Date: Fri, 08 Sep 2006 09:36:07 -0500 From: Kevin Kramer <kramer@centtech.com> To: freebsd-multimedia@freebsd.org Subject: RFC: snd_hda(4) -- Intel High Definition Audio driver Message-ID: <45017FD7.5090309@centtech.com>
next in thread | raw e-mail | index | archive | help
i have tinkered a bit with this and i'm getting very loud output. i've got the /us/sbin/mixer set to 0:0 using gzine with it's mixer/amplifier set to 0. if i move the gxine amplifier setting to 1.0 and the gxine volume to 1.0, i get what i would expect. but when i move the volume back to 0.0, it does not reduce. the volume changes do change the /usr/sbin/mixer settings as expected. now with the gxine volume still at 0.0, the default gxine amplifier setting was 100, now when i go to 10.0 it is too loud for my laptop. i was using the hacked hdac.ko driver prior to this and gxine worked fine. i almost blew my laptop (Latitude D820) speakers when the mixer was at 75:75 here is my info uname -a FreeBSD roddick.centtech.com 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun Jun 25 06:27:43 CDT 2006 root@:/usr/obj/usr/src/sys/RODDICK i386 pciconf -lv | grep -B 4 multimedia subclass = PCI-PCI pcm0@pci0:27:0: class=0x040300 card=0x01cc1028 chip=0x27d88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) High Definition Audio' class = multimedia sysctl hw.snd.verbose=2 ; cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <Intel 82801G High Definition Audio Controller> at memory 0xdfffc000 irq 21 kld snd_hda [20060907_002] (1p/1r/0v channels duplex default) [pcm0:play:0:dsp0.0]: spd 22050/48000, fmt 0x10000010, flags 0x00000000, 0x00000010 interrupts 0, underruns 0, ready 0 [b:16384/8192/2|bs:131072/2048/64] {userland} -> feeder_root(0x10000010) -> feeder_rate(22050 -> 48000) -> {hardware} [pcm0:record:0:dsp0.1]: spd 22050/48000, fmt 0x10000010, flags 0x00000000, 0x00000010 interrupts 0, overruns 0, hfree 16384, sfree 131072 [b:16384/8192/2|bs:131072/2048/64] {hardware} -> feeder_root(0x10000010) -> feeder_rate(48000 -> 22050) -> {userland} sysctl hw.snd hw.snd.report_soft_formats: 1 hw.snd.targetirqrate: 32 hw.snd.verbose: 2 hw.snd.maxautovchans: 0 hw.snd.unit: 0 hw.snd.pcm0.buffersize: 16384 hw.snd.pcm0.vchans: 0 /usr/sbin/mixer Mixer vol is currently set to 0:0 Mixer speaker is currently set to 0:0 Mixer mic is currently set to 0:0 Mixer rec is currently set to 0:0 Recording source: mic -- ------------------------------ Kevin Kramer Sr. Systems Administrator 512.418.5725 Centaur Technology, Inc. www.centtech.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45017FD7.5090309>