdaa0 >> pcm1: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa0 >> hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 >> hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on=20 >> hdacc1 >> pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 >> Trying to mount root from zfs:zroot/ROOT/default []... >> Root mount waiting for: usbus0 >> uhub0: 18 ports with 18 removable, self powered >> Root mount waiting for: usbus0 >> ugen0.2: <vendor 0x8087 product 0x0a2b> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.3: <SunplusIT Inc Integrated Camera> at usbus0 >> ugen0.4: <vendor 0x06cb product 0x009a> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> ugen0.6: <Generic USB3.0-CRW> at usbus0 >> umass0 on uhub0 >> umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 >> umass0: SCSI over Bulk-Only; quirks =3D 0x4000 >> umass0:0:0: Attached to scbus0 >> (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00=20 >> 00 >> 00 00 10 00 00 >> (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error >> (probe0:umass-sim0:0:0:0): SCSI status: Check Condition >> (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 >> (Invalid field in CDB) >> (probe0:umass-sim0:0:0:0): Error 22, Unretryable error >> GEOM_ELI: Device nvd0p3.eli created. >> GEOM_ELI: Encryption: AES-XTS 128 >> GEOM_ELI: Crypto: hardware >> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 >> da0: <Generic- SD/MMC CRW 1.00> Removable Direct Access SPC-4=20 >> SCSI >> device >> da0: Serial Number 28203008282014000 >> da0: 400.000MB/s transfers >> da0: 121942MB (249737216 512 byte sectors) >> da0: quirks=3D0x2<NO_6_BYTE> >> drmn0: <drmn> on vgapci0 >> vgapci0: child drmn0 requested pci_enable_io >> vgapci0: child drmn0 requested pci_enable_io >> [drm] Unable to create a private tmpfs mount, hugepage support >> will be disabled(-19). >> Failed to add WC MTRR for [0x2fc0000000-0x2fdfffffff]: -22; >> performance may suffer >> [drm] Got stolen memory base 0xaa800000, size 0x2000000 >> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >> [drm] Driver supports precise vblank timestamp query. >> [drm] Connector eDP-1: get mode from tunables: >> [drm] - kern.vt.fb.modes.eDP-1 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector DP-1: get mode from tunables: >> [drm] - kern.vt.fb.modes.DP-1 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector HDMI-A-1: get mode from tunables: >> [drm] - kern.vt.fb.modes.HDMI-A-1 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector DP-2: get mode from tunables: >> [drm] - kern.vt.fb.modes.DP-2 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector HDMI-A-2: get mode from tunables: >> [drm] - kern.vt.fb.modes.HDMI-A-2 >> [drm] - kern.vt.fb.default_mode >> [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 >> VT: Replacing driver "efifb" with new "fb". >> start FB_INFO: >> type=3D11 height=3D1440 width=3D2560 depth=3D32 >> cmsize=3D16 size=3D14745600 >> pbase=3D0x2fc0040000 vbase=3D0xfffffe0092a40000 >> name=3Ddrmn0 flags=3D0x0 stride=3D10240 bpp=3D32 >> cmap[0]=3D0 cmap[1]=3D7f0000 cmap[2]=3D7f00 cmap[3]=3Dc4a000 >> end FB_INFO >> drmn0: fb0: inteldrmfb frame buffer device >> drmn0: successfully loaded firmware image with name: >> i915/kbl_dmc_ver1_04.bin >> [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin >> (v1.4) >> lo0: link state changed to UP >> [drm] Reducing the compressed framebuffer size. This may lead=20 >> to >> less power savings than a non-reduced-size. Try to increase=20 >> stolen >> memory size if available in BIOS. >> iwm0: <Intel(R) Dual Band Wireless AC 8265> mem >> 0xec400000-0xec401fff at device 0.0 on pci1 >> iwm0: hw rev 0x230, fw ver 22.361476.0, address=20 >> 18:1d:ea:16:cc:77 >> wlan0: Ethernet address: 18:1d:ea:16:cc:77 >> wlan0: link state changed to UP >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> bridge0: Ethernet address: 02:19:47:22:6e:00 >> bridge0: changing name to 'vm-public' >> em0: promiscuous mode enabled >> vm-public: link state changed to UP >> Security policy loaded: MAC/ntpd (mac_ntpd) >> hdac0: Command timeout on address 2 >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> (disconnected) >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> wmt0 on uhub0 >> wmt0: <Multitouch> on usbus0 >> wmt0: 16 contacts and [C]. Report range [0:0] - [12372:6960] >> wmt0: 10 feature report contactsuhid0 on uhub0 >> uhid0: <Pen> on usbus0 >> wmt0: at uhub0, port 10, addr 6 (disconnected) >> wmt0: detached >> uhid0: at uhub0, port 10, addr 6 (disconnected) >> uhid0: detached >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> (disconnected) >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> uhid0 on uhub0 >> uhid0: <Pen> on usbus0 >> uhid0: at uhub0, port 10, addr 7 (disconnected) >> uhid0: detached >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> (disconnected) >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> wmt0 on uhub0 >> wmt0: <Multitouch> on usbus0 >> wmt0: 16 contacts and [C]. Report range [0:0] - [12372:6960] >> wmt0: 10 feature report contactsuhid0 on uhub0 >> uhid0: <Pen> on usbus0 >> wmt0: at uhub0, port 10, addr 8 (disconnected) >> wmt0: detached >> uhid0: at uhub0, port 10, addr 8 (disconnected) >> uhid0: detached >> pid 98094 (emacs-26.3), jid 0, uid 1001: exited on signal 6=20 >> (core >> dumped) >> wlan0: link state changed to DOWN >> Waiting (max 60 seconds) for system process `vnlru' to >> stop... done >> Waiting (max 60 seconds) for system process `syncer' to stop... >> Syncing disks, vnodes remaining... 0 0 0 0 0 done >> Waiting (max 60 seconds) for system thread `bufdaemon' to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-0'=20 >> to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-1'=20 >> to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-2'=20 >> to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-3'=20 >> to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-4'=20 >> to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-5'=20 >> to >> stop... done >> Waiting (max 60 seconds) for system thread `bufspacedaemon-6'=20 >> to >> stop... done >> All buffers synced. >> Uptime: 6m12s >> GEOM_ELI: Device nvd0p3.eli destroyed. >> GEOM_ELI: Detached nvd0p3.eli on last close. >> GEOM_ELI: Device nvd0p4.eli destroyed. >> GEOM_ELI: Detached nvd0p4.eli on last close. >> ---<<BOOT>>--- >> Copyright (c) 1992-2019 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, >> 1993, 1994 >> The Regents of the University of California. All rights >> reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 12.1-STABLE r353466 GENERIC amd64 >> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581)=20 >> (based >> on LLVM 8.0.1) >> VT(efifb): resolution 2560x1440 >> CPU: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (1992.09-MHz >> K8-class CPU) >> Origin=3D"GenuineIntel" Id=3D0x806ea Family=3D0x6 Model=3D0x8e >> Stepping=3D10 >> >> Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P= GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> Features2=3D0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE= 3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AES= NI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> >> AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> >> AMD Features2=3D0x121<LAHF,ABM,Prefetch> >> Structured Extended >> >> Features=3D0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCI= D,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> >> Structured Extended=20 >> Features3=3D0x9c000000<IBPB,STIBP,L1DFL,SSBD> >> XSAVE Features=3D0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> >> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> TSC: P-state invariant, performance statistics >> real memory =3D 17179869184 (16384 MB) >> avail memory =3D 16357519360 (15599 MB) >> Event timer "LAPIC" quality 600 >> ACPI APIC Table: <LENOVO TP-N25 > >> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs >> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads >> random: unblocking device. >> ioapic0 <Version 2.0> irqs 0-119 on motherboard >> Launching APs: 1 7 4 2 3 5 6 >> Timecounter "TSC" frequency 1992088351 Hz quality 1000 >> Cuse v0.1.36 @ /dev/cuse >> random: entropy device external interface >> 000.000020 [4335] netmap_init netmap: loaded=20 >> module >> [ath_hal] loaded >> module_register_init: MOD_LOAD (vesa, 0xffffffff8114d4d0, 0)=20 >> error >> 19 >> random: registering fast source Intel Secure Key RNG >> random: fast provider: "Intel Secure Key RNG" >> kbd1 at kbdmux0 >> nexus0 >> efirtc0: <EFI Realtime Clock> on motherboard >> efirtc0: registered as a time-of-day clock, resolution=20 >> 1.000000s >> cryptosoft0: <software crypto> on motherboard >> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on=20 >> motherboard >> acpi0: <LENOVO TP-N25> on motherboard >> acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66=20 >> on >> acpi0 >> acpi0: Power Button (fixed) >> unknown: memory range not supported >> cpu0: <ACPI CPU> on acpi0 >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff=20 >> on >> acpi0 >> Timecounter "HPET" frequency 24000000 Hz quality 950 >> Event timer "HPET" frequency 24000000 Hz quality 550 >> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 >> atrtc0: Warning: Couldn't map I/O. >> atrtc0: registered as a time-of-day clock, resolution 1.000000s >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b=20 >> on >> acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem >> 0x2fe0000000-0x2fe0ffffff,0x2fc0000000-0x2fdfffffff at device=20 >> 2.0 >> on pci0 >> acpi_video0: <ACPI video extension> on vgapci0 >> vgapci0: Boot video device >> pci0: <old, non-VGA display device> at device 19.0 (no driver >> attached) >> xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem >> 0x2fe1010000-0x2fe101ffff at device 20.0 on pci0 >> xhci0: 32 bytes context size, 64-bit DMA >> usbus0 on xhci0 >> usbus0: 5.0Gbps Super Speed USB v3.0 >> pci0: <simple comms> at device 22.0 (no driver attached) >> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> pci1: <network> at device 0.0 (no driver attached) >> pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 >> pci2: <ACPI PCI bus> on pcib2 >> pci2: <wireless controller> at device 0.0 (no driver attached) >> pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 >> pci3: <ACPI PCI bus> on pcib3 >> nvme0: <Generic NVMe Device> mem 0xec200000-0xec203fff at=20 >> device >> 0.0 on pci3 >> pcib4: <ACPI PCI-PCI bridge> at device 29.0 on pci0 >> pci4: <ACPI PCI bus> on pcib4 >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> pci0: <memory> at device 31.2 (no driver attached) >> hdac0: <Intel Kaby Lake-LP HDA Controller> mem >> 0x2fe1028000-0x2fe102bfff,0x2fe1000000-0x2fe100ffff at device=20 >> 31.3 >> on pci0 >> em0: <Intel(R) PRO/1000 Network Connection> mem >> 0xec500000-0xec51ffff at device 31.6 on pci0 >> em0: Using 1024 TX descriptors and 1024 RX descriptors >> em0: Using an MSI interrupt >> em0: Ethernet address: 48:2a:e3:1a:da:58 >> em0: netmap queues/slots: TX 1/1024, RX 1/1024 >> acpi_button0: <Sleep Button> on acpi0 >> acpi_lid0: <Control Method Lid Switch> on acpi0 >> acpi_tz0: <Thermal Zone> on acpi0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on >> acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> psm0: [GIANT-LOCKED] >> psm0: model Generic PS/2 mouse, device ID 0 >> acpi_acad0: <AC Adapter> on acpi0 >> battery0: <ACPI Control Method Battery> on acpi0 >> est0: <Enhanced SpeedStep Frequency Control> on cpu0 >> ZFS filesystem version: 5 >> ZFS storage pool version: features support (5000) >> Timecounters tick every 1.000 msec >> ugen0.1: <0x8086 XHCI root HUB> at usbus0 >> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>=20 >> on >> usbus0 >> nvd0: <SAMSUNG MZVLB1T0HALR-000L7> NVMe namespace >> nvd0: 976762MB (2000409264 512 byte sectors) >> GEOM_ELI: Device nvd0p4.eli created. >> hdacc0: GEOM_ELI: Encryption: AES-XTS 256 >> GEOM_ELI: Crypto: hardware >> <Realtek ALC285 HDA CODEC> at cad 0 on hdac0 >> hdaa0: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc0 >> pcm0: <Realtek ALC285 (Internal Analog)> at nid 20 and 18 on=20 >> hdaa0 >> pcm1: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa0 >> hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 >> hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on=20 >> hdacc1 >> pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 >> Trying to mount root from zfs:zroot/ROOT/default []... >> Root mount waiting for: usbus0 >> uhub0: 18 ports with 18 removable, self powered >> Root mount waiting for: usbus0 >> ugen0.2: <vendor 0x8087 product 0x0a2b> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.3: <SunplusIT Inc Integrated Camera> at usbus0 >> ugen0.4: <vendor 0x06cb product 0x009a> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.5: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.6: <Generic USB3.0-CRW> at usbus0 >> umass0 on uhub0 >> umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 >> umass0: SCSI over Bulk-Only; quirks =3D 0x4000 >> umass0:0:0: Attached to scbus0 >> (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00=20 >> 00 >> 00 00 10 00 00 >> (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error >> (probe0:umass-sim0:0:0:0): SCSI status: Check Condition >> (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 >> (Invalid field in CDB) >> (probe0:umass-sim0:0:0:0): Error 22, Unretryable error >> GEOM_ELI: Device nvd0p3.eli created. >> GEOM_ELI: Encryption: AES-XTS 128 >> GEOM_ELI: Crypto: hardware >> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 >> da0: <Generic- SD/MMC CRW 1.00> Removable Direct Access SPC-4=20 >> SCSI >> device >> da0: Serial Number 28203008282014000 >> da0: 400.000MB/s transfers >> da0: 121942MB (249737216 512 byte sectors) >> da0: quirks=3D0x2<NO_6_BYTE> >> drmn0: <drmn> on vgapci0 >> vgapci0: child drmn0 requested pci_enable_io >> vgapci0: child drmn0 requested pci_enable_io >> [drm] Unable to create a private tmpfs mount, hugepage support >> will be disabled(-19). >> Failed to add WC MTRR for [0x2fc0000000-0x2fdfffffff]: -22; >> performance may suffer >> [drm] Got stolen memory base 0xaa800000, size 0x2000000 >> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >> [drm] Driver supports precise vblank timestamp query. >> [drm] Connector eDP-1: get mode from tunables: >> [drm] - kern.vt.fb.modes.eDP-1 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector DP-1: get mode from tunables: >> [drm] - kern.vt.fb.modes.DP-1 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector HDMI-A-1: get mode from tunables: >> [drm] - kern.vt.fb.modes.HDMI-A-1 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector DP-2: get mode from tunables: >> [drm] - kern.vt.fb.modes.DP-2 >> [drm] - kern.vt.fb.default_mode >> [drm] Connector HDMI-A-2: get mode from tunables: >> [drm] - kern.vt.fb.modes.HDMI-A-2 >> [drm] - kern.vt.fb.default_mode >> [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 >> VT: Replacing driver "efifb" with new "fb". >> start FB_INFO: >> type=3D11 height=3D1440 width=3D2560 depth=3D32 >> cmsize=3D16 size=3D14745600 >> pbase=3D0x2fc0040000 vbase=3D0xfffffe0092240000 >> name=3Ddrmn0 flags=3D0x0 stride=3D10240 bpp=3D32 >> cmap[0]=3D0 cmap[1]=3D7f0000 cmap[2]=3D7f00 cmap[3]=3Dc4a000 >> end FB_INFO >> drmn0: fb0: inteldrmfb frame buffer device >> lo0: link state changed to UP >> drmn0: successfully loaded firmware image with name: >> i915/kbl_dmc_ver1_04.bin >> [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin >> (v1.4) >> [drm] Reducing the compressed framebuffer size. This may lead=20 >> to >> less power savings than a non-reduced-size. Try to increase=20 >> stolen >> memory size if available in BIOS. >> iwm0: <Intel(R) Dual Band Wireless AC 8265> mem >> 0xec400000-0xec401fff at device 0.0 on pci1 >> iwm0: hw rev 0x230, fw ver 22.361476.0, address=20 >> 18:1d:ea:16:cc:77 >> wlan0: Ethernet address: 18:1d:ea:16:cc:77 >> wlan0: link state changed to UP >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> hdacc1: Unexpected unsolicited response with tag 63: ffffffff >> >> >> -- >> Mathias Picker >> Gesch=C3=A4ftsf=C3=BChrer >> Mathias.Picker@virtual-earth.de >> >> virtual earth Gesellschaft f=C3=BCr Wissens re/pr=C3=A4 sentation mbH >> http://www.virtual-earth.de/ HRB126870 >> support@virtual-earth.de Westendstr. 142 >> 089 / 1250 3943 >> --=20 Mathias Picker=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20 Gesch=C3=A4ftsf=C3=BChrer Mathias.Picker@virtual-earth.de virtual earth Gesellschaft f=C3=BCr Wissens re/pr=C3=A4 sentation mbH http://www.virtual-earth.de/ HRB126870 support@virtual-earth.de Westendstr. 142 089 / 1250 3943=20=20=20=20=20=20=20=20=20=20=20=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86o8yg1ypt.fsf>