Date: Thu, 7 Nov 2002 17:01:20 +0100 (CET) From: Are Bryne <are.bryne@communique.no> To: FreeBSD questions list <freebsd-questions@freebsd.org> Subject: ahc: Unexpected busfree in Message-out phase Message-ID: <20021107155432.T569-100000@david.i.communique.no>
next in thread | raw e-mail | index | archive | help
[Please cc me, as I'm not on the -questions list. Thanks] Hello, With a the following setup: pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 [...] ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xffbfc000-0xffbfcfff irq 9 at device 2.0 on pci0 ahc0: Using left over BIOS settings aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs [...] da0 at ahc0 bus 0 target 1 lun 0 da0: <SEAGATE ST32550N 8303> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C) I am getting errors of the kind shown below. Would anyone know what the most likely causes of this is? Could it be just a bad cable? XXX kernel log messages: > EX = 0x65, ARG_2 = 0xd > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > ahc0:A:1: no active SCB for reconnecting target - issuing BUS DEVICE RESET > SAVED_SCSIID == 0x17, SAVED_LUN == 0x0, ARG_1 == 0x1c ACCUM = 0x0 > SEQ_FLAGS == 0x0, SCBPTR == 0x3, BTT == 0xff, SINDEX == 0x31 > SCSIID == 0x17, SCB_SCSIID == 0x17, SCB_LUN == 0x0, SCB_TAG == 0xff, SCB_CONTROL == 0x0 > SCSIBUSL == 0x1c, SCSISIGI == 0xe6 > SXFRCTL0 == 0x88 > SEQCTL == 0x10 > ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x1af > ACCUM = 0x0, SINDEX = 0x31, DINDEX = 0xc0, ARG_2 = 0x7 > HCNT = 0x0 SCBPTR = 0x3 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88 > SSTAT0 = 0x7, SSTAT1 = 0x3 > STACK == 0x189, 0xe4, 0xd5, 0x134 > SCB count = 140 > Kernel NEXTQSCB = 14 > Card NEXTQSCB = 14 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: > QOUTFIFO entries: > Sequencer Free SCB List: 3 11 13 5 6 14 7 2 15 8 9 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x0, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x62, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x62, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x62, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: > Kernel Free SCB list: 28 52 42 45 50 67 48 11 47 69 34 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > ahc0: Bus Device Reset on A:1. 3 SCBs aborted > (da0:ahc0:0:1:0): SCB 0x34 - timed out > ahc0: Dumping Card State in Command phase, at SEQADDR 0xb9 > ACCUM = 0x80, SINDEX = 0xac, DINDEX = 0x8f, ARG_2 = 0xd > HCNT = 0x0 SCBPTR = 0xb > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x36, DFSTATUS = 0x48 > LASTPHASE = 0x80, SCSISIGI = 0xc6, SXFRCTL0 = 0x80 > SSTAT0 = 0x0, SSTAT1 = 0x3 > STACK == 0xb6, 0xfe, 0x159, 0xe4 > SCB count = 140 > Kernel NEXTQSCB = 14 > Card NEXTQSCB = 42 > QINFIFO entries: 42 > Waiting Queue entries: > Disconnected Queue entries: 3:67 14:50 13:28 > QOUTFIFO entries: > Sequencer Free SCB List: 5 6 7 2 15 8 9 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x64, s 0x17, l 0, t 0x43) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0x34) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x64, s 0x17, l 0, t 0x1c) 14(c 0x64, s 0x17, l 0, t 0x32) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 42(c 0x62, s 0x17, l 0), 67(c 0x60, s 0x17, l 0), 50(c 0x60, s 0x17, l 0), 28(c 0x60, s 0x17, l 0), 52(c 0x60, s 0x17, l 0) > Kernel Free SCB list: 45 48 11 47 69 34 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x347d000 : Length 4096 > sg[1] - Addr 0x32be000 : Length 4096 > (da0:ahc0:0:1:0): BDR message in message buffer > (da0:ahc0:0:1:0): SCB 0x34 - timed out > ahc0: Dumping Card State in Command phase, at SEQADDR 0xb9 > ACCUM = 0x80, SINDEX = 0xac, DINDEX = 0x8f, ARG_2 = 0xd > HCNT = 0x0 SCBPTR = 0xb > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x36, DFSTATUS = 0x48 > LASTPHASE = 0x80, SCSISIGI = 0xd6, SXFRCTL0 = 0x80 > SSTAT0 = 0x0, SSTAT1 = 0x3 > STACK == 0xb6, 0xfe, 0x159, 0xe4 > SCB count = 140 > Kernel NEXTQSCB = 14 > Card NEXTQSCB = 42 > QINFIFO entries: 42 > Waiting Queue entries: > Disconnected Queue entries: 3:67 14:50 13:28 > QOUTFIFO entries: > Sequencer Free SCB List: 5 6 7 2 15 8 9 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x64, s 0x17, l 0, t 0x43) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0x34) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x64, s 0x17, l 0, t 0x1c) 14(c 0x64, s 0x17, l 0, t 0x32) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 42(c 0x62, s 0x17, l 0), 67(c 0x60, s 0x17, l 0), 50(c 0x60, s 0x17, l 0), 28(c 0x60, s 0x17, l 0), 52(c 0x60, s 0x17, l 0) > Kernel Free SCB list: 45 48 11 47 69 34 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x347d000 : Length 4096 > sg[1] - Addr 0x32be000 : Length 4096 > (da0:ahc0:0:1:0): no longer in timeout, status = 34b > ahc0: Issued Channel A Bus Reset. 5 SCBs aborted > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > ahc0:A:1: no active SCB for reconnecting target - issuing BUS DEVICE RESET > SAVED_SCSIID == 0x17, SAVED_LUN == 0x0, ARG_1 == 0x2d ACCUM = 0x0 > SEQ_FLAGS == 0x0, SCBPTR == 0xb, BTT == 0xff, SINDEX == 0x31 > SCSIID == 0x17, SCB_SCSIID == 0x17, SCB_LUN == 0x0, SCB_TAG == 0xff, SCB_CONTROL == 0x0 > SCSIBUSL == 0x2d, SCSISIGI == 0xe6 > SXFRCTL0 == 0x88 > SEQCTL == 0x10 > ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x1af > ACCUM = 0x0, SINDEX = 0x31, DINDEX = 0xc0, ARG_2 = 0xb > HCNT = 0x0 SCBPTR = 0xb > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88 > SSTAT0 = 0x7, SSTAT1 = 0x3 > STACK == 0x189, 0xe4, 0xd5, 0x134 > SCB count = 140 > Kernel NEXTQSCB = 67 > Card NEXTQSCB = 67 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: > QOUTFIFO entries: > Sequencer Free SCB List: 11 15 6 14 7 3 2 5 13 8 9 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x60, s 0x17, l 0, t 0xff) 7(c 0x62, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x0, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x62, s 0x17, l 0, t 0xff) 15(c 0x62, s 0x17, l 0, t 0xff) > Pending list: > Kernel Free SCB list: 45 47 14 48 50 11 42 28 52 69 34 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > ahc0: Bus Device Reset on A:1. 1 SCBs aborted > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > ahc0:A:1: no active SCB for reconnecting target - issuing BUS DEVICE RESET > SAVED_SCSIID == 0x17, SAVED_LUN == 0x0, ARG_1 == 0x30 ACCUM = 0x0 > SEQ_FLAGS == 0x0, SCBPTR == 0xb, BTT == 0xff, SINDEX == 0x31 > SCSIID == 0x17, SCB_SCSIID == 0x17, SCB_LUN == 0x0, SCB_TAG == 0xff, SCB_CONTROL == 0x60 > SCSIBUSL == 0x30, SCSISIGI == 0xe6 > SXFRCTL0 == 0x88 > SEQCTL == 0x10 > ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x1af > ACCUM = 0x0, SINDEX = 0x31, DINDEX = 0xc0, ARG_2 = 0xc > HCNT = 0x0 SCBPTR = 0xb > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88 > SSTAT0 = 0x7, SSTAT1 = 0x3 > STACK == 0x189, 0x159, 0xd5, 0x134 > SCB count = 140 > Kernel NEXTQSCB = 48 > Card NEXTQSCB = 48 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: 7:14 6:45 > QOUTFIFO entries: > Sequencer Free SCB List: 11 14 15 3 2 5 13 8 9 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x64, s 0x17, l 0, t 0x2d) 7(c 0x64, s 0x17, l 0, t 0xe) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x62, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 14(c 0x60, s 0x17, l 0), 45(c 0x60, s 0x17, l 0) > Kernel Free SCB list: 50 47 67 11 42 28 52 69 34 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > ahc0: Bus Device Reset on A:1. 2 SCBs aborted > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > ahc0:A:1: no active SCB for reconnecting target - issuing BUS DEVICE RESET > SAVED_SCSIID == 0x17, SAVED_LUN == 0x0, ARG_1 == 0x2d ACCUM = 0x0 > SEQ_FLAGS == 0x0, SCBPTR == 0x6, BTT == 0xff, SINDEX == 0x31 > SCSIID == 0x17, SCB_SCSIID == 0x17, SCB_LUN == 0x0, SCB_TAG == 0xff, SCB_CONTROL == 0x0 > SCSIBUSL == 0x2d, SCSISIGI == 0xe6 > SXFRCTL0 == 0x88 > SEQCTL == 0x10 > ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x1af > ACCUM = 0x0, SINDEX = 0x31, DINDEX = 0xc0, ARG_2 = 0xb > HCNT = 0x0 SCBPTR = 0x6 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x88 > SSTAT0 = 0x7, SSTAT1 = 0x3 > STACK == 0x189, 0xe4, 0xd5, 0x134 > SCB count = 140 > Kernel NEXTQSCB = 50 > Card NEXTQSCB = 50 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: > QOUTFIFO entries: > Sequencer Free SCB List: 6 7 11 14 15 3 2 5 13 8 9 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x0, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x60, s 0x17, l 0, t 0xff) 14(c 0x62, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: > Kernel Free SCB list: 45 48 14 47 67 11 42 28 52 69 34 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > ahc0: Bus Device Reset on A:1. 2 SCBs aborted > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > (da0:ahc0:0:1:0): WRITE(10). CDB: 2a 0 0 36 e0 7f 0 0 10 0 > (da0:ahc0:0:1:0): ABORTED COMMAND asc:4e,0 > (da0:ahc0:0:1:0): Overlapped commands attempted field replaceable unit: 1 > (da0:ahc0:0:1:0): Unexpected busfree in Message-out phase > SEQADDR == 0x15f > (da0:ahc0:0:1:0): WRITE(06). CDB: a 0 0 cf 10 0 > (da0:ahc0:0:1:0): ABORTED COMMAND asc:4e,0 > (da0:ahc0:0:1:0): Overlapped commands attempted field replaceable unit: 1 > (da0:ahc0:0:1:0): SCB 0x1c - timed out > ahc0: Dumping Card State while idle, at SEQADDR 0x8 > ACCUM = 0xdc, SINDEX = 0x22, DINDEX = 0x8c, ARG_2 = 0x0 > HCNT = 0x0 SCBPTR = 0x9 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x0, DFSTATUS = 0x29 > LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80 > SSTAT0 = 0x5, SSTAT1 = 0xa > STACK == 0x3, 0xfe, 0x159, 0xd5 > SCB count = 140 > Kernel NEXTQSCB = 47 > Card NEXTQSCB = 47 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: 3:14 13:28 > QOUTFIFO entries: > Sequencer Free SCB List: 9 6 2 15 11 14 5 8 7 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x64, s 0x17, l 0, t 0xe) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x62, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x64, s 0x17, l 0, t 0x1c) 14(c 0x60, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 14(c 0x60, s 0x17, l 0), 28(c 0x60, s 0x17, l 0) > Kernel Free SCB list: 34 69 45 42 48 67 11 52 50 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x347d000 : Length 4096 > sg[1] - Addr 0x32be000 : Length 4096 > (da0:ahc0:0:1:0): Queuing a BDR SCB > (da0:ahc0:0:1:0): Bus Device Reset Message Sent > (da0:ahc0:0:1:0): no longer in timeout, status = 34b > ahc0: Bus Device Reset on A:1. 2 SCBs aborted > (da0:ahc0:0:1:0): SCB 0xe - timed out > ahc0: Dumping Card State in Status phase, at SEQADDR 0x15f > ACCUM = 0xc0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0xd > HCNT = 0x0 SCBPTR = 0x9 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xc0, SCSISIGI = 0xc6, SXFRCTL0 = 0x88 > SSTAT0 = 0x5, SSTAT1 = 0x2 > STACK == 0xfe, 0x159, 0xe4, 0x37 > SCB count = 140 > Kernel NEXTQSCB = 47 > Card NEXTQSCB = 47 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: 13:34 > QOUTFIFO entries: > Sequencer Free SCB List: 3 6 2 15 11 14 5 8 7 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x62, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x62, s 0x17, l 0, t 0xe) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x64, s 0x17, l 0, t 0x22) 14(c 0x60, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 34(c 0x60, s 0x17, l 0), 14(c 0x62, s 0x17, l 0) > Kernel Free SCB list: 28 69 45 42 48 67 11 52 50 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x1e4c000 : Length 2048 > (da0:ahc0:0:1:0): BDR message in message buffer > (da0:ahc0:0:1:0): SCB 0xe - timed out > ahc0: Dumping Card State in Status phase, at SEQADDR 0x15f > ACCUM = 0xc0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0xd > HCNT = 0x0 SCBPTR = 0x9 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xc0, SCSISIGI = 0xd6, SXFRCTL0 = 0x88 > SSTAT0 = 0x5, SSTAT1 = 0x2 > STACK == 0xfe, 0x159, 0xe4, 0x37 > SCB count = 140 > Kernel NEXTQSCB = 47 > Card NEXTQSCB = 47 > QINFIFO entries: > Waiting Queue entries: > Disconnected Queue entries: 13:34 > QOUTFIFO entries: > Sequencer Free SCB List: 3 6 2 15 11 14 5 8 7 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x62, s 0x17, l 0, t 0xff) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x62, s 0x17, l 0, t 0xe) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x64, s 0x17, l 0, t 0x22) 14(c 0x60, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 34(c 0x60, s 0x17, l 0), 14(c 0x62, s 0x17, l 0) > Kernel Free SCB list: 28 69 45 42 48 67 11 52 50 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x1e4c000 : Length 2048 > (da0:ahc0:0:1:0): no longer in timeout, status = 34b > ahc0: Issued Channel A Bus Reset. 2 SCBs aborted > (da0:ahc0:0:1:0): SCB 0x43 - timed out > ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x43 > ACCUM = 0x4, SINDEX = 0x64, DINDEX = 0x65, ARG_2 = 0x10 > HCNT = 0x0 SCBPTR = 0x6 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xe0, SCSISIGI = 0xe6, SXFRCTL0 = 0x80 > SSTAT0 = 0x5, SSTAT1 = 0x2 > STACK == 0x102, 0x189, 0x159, 0x37 > SCB count = 140 > Kernel NEXTQSCB = 28 > Card NEXTQSCB = 47 > QINFIFO entries: 47 69 45 34 14 42 48 > Waiting Queue entries: > Disconnected Queue entries: 6:67 > QOUTFIFO entries: > Sequencer Free SCB List: 15 11 9 3 2 14 13 5 8 7 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x66, s 0x17, l 0, t 0x43) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x62, s 0x17, l 0, t 0xff) 14(c 0x60, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 48(c 0x62, s 0x17, l 0), 42(c 0x60, s 0x17, l 0), 14(c 0x60, s 0x17, l 0), 34(c 0x60, s 0x17, l 0), 45(c 0x60, s 0x17, l 0), 69(c 0x60, s 0x17, l 0), 47(c 0x60, s 0x17, l 0), 67(c 0x62, s 0x17, l 0) > Kernel Free SCB list: 11 52 50 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x2f3e000 : Length 4096 > sg[1] - Addr 0x31bf000 : Length 3072 > (da0:ahc0:0:1:0): BDR message in message buffer > (da0:ahc0:0:1:0): SCB 0x43 - timed out > ahc0: Dumping Card State in Message-in phase, at SEQADDR 0x43 > ACCUM = 0x4, SINDEX = 0x64, DINDEX = 0x65, ARG_2 = 0x10 > HCNT = 0x0 SCBPTR = 0x6 > SCSISEQ = 0x12, SBLKCTL = 0x0 > DFCNTRL = 0x4, DFSTATUS = 0x6d > LASTPHASE = 0xe0, SCSISIGI = 0xf6, SXFRCTL0 = 0x80 > SSTAT0 = 0x5, SSTAT1 = 0x2 > STACK == 0x102, 0x189, 0x159, 0x37 > SCB count = 140 > Kernel NEXTQSCB = 28 > Card NEXTQSCB = 47 > QINFIFO entries: 47 69 45 34 14 42 48 > Waiting Queue entries: > Disconnected Queue entries: 6:67 > QOUTFIFO entries: > Sequencer Free SCB List: 15 11 9 3 2 14 13 5 8 7 12 4 0 1 10 > Sequencer SCB Info: 0(c 0x60, s 0x17, l 0, t 0xff) 1(c 0x60, s 0x17, l 0, t 0xff) 2(c 0x60, s 0x17, l 0, t 0xff) 3(c 0x60, s 0x17, l 0, t 0xff) 4(c 0x60, s 0x17, l 0, t 0xff) 5(c 0x60, s 0x17, l 0, t 0xff) 6(c 0x66, s 0x17, l 0, t 0x43) 7(c 0x60, s 0x17, l 0, t 0xff) 8(c 0x60, s 0x17, l 0, t 0xff) 9(c 0x60, s 0x17, l 0, t 0xff) 10(c 0x60, s 0x17, l 0, t 0xff) 11(c 0x60, s 0x17, l 0, t 0xff) 12(c 0x60, s 0x17, l 0, t 0xff) 13(c 0x62, s 0x17, l 0, t 0xff) 14(c 0x60, s 0x17, l 0, t 0xff) 15(c 0x60, s 0x17, l 0, t 0xff) > Pending list: 48(c 0x62, s 0x17, l 0), 42(c 0x60, s 0x17, l 0), 14(c 0x60, s 0x17, l 0), 34(c 0x60, s 0x17, l 0), 45(c 0x60, s 0x17, l 0), 69(c 0x60, s 0x17, l 0), 47(c 0x60, s 0x17, l 0), 67(c 0x62, s 0x17, l 0) > Kernel Free SCB list: 11 52 50 57 37 7 38 51 0 8 41 15 39 49 18 40 2 3 68 32 44 6 56 12 23 31 36 13 30 21 9 22 1 58 19 29 26 5 10 16 20 27 17 4 25 46 55 66 33 43 54 59 24 53 35 139 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 > sg[0] - Addr 0x2f3e000 : Length 4096 > sg[1] - Addr 0x31bf000 : Length 3072 > (da0:ahc0:0:1:0): no longer in timeout, status = 34b > ahc0: Issued Channel A Bus Reset. 8 SCBs aborted Apologies for the somewhat long extract. Thank you in advance. Regards, Are Bryne -- Communiqué DA Office: +47 22 44 33 99 Postboks 9050 Grønland Mobile: +47 900 22 009 NO-0133 Oslo URL: http://www.communique.no To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021107155432.T569-100000>