Date: Sat, 28 Oct 2000 21:36:18 +0900 From: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org> To: msmith@mass.osd.bsdi.com Cc: mobile@FreeBSD.org Subject: Re: [CardBus] NEWCARD with IBM ThinkPad600 Message-ID: <200010281236.e9SCaI202942@lavender.sanpei.org> In-Reply-To: Your message of "Sat, 28 Oct 2000 01:43:39 -0700" References: <200010280843.e9S8hdF03827@mass.osd.bsdi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>Ack. Can you please fetch, compile and run > > http://people.freebsd.org/~msmith/pir.c > >and send us the output? (please include these dmesg messages as well, in >case I lose them). OK, I executed. ---pir output--- $PIR table at 0x28118e10 version 1.0 PCI interrupt router at 0:3.8 vendor 0x0 device 0x0 PCI-only interrupts [ 11 ] entry bus slot device 00: 00 00 07 INTA 60 [ 3 4 5 6 7 9 10 11 12 14 15] INTB 00 [ ] INTC 00 [ ] INTD 63 [ 3 4 5 6 7 9 10 11 12 14 15] 01: 00 00 02 INTA 60 [ 3 4 5 6 7 9 10 11 12 14 15] INTB 61 [ 3 4 5 6 7 9 10 11 12 14 15] INTC 00 [ ] INTD 00 [ ] 02: 00 00 03 INTA 60 [ 3 4 5 6 7 9 10 11 12 14 15] INTB 00 [ ] INTC 00 [ ] INTD 00 [ ] 03: 00 00 04 INTA 60 [ 3 4 5 6 7 9 10 11 12 14 15] INTB 61 [ 3 4 5 6 7 9 10 11 12 14 15] INTC 62 [ 3 4 5 6 7 9 10 11 12 14 15] INTD 63 [ 3 4 5 6 7 9 10 11 12 14 15] ----------------- ---dmesg--- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Sat Oct 28 21:23:12 JST 2000 sanpei@cherry.sanpei.org:/usr/src/sys/compile/NEWCARD Calibrating clock(s) ... TSC clock: 265248821 Hz, i8254 clock: 1193118 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 265265226 Hz CPU: Pentium II/Pentium II Xeon/Celeron (265.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201129984 (196416K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0048c000 - 0x0bfc7fff, 196329472 bytes (47932 pages) avail memory = 191102976 (186624K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd800 bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd880+0x0 pnpbios: Found PnP BIOS data at 0xc00fe700 pnpbios: Entry = f0000:e724 Rev = 1.0 pnpbios: Event flag at 415 Other BIOS signatures found: Preloaded elf kernel "kernel.newcard" at 0xc0473000. null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000064 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) Using $PIR table, 4 entries at 0xc00f9e30 acpi0: <IBM TP600 > on motherboard acpi0: power button is handled as a fixed feature programming model. acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0 acpi_tz0: <thermal zone> on acpi0 ACPI: Illegal EC read from 0x3a ACPI: Illegal EC write 0x0 to 0x3a ACPI: Illegal EC read from 0x52 ACPI: Illegal EC write 0x2 to 0x52 ACPI: Illegal EC read from 0x53 ACPI: Illegal EC write 0x4 to 0x53 ACPI: Illegal EC read from 0x50 ACPI: Illegal EC write 0xb to 0x50 ACPI: Illegal EC read from 0x50 ACPI: Illegal EC read from 0x51 -0213: *** Warning: An AML "Fatal" Opcode (FatalOp) was executed acpi_tz0: current temperature 26.8C acpi_tz1: <thermal zone> on acpi0 acpi_tz1: current temperature 26.8C acpi_tz2: <thermal zone> on acpi0 acpi_tz2: current temperature 26.8C acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Control Method Sleep Button Device> on acpi0 acpi_pcib0: <Host-PCI bridge> on acpi0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 3, range 32, base 00000000, size 28, enabled found-> vendor=0x104c, dev=0xac16, revid=0x02 bus=0, slot=2, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=3 secondarybus=1 intpin=a, irq=255 map[10]: type 1, range 32, base 20301000, size 12, enabled found-> vendor=0x104c, dev=0xac16, revid=0x02 bus=0, slot=2, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=6 secondarybus=4 intpin=b, irq=255 map[10]: type 1, range 32, base 20300000, size 12, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 3, range 32, base e0000000, size 24, enabled map[14]: type 1, range 32, base 20000000, size 21, enabled map[18]: type 1, range 32, base 20200000, size 20, enabled found-> vendor=0x8086, dev=0x7110, revid=0x01 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 4, range 32, base 0000fcf0, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 4, range 32, base 00008400, size 5, enabled found-> vendor=0x8086, dev=0x7113, revid=0x01 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 4, range 32, base 0000efa0, size 4, enabled pci0: <PCI bus> on acpi_pcib0 pccbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0 pccbb: Unable to map IRQ... device_probe_and_attach: pccbb0 attach returned 12 pccbb1: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0 pccbb: Unable to map IRQ... device_probe_and_attach: pccbb1 attach returned 12 pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 3.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=01 status0=51 status1=fd ata1: mask=01 status0=10 status1=ff ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 11 pci0: <Intel 82371AB Power management controller> (vendor=0x8086, dev=0x7113) at 7.3 acpi_ec0: <embedded controller> on acpi0 npx0: <math processor> on motherboard npx0: INT 16 interface ex_isa_identify() ata-: ata0 already exists, using ata2 instead ata-: ata1 already exists, using ata3 instead Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 unknown: unimplemented Address16 resource unknown: unimplemented Address16 resource unknown: unimplemented Address16 resource unknown: unimplemented Address32 resource unknown: unimplemented Address32 resource unknown: unimplemented Address32 resource too many dependant configs too many dependant configs too many dependant configs too many dependant configs too many dependant configs too many dependant configs too many dependant configs too many dependant configs sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vt0 failed to probe on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 10 on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0x841 0x841 0x841 0x841 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x841 0x841 0x841 0x841 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0: ioaddr is 0x300 sn0: test1 failed sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 fe0 failed to probe at port 0x300 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic1: not probed (disabled) sc1: no video adapter is found. sc1: <System console> failed to probe on isa0 vga1: <Generic ISA VGA> failed to probe on isa0 isa_probe_children: probing PnP devices adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. unknown: <PNP0700> can't assign resources unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 adv1: Invalid baseport of 0x2f8 specified. Nearest valid baseport is 0x330. Failing probe. sio4: configured irq 3 not in bitmap of probed irqs 0 sio4: irq maps: 0x841 0x841 0x841 0x841 sio4: probe failed test(s): 0 1 2 4 6 7 9 unknown: <16550A-compatible COM port> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 adv1: Invalid baseport of 0x3bc specified. Nearest valid baseport is 0x330. Failing probe. ppc1: using normal I/O port range unknown: <Standard parallel printer port> failed to probe at port 0x3bc-0x3bf irq 7 on isa0 adv1: Invalid baseport of 0x278 specified. Nearest valid baseport is 0x330. Failing probe. ppc1: using extended I/O port range unknown: <ECP parallel printer port> failed to probe at port 0x278-0x27f,0x678-0x67a irq 5 on isa0 unknown: <IBM0071> can't assign resources unknown: <IBM0071> at port 0x2e8-0x2ef,0x3f8-0x3ff irq 3 on isa0 adv1: Invalid baseport of 0x538 specified. Nearest valid baseport is 0x330. Failing probe. unknown: <CSC0010> failed to probe at port 0x538-0x53f on isa0 unknown: <CSC0000> can't assign resources unknown: <CSC0000> at port 0xf40-0xf47,0x388-0x38b,0x220-0x233 irq 5 on isa0 adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Failing probe. unknown: <CSC0001> failed to probe at port 0x200-0x207 on isa0 adv1: Invalid baseport of 0x300 specified. Nearest valid baseport is 0x330. Failing probe. unknown: <CSC0003> failed to probe at port 0x300-0x303 on isa0 unknown: <IBM3760> failed to probe at port 0x130,0 irq 10,11 drq 1,0 on isa0 unknown: <PNPB02F> can't assign resources unknown: <PNPB02F> at port 0x201 on isa0 adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0200> can't assign resources unknown: <PNP0200> at port 0x1-0x10,0x80-0x8f,0xc0-0xdf drq 2 on isa0 adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0303> at port 0x60 on isa0 unknown: <IBM3780> can't assign resources unknown: <IBM3780> at irq 12 on isa0 adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. BIOS Geometries: 0:03df7f3f 0..991=992 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached bpf: faith0 attached ata0-master: success setting UDMA2 on PIIX4 chip Creating DISK ad0 ad0: <HITACHI_DK227A-41/00Q0A0A9> ATA-3 disk at ata0-master ad0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: 3909MB <HITACHI_DK227A-41> [7944/16/63] at ata0-master UDMA33 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA CD-ROM XM-1702BC/1566> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 4088447, size 4088385 : OK start_init: trying /sbin/init To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010281236.e9SCaI202942>