Date: Tue, 12 Feb 2013 17:21:52 +0200 From: Daniel Braniss <danny@cs.huji.ac.il> To: freebsd-stable@freebsd.org Subject: ix? / Intel(R) PRO/10GbE Message-ID: <E1U5Hg8-0007wo-5r@kabab.cs.huji.ac.il>
next in thread | raw e-mail | index | archive | help
I finally got a 10G card that is recognized by FreeBSD (9.1-stable):
...
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.4.8> port
0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 at device
0.0 on pci4
ix0: Using MSIX interrupts with 9 vectors
ix0: RX Descriptors exceed system mbuf max, using default instead!
ix0: Ethernet address: 90:e2:ba:29:c0:54
ix0: PCI Express Bus: Speed 5.0Gb/s Width x8
...
but it apperas as ix0/ix1, manuals only mention ixgb/e,
and ifconfig:
ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS
UM,TSO4,VLAN_HWTSO>
ether 90:e2:ba:29:c0:54
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS
UM,TSO4,VLAN_HWTSO>
ether 90:e2:ba:29:c0:55
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
and pciconf:
ix0@pci0:4:0:0: class=0x020000 card=0x7a118086 chip=0x10fb8086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82599EB 10-Gigabit SFI/SFP+ Network Connection'
class = network
subclass = ethernet
Secondly how is this fixable:
RX Descriptors exceed system mbuf max, using default instead!
thanks,
danny
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1U5Hg8-0007wo-5r>