Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 15 Feb 2002 08:20:56 -0800 (PST)
From:      Vinod Namboodiri <geekvinod@yahoo.com>
To:        Jason Hunt <leth@primus.ca>
Cc:        freebsd-net@freebsd.org, freebsd-mobile@freebsd.org
Subject:   Re: MAC Layer of TCP/IP stack
Message-ID:  <20020215162056.49296.qmail@web21106.mail.yahoo.com>
In-Reply-To: <Pine.BSF.4.40.0202141830390.55195-100000@lethargic.dyndns.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Not actually.Its more to run QoS experiments and need
to customize some medium access protocols like csma/ca
e.t.c.Guess i cant get to the csma protocol from the
freebsd tcp/ip stack source code.
Vinod

--- Jason Hunt <leth@primus.ca> wrote:
> If you mean that you would like to change the MAC
> address that the card
> has programmed into it, then yes you can change it,
> but not perminatly.
> The MAC address is hard-coded into the card, and is
> restored on a reboot
> if you change it.  You can configure the machine to
> use a MAC address that
> you specify by using the option I've pasted below.
> 
> This is from the ifconfig(8) man page:
> 
> lladdr addr
>         Set the link-level address on an interface.
> This can be used to
>         e.g. set a new MAC address on an ethernet
> interface, though the
>         mechanism used is not ethernet-specific. The
> address addr is
>         specified as a series of colon-separated hex
> digits.  If the
>         interface is already up when this option is
> used, it will be
>         briefly brought down and then brought back
> up again in order to
>         insure that the receive filter in the
> underlying ethernet hard-
>         ware is properly reprogrammed.
> 
> 
> Hope this helps.
> 
> 
> On Thu, 14 Feb 2002, Vinod Namboodiri wrote:
> 
> > Hi there.I am about to embark on a research
> project
> > wherein some changes need to be made in the MAC
> layer
> > of the TCP/IP stack.We have a wireless testbed
> running
> > on FreeBSD.I had a few doubts.can i make the
> changes
> > from the TCP/IP stack source code of FreeBSD?I
> dont
> > know much about the source code of the stack.or
> would
> > i need to be modifying the firmware of the
> wireless
> > network card which probably has the mac layer
> code?
> >
> > Could use some help.
> > Vinod
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Send FREE Valentine eCards with Yahoo! Greetings!
> > http://greetings.yahoo.com
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-mobile" in the body of
> the message
> >
> >
> 
> 


__________________________________________________
Do You Yahoo!?
Got something to say? Say it better with Yahoo! Video Mail 
http://mail.yahoo.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020215162056.49296.qmail>