Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Jun 2002 13:14:49 -0700 (PDT)
From:      Walid Nehme <walidn@yahoo.com>
To:        freebsd questions <freebsd-questions@freebsd.org>
Subject:   /kernel message
Message-ID:  <20020619201449.61444.qmail@web10005.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
Dear sirs.
I always get this message on the console
/kernel: arplookup 13.10.15.10 failed: host is not on local
network.
what does that mean.

as i have localnet of 10.20.x.x
and on the free i have a realip.
also after executing dmesg i have that message at the end
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at
device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator>
at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at
device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem
0xfeaffc00-0xfeaffcff ir
q 3 at device 10.0 on pci2
rl0: Ethernet address: 00:02:44:31:07:60
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
rl1: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem
0xfeaff800-0xfeaff8ff ir
q 9 at device 11.0 on pci2
rl1: Ethernet address: 00:02:44:31:07:37
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at
device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf
at device 31.1 on pci
0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> at
31.2 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3
irq 10
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> at
31.4 irq 9
orm0: <Option ROMs> at iomem
0xc0000-0xcffff,0xd0000-0xd0fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
IP packet filtering initialized, divert disabled,
rule-based forwarding enabled,
 default to deny, logging limited to 10 packets/entry by
default
DUMMYNET initialized (011031)
BRIDGE 011031, have 5 interfaces
-- index 1  type 6 phy 0 addrl 6 addr 00.02.44.31.07.60
-- index 2  type 6 phy 0 addrl 6 addr 00.02.44.31.07.37
ad0: 39082MB <Maxtor 94098U8> [79406/16/63] at ata0-master
UDMA66
Mounting root from ufs:/dev/ad0s1a
>> now rl0 promisc ON if_flags 0xffff8943 bdg_flags 0x5
>> now rl1 promisc ON if_flags 0xffff8943 bdg_flags 0x5
arplookup 13.10.15.10 failed: host is not on local network
arplookup 13.10.15.10 failed: host is not on local network
arplookup 13.10.15.10 failed: host is not on local network
arplookup 13.10.15.10 failed: host is not on local network

and while trying to use tcpdump net 10.20.38.22 i also
SOMETIMES get this message.
tcpdump net 10.20.38.22
tcpdump: listening on rl0
01:14:46.755854 arp who-has 10.20.38.22 tell 13.10.15.10


=====
Regards.
Walid Nehme
ICQ:5855336 
MSN:nastylid@hotmail.com
"The only reason I'm burning my candle at both ends, is because I haven't figured out how to light the middle yet"

__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020619201449.61444.qmail>