Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Jan 2014 16:51:32 +0100
From:      Gerrit =?ISO-8859-1?Q?K=FChn?= <gerrit.kuehn@aei.mpg.de>
To:        Hans Petter Selasky <hps@bitfrost.no>
Cc:        freebsd-usb@FreeBSD.org
Subject:   Re: ATP USB flash failure (regression?)
Message-ID:  <20140124165132.56545d9c.gerrit.kuehn@aei.mpg.de>
In-Reply-To: <27917_1390577523_52E28773_27917_101_1_20140124163140.54d4e36e.gerrit.kuehn@aei.mpg.de>
References:  <20140122134116.1c589702.gerrit.kuehn@aei.mpg.de> <52DFC03F.6090002@bitfrost.no> <20140122154508.0958e414.gerrit.kuehn@aei.mpg.de> <52DFDBE8.10004@bitfrost.no> <20140122161205.77018862.gerrit.kuehn@aei.mpg.de> <52E01CCD.8010000@bitfrost.no> <20140123095901.23d9d9ea.gerrit.kuehn@aei.mpg.de> <52E0E6E0.2030000@bitfrost.no> <20140123110042.0177d63e.gerrit.kuehn@aei.mpg.de> <52E0EA0E.9020306@bitfrost.no> <20140124160410.d8c30e7a.gerrit.kuehn@aei.mpg.de> <52E281D6.9060004@bitfrost.no> <27917_1390577523_52E28773_27917_101_1_20140124163140.54d4e36e.gerrit.kuehn@aei.mpg.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 24 Jan 2014 16:31:40 +0100 Gerrit K=FChn <gerrit.kuehn@aei.mpg.de>
wrote about Re: ATP USB flash failure (regression?):

GK> Is it possible that "soft" rebooting is not enough and I need to cycle
GK> the power?

It is possible: after power-cycling the machine, the device is back now:

---
ugen1.4: <ATP Electronics> at usbus1
umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr
4> on usbus1 umass0:  SCSI over Bulk-Only; quirks =3D 0x4000
umass0:8:0:-1: Attached to scbus8
da8 at umass-sim0 bus 0 scbus8 target 0 lun 0
da8: <ATP ATP IG eUSB SSD 1100> Fixed Direct Access SCSI-0 device=20
da8: Serial Number 9900210100751207
da8: 40.000MB/s transfers
da8: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C)
da8: quirks=3D0x2<NO_6_BYTE>
---


Thank you very much for your patient support!
Will these quirks make it back into the repo, or do I have to keep this as
a local patch here?


cu
  Gerrit



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140124165132.56545d9c.gerrit.kuehn>