Date: Wed, 03 Jul 2002 01:44:00 -0600 From: ertank@softhome.net To: freebsd-questions@freebsd.org Subject: ppp connection hangs Message-ID: <courier.3D22AB40.00001B8F@softhome.net>
next in thread | raw e-mail | index | archive | help
This is a MIME-formatted message. If you see this text it means that your mail software cannot handle MIME-formatted messages. --=_0_6037_1025682240 Content-Type: text/plain; format=flowed; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sorry, I did not used to web mail systems. Forgot the subject Hello, My machine started to hang under heavy loads after I upgraded it from 4.6-RC to 4.6-STABLE. [ozlerplastik] /home/ertank# uname -a FreeBSD ozlerplastik.com 4.6-STABLE FreeBSD 4.6-STABLE #0: Tue Jul 2 21:07:21 EEST 2002 root@ozlerplastik.com:/usr/src/sys/compile/MYKERNEL i386 [ozlerplastik] /home/ertank# System is buildworld as of 01 July stable code. I have "disable lqr" command in my default section of ppp.conf file. I see that remote end is not responding. (I added some firewall rules to be sure because my modem is an internal modem.) There was no problem with either 4.5-STABLE or 4.6-RC. I know this is an odd problem to solve. But, I'm tired of killing and restarting the ppp program during the day. Normally my connection is up 7/24. The document http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/ppp.html suggests to send as much information as I can to the mailing list in the end. My config files and logs are below: *** ppp.conf default: set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) set device /dev/cuaa3 set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 60 CONNECT" set timeout 0 # 3 minute idle timer (the default) disable lqr # Disable line quality reporting for heavy load isp: set phone "0,822,2120000|0,822,212,0003|0,822,211,6003|0,822,211,6015" set authname "<name>" set authkey "<pass>" set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR *** How I start ppp ppp -ddial isp *** ppp.log (I will send only the part between my two connection.) I attached this file. Lines are wrapping too much. And, I do not understand good enough to read my log file. *** netstat -rn output after connecting: I also attached this file. Line problem again. (netstat.out *** netstat -rn output before connecting: Attached as netstat2.out Regards, -- Ertan Küçükoglu ertank@softhome.net --=_0_6037_1025682240 Content-Disposition: attachment; filename="ppp.log" Content-Type: text/plain; charset="iso-8859-1"; name="ppp.log" Content-Transfer-Encoding: 7bit Jul 3 09:12:47 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /usr/local/bin/fetchmail Jul 3 09:13:46 ozlerplastik ppp[14071]: tun0: Phase: deflink: HDLC errors -> FCS: 3, ADDR: 0, COMD: 0, PROTO: 0 Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: Carrier lost Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: CCP: deflink: State change Stopped --> Closed Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: CCP: deflink: State change Closed --> Initial Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: LCP: deflink: LayerDown Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Opened --> Starting Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: open -> lcp Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: deflink: LayerDown: 212.253.32.157 Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Command: isp: iface clear Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /usr/local/bin/fetchamil -q Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: Using trigger address 0.0.0.0 Jul 3 09:57:43 ozlerplastik ppp[15570]: tun0: Warning: exec() of /usr/local/bin/fetchamil failed: No such file or directory Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: deflink: State change Opened --> Starting Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: deflink: LayerFinish. Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: Connect time: 2697 secs: 5494715 octets in, 1389657 octets out Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: : 21569 packets in, 23617 packets out Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: total 2552 bytes/sec, peak 14173 bytes/sec on Wed Jul 3 09:38:27 2002 Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: IPCP: deflink: State change Starting --> Initial Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: bundle: Terminate Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: LCP: deflink: LayerFinish Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Starting --> Initial Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: Disconnected! Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: lcp -> logout Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: Disconnected! Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: logout -> hangup Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: Connect time: 2737 secs: 5558838 octets in, 1464882 octets out Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: : 675917 packets in, 23658 packets out Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: total 2566 bytes/sec, peak 14502 bytes/sec on Wed Jul 3 09:38:25 2002 Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: hangup -> opening Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: bundle: Establish Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Phase: deflink: Enter pause (3) for redialing. Jul 3 09:57:43 ozlerplastik ppp[14071]: tun0: Chat: deflink: Reconnect try 3 of 0 Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: deflink: Redial timer expired. Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Phase: deflink: Connected! Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Phase: deflink: opening -> dial Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Phone: 0,822,2120000 Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Send: AT^M Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Expect(5): OK Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Received: 53333/ARQ/AT^M^M Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Received: OK^M Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Send: ATE1Q0^M Jul 3 09:57:46 ozlerplastik ppp[14071]: tun0: Chat: Expect(5): OK Jul 3 09:57:47 ozlerplastik ppp[14071]: tun0: Chat: Received: ATE1Q0^M^M Jul 3 09:57:47 ozlerplastik ppp[14071]: tun0: Chat: Received: OK^M Jul 3 09:57:47 ozlerplastik ppp[14071]: tun0: Chat: Send: ATDT0,822,2120000^M Jul 3 09:57:49 ozlerplastik ppp[14071]: tun0: Chat: Expect(60): CONNECT Jul 3 09:58:17 ozlerplastik ppp[14071]: tun0: Chat: Received: ATDT0,822,2120000^M^M Jul 3 09:58:17 ozlerplastik ppp[14071]: tun0: Chat: Received: CONNECT Jul 3 09:58:17 ozlerplastik ppp[14071]: tun0: Phase: deflink: dial -> carrier Jul 3 09:58:18 ozlerplastik ppp[14071]: tun0: Phase: deflink: /dev/cuaa3: CD detected Jul 3 09:58:18 ozlerplastik ppp[14071]: tun0: Phase: deflink: carrier -> login Jul 3 09:58:18 ozlerplastik ppp[14071]: tun0: Phase: deflink: login -> lcp Jul 3 09:58:18 ozlerplastik ppp[14071]: tun0: LCP: FSM: Using "deflink" as a transport Jul 3 09:58:18 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Initial --> Closed Jul 3 09:58:18 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Closed --> Stopped Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: deflink: LayerStart Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: deflink: SendConfigReq(4) state = Stopped Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: ACFCOMP[2] Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: PROTOCOMP[2] Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: ACCMAP[6] 0x00000000 Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: MRU[4] 1500 Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: MAGICNUM[6] 0x5e913d3e Jul 3 09:58:19 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Stopped --> Req-Sent Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: deflink: SendConfigReq(4) state = Req-Sent Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: ACFCOMP[2] Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: PROTOCOMP[2] Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: ACCMAP[6] 0x00000000 Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: MRU[4] 1500 Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: MAGICNUM[6] 0x5e913d3e Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: deflink: RecvConfigAck(4) state = Req-Sent Jul 3 09:58:22 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Req-Sent --> Ack-Rcvd Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: deflink: RecvConfigReq(244) state = Ack-Rcvd Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: ACCMAP[6] 0x000a0000 Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: MAGICNUM[6] 0x5cbeeb16 Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: PROTOCOMP[2] Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: ACFCOMP[2] Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: MRRU[4] 1524 Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: ENDDISC[14] Local Addr: user2120000 Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: deflink: SendConfigRej(244) state = Ack-Rcvd Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: MRRU[4] 1524 Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: Sending ident magic 5e913d3e text user-ppp 2.3.3 (built Jul 2 2002) Jul 3 09:58:23 ozlerplastik ppp[14071]: tun0: LCP: deflink: SendIdent(8) state = Ack-Rcvd Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: deflink: RecvConfigReq(245) state = Ack-Rcvd Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: ACCMAP[6] 0x000a0000 Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: MAGICNUM[6] 0x5cbeeb16 Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: PROTOCOMP[2] Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: ACFCOMP[2] Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: ENDDISC[14] Local Addr: user2120000 Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: deflink: SendConfigAck(245) state = Ack-Rcvd Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: ACCMAP[6] 0x000a0000 Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: MAGICNUM[6] 0x5cbeeb16 Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: PROTOCOMP[2] Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: ACFCOMP[2] Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: ENDDISC[14] Local Addr: user2120000 Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: deflink: State change Ack-Rcvd --> Opened Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: deflink: LayerUp Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: Sending ident magic 5e913d3e text user-ppp 2.3.3 (built Jul 2 2002) Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: LCP: deflink: SendIdent(9) state = Opened Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: Phase: bundle: Authenticate Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: Phase: deflink: his = PAP, mine = none Jul 3 09:58:24 ozlerplastik ppp[14071]: tun0: Phase: Pap Output: ozlerplastik ******** Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Phase: Pap Output: ozlerplastik ******** Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Phase: Pap Input: SUCCESS () Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: Using trigger address 0.0.0.0 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: FSM: Using "deflink" as a transport Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: deflink: State change Initial --> Closed Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: deflink: LayerStart. Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: MPPE: Not usable without CHAP81 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: deflink: SendConfigReq(1) state = Closed Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: DEFLATE[4] win 15 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: PRED1[2] Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: deflink: State change Closed --> Req-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Phase: deflink: lcp -> open Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Phase: bundle: Network Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: FSM: Using "deflink" as a transport Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: State change Initial --> Closed Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: LayerStart. Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: SendConfigReq(7) state = Closed Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: IPADDR[6] 0.0.0.0 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: State change Closed --> Req-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: RecvConfigReq(69) state = Req-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: IPADDR[6] 212.253.32.254 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: SendConfigAck(69) state = Req-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: IPADDR[6] 212.253.32.254 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: LCP: deflink: RecvProtocolRej(246) state = Opened Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) was rejected! Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: CCP: deflink: State change Req-Sent --> Stopped Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: RecvConfigNak(7) state = Ack-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: IPADDR[6] 212.253.32.234 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 212.253.32.234 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: SendConfigReq(8) state = Ack-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: IPADDR[6] 212.253.32.234 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: RecvConfigAck(8) state = Ack-Sent Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: State change Ack-Sent --> Opened Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: deflink: LayerUp. Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: IPCP: myaddr 212.253.32.234 hisaddr = 212.253.32.254 Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /etc/ppp/linkup.sh MYADDR Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /usr/sbin/sendmail -q Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /usr/local/bin/squid Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /bin/fm Jul 3 09:58:27 ozlerplastik ppp[14071]: tun0: Command: isp: !bg /usr/local/bin/fetchmail Jul 3 09:59:24 ozlerplastik ppp[14071]: tun0: Phase: deflink: HDLC errors -> FCS: 2, ADDR: 0, COMD: 0, PROTO: 0 --=_0_6037_1025682240 Content-Disposition: attachment; filename="netstat.out" Content-Type: text/plain; charset="iso-8859-1"; name="netstat.out" Content-Transfer-Encoding: 7bit [ozlerplastik] /home/ertank# netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 212.253.32.254 UGSc 7 0 tun0 127.0.0.1 127.0.0.1 UH 1 13199 lo0 192.168.0 link#1 UC 19 0 xl0 192.168.0.2 00:04:ac:de:f2:b5 UHLW 1 80 xl0 1049 192.168.0.11 00:80:48:fb:5b:5f UHLW 0 4069 xl0 227 192.168.0.15 00:10:5a:66:fe:5f UHLW 0 1292 xl0 1045 192.168.0.16 00:01:02:c2:95:7f UHLW 1 4829 xl0 838 192.168.0.20 00:08:02:16:d9:0e UHLW 323 60139 xl0 1105 192.168.0.21 00:50:04:f8:d7:08 UHLW 1 5988 xl0 1097 192.168.0.22 00:48:45:40:8e:43 UHLW 0 1592 xl0 991 192.168.0.23 00:10:5a:f2:10:d2 UHLW 1 212 xl0 1167 192.168.0.24 00:c0:26:b0:73:d6 UHLW 0 605 xl0 975 192.168.0.25 00:50:04:ed:2f:7c UHLW 1 5297 xl0 917 192.168.0.26 00:48:45:40:9e:e2 UHLW 0 8 xl0 1005 192.168.0.29 00:48:45:40:76:8e UHLW 0 59 xl0 1021 192.168.0.32 00:c0:df:81:76:e6 UHLW 0 16 xl0 192.168.0.35 00:50:04:f8:d6:bc UHLW 0 1465 xl0 1002 192.168.0.36 00:48:45:40:68:8d UHLW 0 32 xl0 1006 192.168.0.200 link#1 UHLW 1 66 xl0 192.168.0.201 00:06:5b:2f:0b:a5 UHLW 1 361 xl0 1107 192.168.0.210 00:e0:98:71:98:52 UHLW 0 8 xl0 669 192.168.0.255 ff:ff:ff:ff:ff:ff UHLWb 2 201 xl0 212.253.32.254 212.253.32.222 UH 8 0 tun0 [ozlerplastik] /home/ertank# --=_0_6037_1025682240 Content-Disposition: attachment; filename="netstat2.out" Content-Type: text/plain; charset="iso-8859-1"; name="netstat2.out" Content-Transfer-Encoding: 7bit [ozlerplastik] /home/ertank# netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 127.0.0.1 127.0.0.1 UH 2 13191 lo0 192.168.0 link#1 UC 19 0 xl0 192.168.0.2 00:04:ac:de:f2:b5 UHLW 1 80 xl0 1129 192.168.0.11 00:80:48:fb:5b:5f UHLW 0 4069 xl0 307 192.168.0.15 00:10:5a:66:fe:5f UHLW 0 1292 xl0 1125 192.168.0.16 00:01:02:c2:95:7f UHLW 0 4822 xl0 918 192.168.0.20 00:08:02:16:d9:0e UHLW 40 57988 xl0 1185 192.168.0.21 00:50:04:f8:d7:08 UHLW 1 5987 xl0 1177 192.168.0.22 00:48:45:40:8e:43 UHLW 0 1592 xl0 1071 192.168.0.23 00:10:5a:f2:10:d2 UHLW 1 210 xl0 1036 192.168.0.24 00:c0:26:b0:73:d6 UHLW 1 602 xl0 1055 192.168.0.25 00:50:04:ed:2f:7c UHLW 1 5296 xl0 997 192.168.0.26 00:48:45:40:9e:e2 UHLW 0 8 xl0 1085 192.168.0.29 00:48:45:40:76:8e UHLW 0 59 xl0 1101 192.168.0.32 00:c0:df:81:76:e6 UHLW 0 16 xl0 25 192.168.0.35 00:50:04:f8:d6:bc UHLW 0 1465 xl0 1082 192.168.0.36 00:48:45:40:68:8d UHLW 0 32 xl0 1086 192.168.0.200 link#1 UHLW 1 66 xl0 192.168.0.201 00:06:5b:2f:0b:a5 UHLW 1 361 xl0 1187 192.168.0.210 00:e0:98:71:98:52 UHLW 0 8 xl0 749 192.168.0.255 ff:ff:ff:ff:ff:ff UHLWb 2 201 xl0 [ozlerplastik] /home/ertank# --=_0_6037_1025682240-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?courier.3D22AB40.00001B8F>