Date: Thu, 9 Jan 2003 10:29:30 -0500 From: Andrew Y Ng <ayn@AndrewNg.com> To: jeremy <jl_dodd@earthlink.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: help Message-ID: <20030109152930.GA24876@AndrewNg.com> In-Reply-To: <3E1DD5E3.E87B8055@earthlink.net> References: <3E1DD5E3.E87B8055@earthlink.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--9amGYk9869ThD9tj Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable i saw one problem at least, device ed requires device miibus and it was commented out. /ayn On 0, jeremy <jl_dodd@earthlink.net> wrote: >=20 > i am runing freebsd 4.5 and i can not compile my kernel i get "Stop in > /usr/src/sys/compile/MYKERNEL." >=20 > here is my kernel file >=20 >=20 > any help would be nice thanks jeremy > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # http://www.FreeBSD.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you a= re > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.37 2001/12/19 18:34:45 ie= dowse Exp $ >=20 > machine i386 > #cpu I386_CPU > #cpu I486_CPU > #cpu I586_CPU > cpu I686_CPU > ident GENERIC > maxusers 19 >=20 > #makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols >=20 > #options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options SOFTUPDATES #Enable FFS soft updates support > options UFS_DIRHASH #Improve performance on big directories > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root device, NFS required > options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI > options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev >=20 > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O >=20 > device isa > #device eisa > device pci >=20 > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > device fd1 at fdc0 drive 1 > # > # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, > # don't use the above line for fdc0 but the following one: > #device fdc0 >=20 > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering >=20 > # SCSI Controllers > #device ahb # EISA AHA1742 family > #device ahc # AHA2940 and onboard AIC7xxx devices > #device amd # AMD 53C974 (Tekram DC-390(T)) > #device isp # Qlogic family > #device ncr # NCR/Symbios Logic > #device sym # NCR/Symbios Logic (newer chipsets) > #options SYM_SETUP_LP_PROBE_MAP=3D0x40 > # Allow ncr to attach legacy NCR devices when=20 > # both sym and ncr are configured >=20 > #device adv0 at isa? > #device adw > #device bt0 at isa? > #device aha0 at isa? > #device aic0 at isa? >=20 > #device ncv # NCR 53C500 > #device nsp # Workbit Ninja SCSI-3 > #device stg # TMC 18C30/18C50 >=20 > # SCSI peripherals > #device scbus # SCSI bus (required) > #device da # Direct Access (disks) > #device sa # Sequential Access (tape etc) > #device cd # CD > #device pass # Passthrough device (direct SCSI access) >=20 > # RAID controllers interfaced to the SCSI subsystem > #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > #device dpt # DPT Smartcache - See LINT for options! > #device mly # Mylex AcceleRAID/eXtremeRAID >=20 > # RAID controllers > #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 > #device ida # Compaq Smart RAID > #device amr # AMI MegaRAID > #device mlx # Mylex DAC960 family > #device twe # 3ware Escalade >=20 > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 >=20 > device vga0 at isa? >=20 > # splash screen/screen saver > pseudo-device splash >=20 > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 >=20 > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? > #options XSERVER # support for X server on a vt console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT = lines > #options PCVT_SCANSET=3D2 # IBM keyboards are non-std >=20 > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 >=20 > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # Advanced Power Management >=20 > # PCCARD (PCMCIA) support > device card > device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable >=20 > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 >=20 > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da >=20 >=20 > # PCI Ethernet NICs. > #device de # DEC/Intel DC21x4x (``Tulip'') > #device txp # 3Com 3cR990 (``Typhoon'') > #device vx # 3Com 3c590, 3c595 (``Vortex'') >=20 > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these NI= Cs! > #device miibus # MII bus support > #device dc # DEC/Intel 21143 and various workalikes > #device fxp # Intel EtherExpress PRO/100B (82557, 82558) > #device pcn # AMD Am79C97x PCI 10/100 NICs > #device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 (``Starfire'') > #device sis # Silicon Integrated Systems SiS 900/SiS 7016 > #device ste # Sundance ST201 (D-Link DFE-550TX) > #device tl # Texas Instruments ThunderLAN > #device tx # SMC EtherPower II (83c170 ``EPIC'') > #device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device wx # Intel Gigabit Ethernet Card (``Wiseman'') > #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') >=20 > # ISA Ethernet NICs. > # 'device ed' requires 'device miibus' > device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > device ex > device ep > device fe0 at isa? port 0x300 > # Xircom Ethernet > device xe > # PRISM I IEEE 802.11b wireless NIC. > device awi > # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA attachment needed > # and resources will always be dynamically assigned by the pccard code. > device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP > # mode (the factory default). If you set the switches on your ISA > # card for a manually chosen I/O address and IRQ, you must specify > # those parameters here. > device an > # The probe order of these is presently determined by i386/isa/isa_compat= .c. > device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > device lnc0 at isa? port 0x280 irq 10 drq 0 > device cs0 at isa? port 0x300 > device sn0 at isa? port 0x300 irq 10 >=20 > # Pseudo devices - the number indicates how many units to allocate. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) >=20 > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter >=20 > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus and da > device ums # Mouse > device uscanner # Scanners > device urio # Diamond Rio MP3 Player > # USB Ethernet, requires mii > device aue # ADMtek USB ethernet > device cue # CATC USB ethernet > device kue # Kawasaki LSI USB ethernet > device pcm # > device sbc > device pcm0 at isa? irq 10 drq 1 flags 0x0 >=20 > options PNPBIOS >=20 --=20 andrew y ng <ayn@andrewng.com> http://andrewng.com gpg --keyserver pgp.mit.edu --recv-keys 9BFC594C fingerprint : 46a1 29ff 893a 0381 dc81 1e1e bed8 e882 9bfc 594c=20 --9amGYk9869ThD9tj Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAj4dlVoACgkQvtjogpv8WUwc/ACffOGyLLOz6Jv1IjM5KkwSSG6o lN4AoJF53X7JgrWdN564mPYmFr40JhZ4 =x9oJ -----END PGP SIGNATURE----- --9amGYk9869ThD9tj-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030109152930.GA24876>