Date: Fri, 13 Feb 2015 14:33:16 +0200 From: george ember <sk8harddiefast@gmail.com> Cc: freebsd-acpi@freebsd.org Subject: Re: Laptop Battery drains insanely Fast! Message-ID: <CAJ7d6ndwpteeG1WKdpib0Lfrc3L5EL0--CtRKudzW2v2XDxagA@mail.gmail.com> In-Reply-To: <CAJ7d6nfPzuu4uyHON8ntbj=3e5C961aVtsDsL9QLpFDsWW3PKg@mail.gmail.com> References: <CAJ7d6nfh7DrUbFXoEV%2BzRObkEQn0dhuj8EQ8CfJtoKEfrZH=wg@mail.gmail.com> <20150212192344.P38620@sola.nimnet.asn.au> <CAJ7d6nempJR==-2_UdJYFTU1Q1DFz-%2Bh3m4NvRhwcPKLEj6h1Q@mail.gmail.com> <20150213014814.F38620@sola.nimnet.asn.au> <CAJ7d6nc302Ovc82R_ewwYY=0mMUpid2R7VchF2YTs_LxH0PhDA@mail.gmail.com> <CAJ7d6nesz8CD0pSDPw4Tre8wObSx1Ui4AKwW=%2BQi7U=5J9kOHw@mail.gmail.com> <20150213031631.X38620@sola.nimnet.asn.au> <CAJ7d6nd0HatUMZp43DSViwoN%2BKiMyy7R5LR6CtG_rzsTyrFmQA@mail.gmail.com> <CAJ7d6nfPzuu4uyHON8ntbj=3e5C961aVtsDsL9QLpFDsWW3PKg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Good Morning developers :D This is my exact *$ sudo acpiconf -i0* Design capacity: 45820 mWh Last full capacity: 42170 mWh Technology: secondary (rechargeable) Design voltage: 14400 mV Capacity (warn): 4210 mWh Capacity (low): 1263 mWh Low/warn granularity: 264 mWh Warn/full granularity: 3780 mWh Model number: PABAS0241231 Serial number: 41167 Type: Li-Ion OEM info: LENOVO State: discharging Remaining capacity: 83% Remaining time: 3:50 Present rate: 9200 mW Present voltage: 15437 mV $ And the new results of my *pcm.x 1* I upload it to pastebin because columns were not so nice visible here. http://pastebin.com/G4SMS7EC Also my TEMP seems wrong over there! *[ember@FreeBSD ~]$ sysctl -a | grep temperature* hw.acpi.thermal.tz0.temperature: 34.0C dev.cpu.0.temperature: 30.0C dev.cpu.1.temperature: 30.0C dev.cpu.2.temperature: 37.0C dev.cpu.3.temperature: 38.0C dev.cpu.4.temperature: 37.0C dev.cpu.5.temperature: 37.0C dev.cpu.6.temperature: 41.0C dev.cpu.7.temperature: 41.0C 2015-02-12 20:34 GMT+02:00 george ember <sk8harddiefast@gmail.com>: > This is my exact > > $ sudo acpiconf -i0 > Design capacity: 45820 mWh > Last full capacity: 42170 mWh > Technology: secondary (rechargeable) > Design voltage: 14400 mV > Capacity (warn): 4210 mWh > Capacity (low): 1263 mWh > Low/warn granularity: 264 mWh > Warn/full granularity: 3780 mWh > Model number: PABAS0241231 > Serial number: 41167 > Type: Li-Ion > OEM info: LENOVO > State: discharging > Remaining capacity: 83% > Remaining time: 3:50 > Present rate: 9200 mW > Present voltage: 15437 mV > $ > > And the new results of my *pcm.x 1* > Before run *pcm.x 1* I was compiling gnome. So I stop it to run the > command to be the cpu as idle as it can be. > > Temp I guess is a little hight because of compiling? Normal is at ~45C > > I upload it to pastebin because columns were not so nice visible here. > > http://pastebin.com/qKea1cRh > > > ------------------------------------------------------------------------------------------------------------------------------------------------------- > > 2015-02-12 18:45 GMT+02:00 george ember <sk8harddiefast@gmail.com>: > >> Ok. I have it! >> >> *$ tail -f test * >> Present voltage: 14329 mV >> Fri Feb 13 *18:32:34* EET 2015 dev.cpu.0.freq: 1200 >> 0.00% 0.00% 100.00% last 680us { 0.24 0.09 0.04 } >> 0.00% 0.00% 100.00% last 836us { LAPIC } >> hw.acpi.thermal.tz0.temperature: 44.0C >> State: discharging >> Remaining capacity: *43%* >> Remaining time: 1:43 >> Present rate: 10580 mW >> Present voltage: 14253 mV >> >> Fri Feb 13 *18:33:34 *EET 2015 dev.cpu.0.freq: 1200 >> 0.17% 0.09% 99.72% last 3048us { 0.09 0.07 0.03 } >> 0.07% 0.04% 99.87% last 686us { LAPIC } >> hw.acpi.thermal.tz0.temperature: 43.0C >> State: discharging >> Remaining capacity: *42%* >> Remaining time: 1:38 >> Present rate: 10950 mW >> Present voltage: 14175 mV >> >> Fri Feb 13 *18:34:34* EET 2015 dev.cpu.0.freq: 1200 >> 0.12% 0.11% 99.75% last 622us { 0.03 0.05 0.03 } >> 0.06% 0.04% 99.88% last 3592us { LAPIC } >> hw.acpi.thermal.tz0.temperature: 43.0C >> State: discharging >> Remaining capacity: * 42%* >> Remaining time: 1:40 >> Present rate: 10590 mW >> Present voltage: 14142 mV >> >> Fri Feb 13 *18:35:34* EET 2015 dev.cpu.0.freq: 1200 >> 0.10% 0.09% 99.79% last 6636us { 0.05 0.06 0.03 } >> 0.05% 0.04% 99.89% last 528us { LAPIC } >> hw.acpi.thermal.tz0.temperature: 43.0C >> State: discharging >> Remaining capacity: *41%* >> Remaining time: 1:39 >> Present rate: 10600 mW >> Present voltage: 14131 mV >> >> Drops Almost 1% per minute!!! >> >> Also my */var/log/messages* >> >> *$ more /var/log/messages* >> Feb 13 14:00:19 FreeBSD shutdown: power-down by ember: >> Feb 13 14:00:20 FreeBSD kernel: . >> Feb 13 14:00:20 FreeBSD syslogd: exiting on signal 15 >> Feb 13 15:26:21 FreeBSD syslogd: kernel boot file is /boot/kernel/kernel >> Feb 13 15:26:21 FreeBSD kernel: Copyright (c) 1992-2014 The FreeBSD >> Project. >> Feb 13 15:26:21 FreeBSD kernel: Copyright (c) 1979, 1980, 1983, 1986, >> 1988, 1989, 1991, 1992, 1993, 1994 >> Feb 13 15:26:21 FreeBSD kernel: The Regents of the University of >> California. All rights reserved. >> Feb 13 15:26:21 FreeBSD kernel: FreeBSD is a registered trademark of The >> FreeBSD Foundation. >> Feb 13 15:26:21 FreeBSD kernel: FreeBSD 10.1-RELEASE-p5 #0: Tue Jan 27 >> 08:55:07 UTC 2015 >> Feb 13 15:26:21 FreeBSD kernel: root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >> Feb 13 15:26:21 FreeBSD kernel: FreeBSD clang version 3.4.1 >> (tags/RELEASE_34/dot1-final 208032) 20140512 >> Feb 13 15:26:21 FreeBSD kernel: CPU: Intel(R) Core(TM) i7-3632QM CPU @ >> 2.20GHz (2195.06-MHz K8-class CPU) >> Feb 13 15:26:21 FreeBSD kernel: Origin = "GenuineIntel" Id = 0x306a9 >> Family = 0x6 Model = 0x3a Stepping = 9 >> Feb 13 15:26:21 FreeBSD kernel: >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Feb 13 15:26:21 FreeBSD kernel: >> Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> >> Feb 13 15:26:21 FreeBSD kernel: AMD >> Features=0x28100800<SYSCALL,NX,RDTSCP,LM> >> Feb 13 15:26:21 FreeBSD kernel: AMD Features2=0x1<LAHF> >> Feb 13 15:26:21 FreeBSD kernel: Structured Extended >> Features=0x281<FSGSBASE,SMEP,ERMS> >> Feb 13 15:26:21 FreeBSD kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> Feb 13 15:26:21 FreeBSD kernel: TSC: P-state invariant, performance >> statistics >> Feb 13 15:26:21 FreeBSD kernel: real memory = 8589934592 (8192 MB) >> Feb 13 15:26:21 FreeBSD kernel: avail memory = 8120750080 (7744 MB) >> Feb 13 15:26:21 FreeBSD kernel: Event timer "LAPIC" quality 600 >> Feb 13 15:26:21 FreeBSD kernel: ACPI APIC Table: <LENOVO CB-01 > >> Feb 13 15:26:21 FreeBSD kernel: FreeBSD/SMP: Multiprocessor System >> Detected: 8 CPUs >> Feb 13 15:26:21 FreeBSD kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 >> SMT threads >> Feb 13 15:26:21 FreeBSD kernel: cpu0 (BSP): APIC ID: 0 >> Feb 13 15:26:21 FreeBSD kernel: cpu1 (AP): APIC ID: 1 >> Feb 13 15:26:21 FreeBSD kernel: cpu2 (AP): APIC ID: 2 >> Feb 13 15:26:21 FreeBSD kernel: cpu3 (AP): APIC ID: 3 >> Feb 13 15:26:21 FreeBSD kernel: cpu4 (AP): APIC ID: 4 >> Feb 13 15:26:21 FreeBSD kernel: cpu5 (AP): APIC ID: 5 >> Feb 13 15:26:21 FreeBSD kernel: cpu6 (AP): APIC ID: 6 >> Feb 13 15:26:21 FreeBSD kernel: cpu7 (AP): APIC ID: 7 >> Feb 13 15:26:21 FreeBSD kernel: ioapic0 <Version 2.0> irqs 0-23 on >> motherboard >> Feb 13 15:26:21 FreeBSD kernel: kbd1 at kbdmux0 >> Feb 13 15:26:21 FreeBSD kernel: random: <Software, Yarrow> initialized >> Feb 13 15:26:21 FreeBSD kernel: acpi0: <LENOVO CB-01> on motherboard >> Feb 13 15:26:21 FreeBSD kernel: acpi0: Power Button (fixed) >> Feb 13 15:26:21 FreeBSD kernel: cpu0: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu1: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu2: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu3: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu4: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu5: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu6: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: cpu7: <ACPI CPU> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: hpet0: <High Precision Event Timer> iomem >> 0xfed00000-0xfed003ff on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: Timecounter "HPET" frequency 14318180 Hz >> quality 950 >> Feb 13 15:26:21 FreeBSD kernel: Event timer "HPET" frequency 14318180 Hz >> quality 550 >> Feb 13 15:26:21 FreeBSD kernel: atrtc0: <AT realtime clock> port >> 0x70-0x77 irq 8 on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: atrtc0: Warning: Couldn't map I/O. >> Feb 13 15:26:21 FreeBSD kernel: Event timer "RTC" frequency 32768 Hz >> quality 0 >> Feb 13 15:26:21 FreeBSD kernel: attimer0: <AT timer> port >> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: Timecounter "i8254" frequency 1193182 Hz >> quality 0 >> Feb 13 15:26:21 FreeBSD kernel: Event timer "i8254" frequency 1193182 Hz >> quality 100 >> Feb 13 15:26:21 FreeBSD kernel: Timecounter "ACPI-fast" frequency 3579545 >> Hz quality 900 >> Feb 13 15:26:21 FreeBSD kernel: acpi_timer0: <24-bit timer at >> 3.579545MHz> port 0x408-0x40b on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: acpi_ec0: <Embedded Controller: GPE 0x17> >> port 0x62,0x66 on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: pcib0: <ACPI Host-PCI bridge> port >> 0xcf8-0xcff on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: pci0: <ACPI PCI bus> on pcib0 >> Feb 13 15:26:21 FreeBSD kernel: vgapci0: <VGA-compatible display> port >> 0x3000-0x303f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at >> device 2.0 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: agp0: <IvyBridge mobile GT2 IG> on vgapci0 >> Feb 13 15:26:21 FreeBSD kernel: agp0: aperture size is 256M, detected >> 65532k stolen memory >> Feb 13 15:26:21 FreeBSD kernel: vgapci0: Boot video device >> Feb 13 15:26:21 FreeBSD kernel: xhci0: <Intel Panther Point USB 3.0 >> controller> mem 0xd0600000-0xd060ffff at device 20.0 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: usbus0: waiting for BIOS to give up >> control >> Feb 13 15:26:21 FreeBSD kernel: xhci0: 32 byte context size. >> Feb 13 15:26:21 FreeBSD kernel: xhci0: Port routing mask set to 0xffffffff >> Feb 13 15:26:21 FreeBSD kernel: usbus0 on xhci0 >> Feb 13 15:26:21 FreeBSD kernel: pci0: <simple comms> at device 22.0 (no >> driver attached) >> Feb 13 15:26:21 FreeBSD kernel: ehci0: <Intel Panther Point USB 2.0 >> controller> mem 0xd0619000-0xd06193ff irq 16 at device 26.0 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: usbus1: waiting for BIOS to give up >> control >> Feb 13 15:26:21 FreeBSD kernel: usbus1: timed out waiting for BIOS >> Feb 13 15:26:21 FreeBSD kernel: usbus1: EHCI version 1.0 >> Feb 13 15:26:21 FreeBSD kernel: usbus1 on ehci0 >> Feb 13 15:26:21 FreeBSD kernel: hdac0: <Intel Panther Point HDA >> Controller> mem 0xd0610000-0xd0613fff irq 22 at device 27.0 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: pcib1: <ACPI PCI-PCI bridge> irq 17 at >> device 28.0 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: pci1: <ACPI PCI bus> on pcib1 >> Feb 13 15:26:21 FreeBSD kernel: re0: <RealTek 810xE PCIe 10/100baseTX> >> port 0x2000-0x20ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 16 >> at device 0.0 on pci1 >> Feb 13 15:26:21 FreeBSD kernel: re0: Using 1 MSI-X message >> Feb 13 15:26:21 FreeBSD kernel: re0: ASPM disabled >> Feb 13 15:26:21 FreeBSD kernel: re0: Chip rev. 0x40800000 >> Feb 13 15:26:21 FreeBSD kernel: re0: MAC rev. 0x00400000 >> Feb 13 15:26:21 FreeBSD kernel: miibus0: <MII bus> on re0 >> Feb 13 15:26:21 FreeBSD kernel: rlphy0: <RTL8201E 10/100 media interface> >> PHY 1 on miibus0 >> Feb 13 15:26:21 FreeBSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, >> 100baseTX-FDX, auto, auto-flow >> Feb 13 15:26:21 FreeBSD kernel: re0: Ethernet address: 20:89:84:36:3b:36 >> Feb 13 15:26:21 FreeBSD kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at >> device 28.1 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: pci2: <ACPI PCI bus> on pcib2 >> Feb 13 15:26:21 FreeBSD kernel: iwn0: <Intel Centrino Wireless-N 2230> >> mem 0xd0500000-0xd0501fff irq 17 at device 0.0 on pci2 >> Feb 13 15:26:21 FreeBSD kernel: iwn0: adapter type 12 not supported >> Feb 13 15:26:21 FreeBSD kernel: iwn0: could not attach device, error 45 >> Feb 13 15:26:21 FreeBSD kernel: device_attach: iwn0 attach returned 45 >> Feb 13 15:26:21 FreeBSD kernel: ehci1: <Intel Panther Point USB 2.0 >> controller> mem 0xd0618000-0xd06183ff irq 23 at device 29.0 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: usbus2: waiting for BIOS to give up >> control >> Feb 13 15:26:21 FreeBSD kernel: usbus2: timed out waiting for BIOS >> Feb 13 15:26:21 FreeBSD kernel: usbus2: EHCI version 1.0 >> Feb 13 15:26:21 FreeBSD kernel: usbus2 on ehci1 >> Feb 13 15:26:21 FreeBSD kernel: isab0: <PCI-ISA bridge> at device 31.0 on >> pci0 >> Feb 13 15:26:21 FreeBSD kernel: isa0: <ISA bus> on isab0 >> Feb 13 15:26:21 FreeBSD kernel: ahci0: <Intel Panther Point AHCI SATA >> controller> port >> 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem >> 0xd0617000-0xd06177ff irq 19 at device 31.2 on pci0 >> Feb 13 15:26:21 FreeBSD kernel: ahci0: AHCI v1.30 with 6 6Gbps ports, >> Port Multiplier not supported >> Feb 13 15:26:21 FreeBSD kernel: ahcich1: <AHCI channel> at channel 1 on >> ahci0 >> Feb 13 15:26:21 FreeBSD kernel: ahcich2: <AHCI channel> at channel 2 on >> ahci0 >> Feb 13 15:26:21 FreeBSD kernel: ahciem0: <AHCI enclosure management >> bridge> on ahci0 >> Feb 13 15:26:21 FreeBSD kernel: acpi_lid0: <Control Method Lid Switch> on >> acpi0 >> Feb 13 15:26:21 FreeBSD kernel: acpi_tz0: <Thermal Zone> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: acpi_button0: <Power Button> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: atkbdc0: <Keyboard controller (i8042)> >> port 0x60,0x64 irq 1 on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> Feb 13 15:26:21 FreeBSD kernel: kbd0 at atkbd0 >> Feb 13 15:26:21 FreeBSD kernel: atkbd0: [GIANT-LOCKED] >> Feb 13 15:26:21 FreeBSD kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> Feb 13 15:26:21 FreeBSD kernel: psm0: [GIANT-LOCKED] >> Feb 13 15:26:21 FreeBSD kernel: psm0: model Generic PS/2 mouse, device ID >> 0 >> Feb 13 15:26:21 FreeBSD kernel: battery0: <ACPI Control Method Battery> >> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: acpi_acad0: <AC Adapter> on acpi0 >> Feb 13 15:26:21 FreeBSD kernel: orm0: <ISA Option ROM> at iomem >> 0xc0000-0xcefff on isa0 >> Feb 13 15:26:21 FreeBSD kernel: sc0: <System console> at flags 0x100 on >> isa0 >> Feb 13 15:26:21 FreeBSD kernel: sc0: VGA <16 virtual consoles, >> flags=0x300> >> Feb 13 15:26:21 FreeBSD kernel: vga0: <Generic ISA VGA> at port >> 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> Feb 13 15:26:21 FreeBSD kernel: ppc0: cannot reserve I/O port range >> Feb 13 15:26:21 FreeBSD kernel: est0: <Enhanced SpeedStep Frequency >> Control> on cpu0 >> Feb 13 15:26:21 FreeBSD kernel: est1: <Enhanced SpeedStep Frequency >> Control> on cpu1 >> Feb 13 15:26:21 FreeBSD kernel: est2: <Enhanced SpeedStep Frequency >> Control> on cpu2 >> Feb 13 15:26:21 FreeBSD kernel: est3: <Enhanced SpeedStep Frequency >> Control> on cpu3 >> Feb 13 15:26:21 FreeBSD kernel: est4: <Enhanced SpeedStep Frequency >> Control> on cpu4 >> Feb 13 15:26:21 FreeBSD kernel: est5: <Enhanced SpeedStep Frequency >> Control> on cpu5 >> Feb 13 15:26:21 FreeBSD kernel: est6: <Enhanced SpeedStep Frequency >> Control> on cpu6 >> Feb 13 15:26:21 FreeBSD kernel: est7: <Enhanced SpeedStep Frequency >> Control> on cpu7 >> Feb 13 15:26:21 FreeBSD kernel: Timecounters tick every 1.000 msec >> Feb 13 15:26:21 FreeBSD kernel: hdacc0: <Realtek ALC269 HDA CODEC> at cad >> 0 on hdac0 >> Feb 13 15:26:21 FreeBSD kernel: hdaa0: <Realtek ALC269 Audio Function >> Group> at nid 1 on hdacc0 >> Feb 13 15:26:21 FreeBSD kernel: pcm0: <Realtek ALC269 (Analog >> 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 >> Feb 13 15:26:21 FreeBSD kernel: pcm1: <Realtek ALC269 (Internal Analog >> Mic)> at nid 18 on hdaa0 >> Feb 13 15:26:21 FreeBSD kernel: hdacc1: <Intel Panther Point HDA CODEC> >> at cad 3 on hdac0 >> Feb 13 15:26:21 FreeBSD kernel: hdaa1: <Intel Panther Point Audio >> Function Group> at nid 1 on hdacc1 >> Feb 13 15:26:21 FreeBSD kernel: pcm2: <Intel Panther Point (HDMI/DP 8ch)> >> at nid 5 on hdaa1 >> Feb 13 15:26:21 FreeBSD kernel: random: unblocking device. >> Feb 13 15:26:21 FreeBSD kernel: usbus0: 5.0Gbps Super Speed USB v3.0 >> Feb 13 15:26:21 FreeBSD kernel: usbus1: 480Mbps High Speed USB v2.0 >> Feb 13 15:26:21 FreeBSD kernel: usbus2: 480Mbps High Speed USB v2.0 >> Feb 13 15:26:21 FreeBSD kernel: ugen1.1: <Intel> at usbus1 >> Feb 13 15:26:21 FreeBSD kernel: uhub0: <Intel EHCI root HUB, class 9/0, >> rev 2.00/1.00, addr 1> on usbus1 >> Feb 13 15:26:21 FreeBSD kernel: ugen0.1: <0x8086> at usbus0 >> Feb 13 15:26:21 FreeBSD kernel: uhub1: <0x8086 XHCI root HUB, class 9/0, >> rev 3.00/1.00, addr 1> on usbus0 >> Feb 13 15:26:21 FreeBSD kernel: ugen2.1: <Intel> at usbus2 >> Feb 13 15:26:21 FreeBSD kernel: uhub2: <Intel EHCI root HUB, class 9/0, >> rev 2.00/1.00, addr 1> on usbus2 >> Feb 13 15:26:21 FreeBSD kernel: ada0 at ahcich1 bus 0 scbus0 target 0 lun >> 0 >> Feb 13 15:26:21 FreeBSD kernel: ada0: <ADATA SP900 5.6.0> ATA-8 SATA 3.x >> device >> Feb 13 15:26:21 FreeBSD kernel: ada0: Serial Number 7E3620002080 >> Feb 13 15:26:21 FreeBSD kernel: ada0: 600.000MB/s transfers (SATA 3.x, >> UDMA6, PIO 512bytes) >> Feb 13 15:26:21 FreeBSD kernel: ada0: Command Queueing enabled >> Feb 13 15:26:21 FreeBSD kernel: ada0: 122104MB (250069680 512 byte >> sectors: 16H 63S/T 16383C) >> Feb 13 15:26:21 FreeBSD kernel: ada0: Previously was known as ad4 >> Feb 13 15:26:21 FreeBSD kernel: ses0 at ahciem0 bus 0 scbus2 target 0 lun >> 0 >> Feb 13 15:26:21 FreeBSD kernel: ses0: <AHCI SGPIO Enclosure 1.00 0001> >> SEMB S-E-S 2.00 device >> Feb 13 15:26:21 FreeBSD kernel: ses0: SEMB SES Device >> Feb 13 15:26:21 FreeBSD kernel: cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 >> Feb 13 15:26:21 FreeBSD kernel: cd0: <HL-DT-ST DVDRAM GU70N DE01> >> Removable CD-ROM SCSI-0 device >> Feb 13 15:26:21 FreeBSD kernel: cd0: Serial Number M45CATB0842 >> Feb 13 15:26:21 FreeBSD kernel: cd0: 150.000MB/s transfers (SATA 1.x, >> UDMA6, ATAPI 12bytes, PIO 8192bytes) >> Feb 13 15:26:21 FreeBSD kernel: cd0: Attempt to query device size failed: >> NOT READY, Medium not present - tray closed >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #1 Launched! >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #5 Launched! >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #7 Launched! >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #4 Launched! >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #6 Launched! >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #3 Launched! >> Feb 13 15:26:21 FreeBSD kernel: SMP: AP CPU #2 Launched! >> Feb 13 15:26:21 FreeBSD kernel: Timecounter "TSC-low" frequency >> 1097531758 Hz quality 1000 >> Feb 13 15:26:21 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 15:26:21 FreeBSD kernel: uhub1: 8 ports with 8 removable, self >> powered >> Feb 13 15:26:21 FreeBSD kernel: uhub0: 2 ports with 2 removable, self >> powered >> Feb 13 15:26:21 FreeBSD kernel: uhub2: 2 ports with 2 removable, self >> powered >> Feb 13 15:26:21 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 15:26:21 FreeBSD kernel: ugen2.2: <vendor 0x8087> at usbus2 >> Feb 13 15:26:21 FreeBSD kernel: uhub3: <vendor 0x8087 product 0x0024, >> class 9/0, rev 2.00/0.00, addr 2> on usbus2 >> Feb 13 15:26:21 FreeBSD kernel: ugen1.2: <vendor 0x8087> at usbus1 >> Feb 13 15:26:21 FreeBSD kernel: uhub4: <vendor 0x8087 product 0x0024, >> class 9/0, rev 2.00/0.00, addr 2> on usbus1 >> Feb 13 15:26:21 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 15:26:21 FreeBSD kernel: usbd_setup_device_desc: getting device >> descriptor at addr 1 failed, USB_ERR_TIMEOUT >> Feb 13 15:26:21 FreeBSD kernel: uhub3: 6 ports with 6 removable, self >> powered >> Feb 13 15:26:21 FreeBSD kernel: uhub4: 6 ports with 6 removable, self >> powered >> Feb 13 15:26:21 FreeBSD kernel: ugen1.3: <vendor 0x8087> at usbus1 >> Feb 13 15:26:21 FreeBSD kernel: usb_alloc_device: Failure selecting >> configuration index 0:USB_ERR_IOERROR, port 2, addr 1 (ignored) >> Feb 13 15:26:21 FreeBSD kernel: ugen0.2: <vendor 0x06cb> at usbus0 >> Feb 13 15:26:21 FreeBSD kernel: Root mount waiting for: usbus1 usbus0 >> Feb 13 15:26:21 FreeBSD kernel: ugen1.4: <Generic> at usbus1 >> Feb 13 15:26:21 FreeBSD kernel: ugen0.3: <Vimicro Corp.> at usbus0 >> Feb 13 15:26:21 FreeBSD kernel: Trying to mount root from >> ufs:/dev/gpt/ssdrootfs [rw]... >> Feb 13 15:26:21 FreeBSD kernel: ubt0: <vendor 0x8087 product 0x07da, >> class 224/1, rev 2.00/78.69, addr 3> on usbus1 >> Feb 13 15:26:21 FreeBSD kernel: WARNING: attempt to domain_add(bluetooth) >> after domainfinalize() >> Feb 13 15:26:21 FreeBSD kernel: WARNING: attempt to domain_add(netgraph) >> after domainfinalize() >> Feb 13 15:26:22 FreeBSD ntpd[615]: ntpd 4.2.4p5-a (1) >> Feb 13 15:26:29 FreeBSD ntpd[616]: time correction of -86383 seconds >> exceeds sanity limit (1000); set clock manually to the correct UTC time. >> Feb 13 15:27:47 FreeBSD reboot: rebooted by ember >> Feb 13 15:27:47 FreeBSD syslogd: exiting on signal 15 >> Feb 13 15:28:47 FreeBSD syslogd: kernel boot file is /boot/kernel/kernel >> Feb 13 15:28:47 FreeBSD kernel: Waiting (max 60 seconds) for system >> process `vnlru' to stop...done >> Feb 13 15:28:47 FreeBSD kernel: Waiting (max 60 seconds) for system >> process `syncer' to stop... >> Feb 13 15:28:47 FreeBSD kernel: Syncing disks, vnodes remaining...3 1 1 1 >> 1 0 0 done >> Feb 13 15:28:47 FreeBSD kernel: Waiting (max 60 seconds) for system >> process `bufdaemon' to stop...done >> Feb 13 15:28:47 FreeBSD kernel: All buffers synced. >> Feb 13 15:28:47 FreeBSD kernel: Uptime: 1m48s >> Feb 13 15:28:47 FreeBSD kernel: Copyright (c) 1992-2014 The FreeBSD >> Project. >> Feb 13 15:28:47 FreeBSD kernel: Copyright (c) 1979, 1980, 1983, 1986, >> 1988, 1989, 1991, 1992, 1993, 1994 >> Feb 13 15:28:47 FreeBSD kernel: The Regents of the University of >> California. All rights reserved. >> Feb 13 15:28:47 FreeBSD kernel: FreeBSD is a registered trademark of The >> FreeBSD Foundation. >> Feb 13 15:28:47 FreeBSD kernel: FreeBSD 10.1-RELEASE-p5 #0: Tue Jan 27 >> 08:55:07 UTC 2015 >> Feb 13 15:28:47 FreeBSD kernel: root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >> Feb 13 15:28:47 FreeBSD kernel: FreeBSD clang version 3.4.1 >> (tags/RELEASE_34/dot1-final 208032) 20140512 >> Feb 13 15:28:47 FreeBSD kernel: CPU: Intel(R) Core(TM) i7-3632QM CPU @ >> 2.20GHz (2195.06-MHz K8-class CPU) >> Feb 13 15:28:47 FreeBSD kernel: Origin = "GenuineIntel" Id = 0x306a9 >> Family = 0x6 Model = 0x3a Stepping = 9 >> Feb 13 15:28:47 FreeBSD kernel: >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Feb 13 15:28:47 FreeBSD kernel: >> Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> >> Feb 13 15:28:47 FreeBSD kernel: AMD >> Features=0x28100800<SYSCALL,NX,RDTSCP,LM> >> Feb 13 15:28:47 FreeBSD kernel: AMD Features2=0x1<LAHF> >> Feb 13 15:28:47 FreeBSD kernel: Structured Extended >> Features=0x281<FSGSBASE,SMEP,ERMS> >> Feb 13 15:28:47 FreeBSD kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> Feb 13 15:28:47 FreeBSD kernel: TSC: P-state invariant, performance >> statistics >> Feb 13 15:28:47 FreeBSD kernel: real memory = 8589934592 (8192 MB) >> Feb 13 15:28:47 FreeBSD kernel: avail memory = 8120750080 (7744 MB) >> Feb 13 15:28:47 FreeBSD kernel: Event timer "LAPIC" quality 600 >> Feb 13 15:28:47 FreeBSD kernel: ACPI APIC Table: <LENOVO CB-01 > >> Feb 13 15:28:47 FreeBSD kernel: FreeBSD/SMP: Multiprocessor System >> Detected: 8 CPUs >> Feb 13 15:28:47 FreeBSD kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 >> SMT threads >> Feb 13 15:28:47 FreeBSD kernel: cpu0 (BSP): APIC ID: 0 >> Feb 13 15:28:47 FreeBSD kernel: cpu1 (AP): APIC ID: 1 >> Feb 13 15:28:47 FreeBSD kernel: cpu2 (AP): APIC ID: 2 >> Feb 13 15:28:47 FreeBSD kernel: cpu3 (AP): APIC ID: 3 >> Feb 13 15:28:47 FreeBSD kernel: cpu4 (AP): APIC ID: 4 >> Feb 13 15:28:47 FreeBSD kernel: cpu5 (AP): APIC ID: 5 >> Feb 13 15:28:47 FreeBSD kernel: cpu6 (AP): APIC ID: 6 >> Feb 13 15:28:47 FreeBSD kernel: cpu7 (AP): APIC ID: 7 >> Feb 13 15:28:47 FreeBSD kernel: ioapic0 <Version 2.0> irqs 0-23 on >> motherboard >> Feb 13 15:28:47 FreeBSD kernel: kbd1 at kbdmux0 >> Feb 13 15:28:47 FreeBSD kernel: random: <Software, Yarrow> initialized >> Feb 13 15:28:47 FreeBSD kernel: acpi0: <LENOVO CB-01> on motherboard >> Feb 13 15:28:47 FreeBSD kernel: acpi0: Power Button (fixed) >> Feb 13 15:28:47 FreeBSD kernel: cpu0: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu1: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu2: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu3: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu4: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu5: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu6: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: cpu7: <ACPI CPU> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: hpet0: <High Precision Event Timer> iomem >> 0xfed00000-0xfed003ff on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: Timecounter "HPET" frequency 14318180 Hz >> quality 950 >> Feb 13 15:28:47 FreeBSD kernel: Event timer "HPET" frequency 14318180 Hz >> quality 550 >> Feb 13 15:28:47 FreeBSD kernel: atrtc0: <AT realtime clock> port >> 0x70-0x77 irq 8 on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: atrtc0: Warning: Couldn't map I/O. >> Feb 13 15:28:47 FreeBSD kernel: Event timer "RTC" frequency 32768 Hz >> quality 0 >> Feb 13 15:28:47 FreeBSD kernel: attimer0: <AT timer> port >> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: Timecounter "i8254" frequency 1193182 Hz >> quality 0 >> Feb 13 15:28:47 FreeBSD kernel: Event timer "i8254" frequency 1193182 Hz >> quality 100 >> Feb 13 15:28:47 FreeBSD kernel: Timecounter "ACPI-fast" frequency 3579545 >> Hz quality 900 >> Feb 13 15:28:47 FreeBSD kernel: acpi_timer0: <24-bit timer at >> 3.579545MHz> port 0x408-0x40b on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: acpi_ec0: <Embedded Controller: GPE 0x17> >> port 0x62,0x66 on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: pcib0: <ACPI Host-PCI bridge> port >> 0xcf8-0xcff on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: pci0: <ACPI PCI bus> on pcib0 >> Feb 13 15:28:47 FreeBSD kernel: vgapci0: <VGA-compatible display> port >> 0x3000-0x303f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at >> device 2.0 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: agp0: <IvyBridge mobile GT2 IG> on vgapci0 >> Feb 13 15:28:47 FreeBSD kernel: agp0: aperture size is 256M, detected >> 65532k stolen memory >> Feb 13 15:28:47 FreeBSD kernel: vgapci0: Boot video device >> Feb 13 15:28:47 FreeBSD kernel: xhci0: <Intel Panther Point USB 3.0 >> controller> mem 0xd0600000-0xd060ffff at device 20.0 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: usbus0: waiting for BIOS to give up >> control >> Feb 13 15:28:47 FreeBSD kernel: xhci0: 32 byte context size. >> Feb 13 15:28:47 FreeBSD kernel: xhci0: Port routing mask set to 0xffffffff >> Feb 13 15:28:47 FreeBSD kernel: usbus0 on xhci0 >> Feb 13 15:28:47 FreeBSD kernel: pci0: <simple comms> at device 22.0 (no >> driver attached) >> Feb 13 15:28:47 FreeBSD kernel: ehci0: <Intel Panther Point USB 2.0 >> controller> mem 0xd0619000-0xd06193ff irq 16 at device 26.0 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: usbus1: waiting for BIOS to give up >> control >> Feb 13 15:28:47 FreeBSD kernel: usbus1: timed out waiting for BIOS >> Feb 13 15:28:47 FreeBSD kernel: usbus1: EHCI version 1.0 >> Feb 13 15:28:47 FreeBSD kernel: usbus1 on ehci0 >> Feb 13 15:28:47 FreeBSD kernel: hdac0: <Intel Panther Point HDA >> Controller> mem 0xd0610000-0xd0613fff irq 22 at device 27.0 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: pcib1: <ACPI PCI-PCI bridge> irq 17 at >> device 28.0 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: pci1: <ACPI PCI bus> on pcib1 >> Feb 13 15:28:47 FreeBSD kernel: re0: <RealTek 810xE PCIe 10/100baseTX> >> port 0x2000-0x20ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 16 >> at device 0.0 on pci1 >> Feb 13 15:28:47 FreeBSD kernel: re0: Using 1 MSI-X message >> Feb 13 15:28:47 FreeBSD kernel: re0: ASPM disabled >> Feb 13 15:28:47 FreeBSD kernel: re0: Chip rev. 0x40800000 >> Feb 13 15:28:47 FreeBSD kernel: re0: MAC rev. 0x00400000 >> Feb 13 15:28:47 FreeBSD kernel: miibus0: <MII bus> on re0 >> Feb 13 15:28:47 FreeBSD kernel: rlphy0: <RTL8201E 10/100 media interface> >> PHY 1 on miibus0 >> Feb 13 15:28:47 FreeBSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, >> 100baseTX-FDX, auto, auto-flow >> Feb 13 15:28:47 FreeBSD kernel: re0: Ethernet address: 20:89:84:36:3b:36 >> Feb 13 15:28:47 FreeBSD kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at >> device 28.1 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: pci2: <ACPI PCI bus> on pcib2 >> Feb 13 15:28:47 FreeBSD kernel: iwn0: <Intel Centrino Wireless-N 2230> >> mem 0xd0500000-0xd0501fff irq 17 at device 0.0 on pci2 >> Feb 13 15:28:47 FreeBSD kernel: iwn0: adapter type 12 not supported >> Feb 13 15:28:47 FreeBSD kernel: iwn0: could not attach device, error 45 >> Feb 13 15:28:47 FreeBSD kernel: device_attach: iwn0 attach returned 45 >> Feb 13 15:28:47 FreeBSD kernel: ehci1: <Intel Panther Point USB 2.0 >> controller> mem 0xd0618000-0xd06183ff irq 23 at device 29.0 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: usbus2: waiting for BIOS to give up >> control >> Feb 13 15:28:47 FreeBSD kernel: usbus2: timed out waiting for BIOS >> Feb 13 15:28:47 FreeBSD kernel: usbus2: EHCI version 1.0 >> Feb 13 15:28:47 FreeBSD kernel: usbus2 on ehci1 >> Feb 13 15:28:47 FreeBSD kernel: isab0: <PCI-ISA bridge> at device 31.0 on >> pci0 >> Feb 13 15:28:47 FreeBSD kernel: isa0: <ISA bus> on isab0 >> Feb 13 15:28:47 FreeBSD kernel: ahci0: <Intel Panther Point AHCI SATA >> controller> port >> 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem >> 0xd0617000-0xd06177ff irq 19 at device 31.2 on pci0 >> Feb 13 15:28:47 FreeBSD kernel: ahci0: AHCI v1.30 with 6 6Gbps ports, >> Port Multiplier not supported >> Feb 13 15:28:47 FreeBSD kernel: ahcich1: <AHCI channel> at channel 1 on >> ahci0 >> Feb 13 15:28:47 FreeBSD kernel: ahcich2: <AHCI channel> at channel 2 on >> ahci0 >> Feb 13 15:28:47 FreeBSD kernel: ahciem0: <AHCI enclosure management >> bridge> on ahci0 >> Feb 13 15:28:47 FreeBSD kernel: acpi_lid0: <Control Method Lid Switch> on >> acpi0 >> Feb 13 15:28:47 FreeBSD kernel: acpi_tz0: <Thermal Zone> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: acpi_button0: <Power Button> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: atkbdc0: <Keyboard controller (i8042)> >> port 0x60,0x64 irq 1 on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> Feb 13 15:28:47 FreeBSD kernel: kbd0 at atkbd0 >> Feb 13 15:28:47 FreeBSD kernel: atkbd0: [GIANT-LOCKED] >> Feb 13 15:28:47 FreeBSD kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> Feb 13 15:28:47 FreeBSD kernel: psm0: [GIANT-LOCKED] >> Feb 13 15:28:47 FreeBSD kernel: psm0: model Generic PS/2 mouse, device ID >> 0 >> Feb 13 15:28:47 FreeBSD kernel: battery0: <ACPI Control Method Battery> >> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: acpi_acad0: <AC Adapter> on acpi0 >> Feb 13 15:28:47 FreeBSD kernel: orm0: <ISA Option ROM> at iomem >> 0xc0000-0xcefff on isa0 >> Feb 13 15:28:47 FreeBSD kernel: sc0: <System console> at flags 0x100 on >> isa0 >> Feb 13 15:28:47 FreeBSD kernel: sc0: VGA <16 virtual consoles, >> flags=0x300> >> Feb 13 15:28:47 FreeBSD kernel: vga0: <Generic ISA VGA> at port >> 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> Feb 13 15:28:47 FreeBSD kernel: ppc0: cannot reserve I/O port range >> Feb 13 15:28:47 FreeBSD kernel: est0: <Enhanced SpeedStep Frequency >> Control> on cpu0 >> Feb 13 15:28:47 FreeBSD kernel: est1: <Enhanced SpeedStep Frequency >> Control> on cpu1 >> Feb 13 15:28:47 FreeBSD kernel: est2: <Enhanced SpeedStep Frequency >> Control> on cpu2 >> Feb 13 15:28:47 FreeBSD kernel: est3: <Enhanced SpeedStep Frequency >> Control> on cpu3 >> Feb 13 15:28:47 FreeBSD kernel: est4: <Enhanced SpeedStep Frequency >> Control> on cpu4 >> Feb 13 15:28:47 FreeBSD kernel: est5: <Enhanced SpeedStep Frequency >> Control> on cpu5 >> Feb 13 15:28:47 FreeBSD kernel: est6: <Enhanced SpeedStep Frequency >> Control> on cpu6 >> Feb 13 15:28:47 FreeBSD kernel: est7: <Enhanced SpeedStep Frequency >> Control> on cpu7 >> Feb 13 15:28:47 FreeBSD kernel: random: unblocking device. >> Feb 13 15:28:47 FreeBSD kernel: usbus0: 5.0Gbps Super Speed USB v3.0 >> Feb 13 15:28:47 FreeBSD kernel: Timecounters tick every 1.000 msec >> Feb 13 15:28:47 FreeBSD kernel: hdacc0: <Realtek ALC269 HDA CODEC> at cad >> 0 on hdac0 >> Feb 13 15:28:47 FreeBSD kernel: hdaa0: <Realtek ALC269 Audio Function >> Group> at nid 1 on hdacc0 >> Feb 13 15:28:47 FreeBSD kernel: pcm0: <Realtek ALC269 (Analog >> 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 >> Feb 13 15:28:47 FreeBSD kernel: pcm1: <Realtek ALC269 (Internal Analog >> Mic)> at nid 18 on hdaa0 >> Feb 13 15:28:47 FreeBSD kernel: hdacc1: <Intel Panther Point HDA CODEC> >> at cad 3 on hdac0 >> Feb 13 15:28:47 FreeBSD kernel: hdaa1: <Intel Panther Point Audio >> Function Group> at nid 1 on hdacc1 >> Feb 13 15:28:47 FreeBSD kernel: pcm2: <Intel Panther Point (HDMI/DP 8ch)> >> at nid 5 on hdaa1 >> Feb 13 15:28:47 FreeBSD kernel: usbus1: 480Mbps High Speed USB v2.0 >> Feb 13 15:28:47 FreeBSD kernel: usbus2: 480Mbps High Speed USB v2.0 >> Feb 13 15:28:47 FreeBSD kernel: ugen1.1: <Intel> at usbus1 >> Feb 13 15:28:47 FreeBSD kernel: uhub0: <Intel EHCI root HUB, class 9/0, >> rev 2.00/1.00, addr 1> on usbus1 >> Feb 13 15:28:47 FreeBSD kernel: ugen0.1: <0x8086> at usbus0 >> Feb 13 15:28:47 FreeBSD kernel: uhub1: <0x8086 XHCI root HUB, class 9/0, >> rev 3.00/1.00, addr 1> on usbus0 >> Feb 13 15:28:47 FreeBSD kernel: ugen2.1: <Intel> at usbus2 >> Feb 13 15:28:47 FreeBSD kernel: uhub2: <Intel EHCI root HUB, class 9/0, >> rev 2.00/1.00, addr 1> on usbus2 >> Feb 13 15:28:47 FreeBSD kernel: ada0 at ahcich1 bus 0 scbus0 target 0 lun >> 0 >> Feb 13 15:28:47 FreeBSD kernel: ada0: <ADATA SP900 5.6.0> ATA-8 SATA 3.x >> device >> Feb 13 15:28:47 FreeBSD kernel: ada0: Serial Number 7E3620002080 >> Feb 13 15:28:47 FreeBSD kernel: ada0: 600.000MB/s transfers (SATA 3.x, >> UDMA6, PIO 512bytes) >> Feb 13 15:28:47 FreeBSD kernel: ada0: Command Queueing enabled >> Feb 13 15:28:47 FreeBSD kernel: ada0: 122104MB (250069680 512 byte >> sectors: 16H 63S/T 16383C) >> Feb 13 15:28:47 FreeBSD kernel: ada0: Previously was known as ad4 >> Feb 13 15:28:47 FreeBSD kernel: ses0 at ahciem0 bus 0 scbus2 target 0 lun >> 0 >> Feb 13 15:28:47 FreeBSD kernel: ses0: <AHCI SGPIO Enclosure 1.00 0001> >> SEMB S-E-S 2.00 device >> Feb 13 15:28:47 FreeBSD kernel: ses0: SEMB SES Device >> Feb 13 15:28:47 FreeBSD kernel: cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 >> Feb 13 15:28:47 FreeBSD kernel: cd0: <HL-DT-ST DVDRAM GU70N DE01> >> Removable CD-ROM SCSI-0 device >> Feb 13 15:28:47 FreeBSD kernel: cd0: Serial Number M45CATB0842 >> Feb 13 15:28:47 FreeBSD kernel: cd0: 150.000MB/s transfers (SATA 1.x, >> UDMA6, ATAPI 12bytes, PIO 8192bytes) >> Feb 13 15:28:47 FreeBSD kernel: cd0: Attempt to query device size failed: >> NOT READY, Medium not present - tray closed >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #1 Launched! >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #6 Launched! >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #3 Launched! >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #5 Launched! >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #7 Launched! >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #4 Launched! >> Feb 13 15:28:47 FreeBSD kernel: SMP: AP CPU #2 Launched! >> Feb 13 15:28:47 FreeBSD kernel: Timecounter "TSC-low" frequency >> 1097528772 Hz quality 1000 >> Feb 13 15:28:47 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 15:28:47 FreeBSD kernel: uhub1: 8 ports with 8 removable, self >> powered >> Feb 13 15:28:47 FreeBSD kernel: uhub2: 2 ports with 2 removable, self >> powered >> Feb 13 15:28:47 FreeBSD kernel: uhub0: 2 ports with 2 removable, self >> powered >> Feb 13 15:28:47 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 15:28:47 FreeBSD kernel: ugen2.2: <vendor 0x8087> at usbus2 >> Feb 13 15:28:47 FreeBSD kernel: uhub3: <vendor 0x8087 product 0x0024, >> class 9/0, rev 2.00/0.00, addr 2> on usbus2 >> Feb 13 15:28:47 FreeBSD kernel: ugen1.2: <vendor 0x8087> at usbus1 >> Feb 13 15:28:47 FreeBSD kernel: uhub4: <vendor 0x8087 product 0x0024, >> class 9/0, rev 2.00/0.00, addr 2> on usbus1 >> Feb 13 15:28:47 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 15:28:47 FreeBSD kernel: usbd_setup_device_desc: getting device >> descriptor at addr 1 failed, USB_ERR_TIMEOUT >> Feb 13 15:28:47 FreeBSD kernel: uhub3: 6 ports with 6 removable, self >> powered >> Feb 13 15:28:47 FreeBSD kernel: uhub4: 6 ports with 6 removable, self >> powered >> Feb 13 15:28:47 FreeBSD kernel: ugen1.3: <vendor 0x8087> at usbus1 >> Feb 13 15:28:47 FreeBSD kernel: usb_alloc_device: Failure selecting >> configuration index 0:USB_ERR_IOERROR, port 2, addr 1 (ignored) >> Feb 13 15:28:47 FreeBSD kernel: ugen0.2: <vendor 0x06cb> at usbus0 >> Feb 13 15:28:47 FreeBSD kernel: Root mount waiting for: usbus1 usbus0 >> Feb 13 15:28:47 FreeBSD kernel: ugen1.4: <Generic> at usbus1 >> Feb 13 15:28:47 FreeBSD kernel: ugen0.3: <Vimicro Corp.> at usbus0 >> Feb 13 15:28:47 FreeBSD kernel: Trying to mount root from >> ufs:/dev/gpt/ssdrootfs [rw]... >> Feb 13 15:28:47 FreeBSD kernel: ubt0: <vendor 0x8087 product 0x07da, >> class 224/1, rev 2.00/78.69, addr 3> on usbus1 >> Feb 13 15:28:47 FreeBSD kernel: WARNING: attempt to domain_add(bluetooth) >> after domainfinalize() >> Feb 13 15:28:47 FreeBSD kernel: WARNING: attempt to domain_add(netgraph) >> after domainfinalize() >> Feb 13 15:28:48 FreeBSD ntpd[609]: ntpd 4.2.4p5-a (1) >> Feb 13 15:28:55 FreeBSD ntpd[610]: time correction of -86382 seconds >> exceeds sanity limit (1000); set clock manually to the correct UTC time. >> Feb 13 15:35:08 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x01' >> Feb 13 15:35:08 FreeBSD power_profile: changed to 'performance' >> Feb 13 15:35:12 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x00' >> Feb 13 15:35:12 FreeBSD power_profile: changed to 'economy' >> Feb 13 15:35:16 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x01' >> Feb 13 15:35:16 FreeBSD power_profile: changed to 'performance' >> Feb 13 15:38:06 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x00' >> Feb 13 15:38:06 FreeBSD power_profile: changed to 'economy' >> Feb 13 15:38:09 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x01' >> Feb 13 15:38:09 FreeBSD power_profile: changed to 'performance' >> Feb 13 15:44:24 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x00' >> Feb 13 15:44:24 FreeBSD power_profile: changed to 'economy' >> Feb 13 15:53:17 FreeBSD devd: check_clients: dropping disconnected client >> Feb 13 16:19:39 FreeBSD shutdown: power-down by ember: >> Feb 13 16:19:40 FreeBSD kernel: . >> Feb 13 16:19:40 FreeBSD syslogd: exiting on signal 15 >> Feb 13 17:23:02 FreeBSD syslogd: kernel boot file is /boot/kernel/kernel >> Feb 13 17:23:02 FreeBSD kernel: Copyright (c) 1992-2014 The FreeBSD >> Project. >> Feb 13 17:23:02 FreeBSD kernel: Copyright (c) 1979, 1980, 1983, 1986, >> 1988, 1989, 1991, 1992, 1993, 1994 >> Feb 13 17:23:02 FreeBSD kernel: The Regents of the University of >> California. All rights reserved. >> Feb 13 17:23:02 FreeBSD kernel: FreeBSD is a registered trademark of The >> FreeBSD Foundation. >> Feb 13 17:23:02 FreeBSD kernel: FreeBSD 10.1-RELEASE-p5 #0: Tue Jan 27 >> 08:55:07 UTC 2015 >> Feb 13 17:23:02 FreeBSD kernel: root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >> Feb 13 17:23:02 FreeBSD kernel: FreeBSD clang version 3.4.1 >> (tags/RELEASE_34/dot1-final 208032) 20140512 >> Feb 13 17:23:02 FreeBSD kernel: CPU: Intel(R) Core(TM) i7-3632QM CPU @ >> 2.20GHz (2195.06-MHz K8-class CPU) >> Feb 13 17:23:02 FreeBSD kernel: Origin = "GenuineIntel" Id = 0x306a9 >> Family = 0x6 Model = 0x3a Stepping = 9 >> Feb 13 17:23:02 FreeBSD kernel: >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Feb 13 17:23:02 FreeBSD kernel: >> Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> >> Feb 13 17:23:02 FreeBSD kernel: AMD >> Features=0x28100800<SYSCALL,NX,RDTSCP,LM> >> Feb 13 17:23:02 FreeBSD kernel: AMD Features2=0x1<LAHF> >> Feb 13 17:23:02 FreeBSD kernel: Structured Extended >> Features=0x281<FSGSBASE,SMEP,ERMS> >> Feb 13 17:23:02 FreeBSD kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> Feb 13 17:23:02 FreeBSD kernel: TSC: P-state invariant, performance >> statistics >> Feb 13 17:23:02 FreeBSD kernel: real memory = 8589934592 (8192 MB) >> Feb 13 17:23:02 FreeBSD kernel: avail memory = 8120750080 (7744 MB) >> Feb 13 17:23:02 FreeBSD kernel: Event timer "LAPIC" quality 600 >> Feb 13 17:23:02 FreeBSD kernel: ACPI APIC Table: <LENOVO CB-01 > >> Feb 13 17:23:02 FreeBSD kernel: FreeBSD/SMP: Multiprocessor System >> Detected: 8 CPUs >> Feb 13 17:23:02 FreeBSD kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 >> SMT threads >> Feb 13 17:23:02 FreeBSD kernel: cpu0 (BSP): APIC ID: 0 >> Feb 13 17:23:02 FreeBSD kernel: cpu1 (AP): APIC ID: 1 >> Feb 13 17:23:02 FreeBSD kernel: cpu2 (AP): APIC ID: 2 >> Feb 13 17:23:02 FreeBSD kernel: cpu3 (AP): APIC ID: 3 >> Feb 13 17:23:02 FreeBSD kernel: cpu4 (AP): APIC ID: 4 >> Feb 13 17:23:02 FreeBSD kernel: cpu5 (AP): APIC ID: 5 >> Feb 13 17:23:02 FreeBSD kernel: cpu6 (AP): APIC ID: 6 >> Feb 13 17:23:02 FreeBSD kernel: cpu7 (AP): APIC ID: 7 >> Feb 13 17:23:02 FreeBSD kernel: ioapic0 <Version 2.0> irqs 0-23 on >> motherboard >> Feb 13 17:23:02 FreeBSD kernel: kbd1 at kbdmux0 >> Feb 13 17:23:02 FreeBSD kernel: random: <Software, Yarrow> initialized >> Feb 13 17:23:02 FreeBSD kernel: acpi0: <LENOVO CB-01> on motherboard >> Feb 13 17:23:02 FreeBSD kernel: acpi0: Power Button (fixed) >> Feb 13 17:23:02 FreeBSD kernel: cpu0: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu1: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu2: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu3: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu4: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu5: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu6: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: cpu7: <ACPI CPU> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: hpet0: <High Precision Event Timer> iomem >> 0xfed00000-0xfed003ff on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: Timecounter "HPET" frequency 14318180 Hz >> quality 950 >> Feb 13 17:23:02 FreeBSD kernel: Event timer "HPET" frequency 14318180 Hz >> quality 550 >> Feb 13 17:23:02 FreeBSD kernel: atrtc0: <AT realtime clock> port >> 0x70-0x77 irq 8 on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: atrtc0: Warning: Couldn't map I/O. >> Feb 13 17:23:02 FreeBSD kernel: Event timer "RTC" frequency 32768 Hz >> quality 0 >> Feb 13 17:23:02 FreeBSD kernel: attimer0: <AT timer> port >> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: Timecounter "i8254" frequency 1193182 Hz >> quality 0 >> Feb 13 17:23:02 FreeBSD kernel: Event timer "i8254" frequency 1193182 Hz >> quality 100 >> Feb 13 17:23:02 FreeBSD kernel: Timecounter "ACPI-fast" frequency 3579545 >> Hz quality 900 >> Feb 13 17:23:02 FreeBSD kernel: acpi_timer0: <24-bit timer at >> 3.579545MHz> port 0x408-0x40b on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: acpi_ec0: <Embedded Controller: GPE 0x17> >> port 0x62,0x66 on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: pcib0: <ACPI Host-PCI bridge> port >> 0xcf8-0xcff on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: pci0: <ACPI PCI bus> on pcib0 >> Feb 13 17:23:02 FreeBSD kernel: vgapci0: <VGA-compatible display> port >> 0x3000-0x303f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at >> device 2.0 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: agp0: <IvyBridge mobile GT2 IG> on vgapci0 >> Feb 13 17:23:02 FreeBSD kernel: agp0: aperture size is 256M, detected >> 65532k stolen memory >> Feb 13 17:23:02 FreeBSD kernel: vgapci0: Boot video device >> Feb 13 17:23:02 FreeBSD kernel: xhci0: <Intel Panther Point USB 3.0 >> controller> mem 0xd0600000-0xd060ffff at device 20.0 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: usbus0: waiting for BIOS to give up >> control >> Feb 13 17:23:02 FreeBSD kernel: xhci0: 32 byte context size. >> Feb 13 17:23:02 FreeBSD kernel: xhci0: Port routing mask set to 0xffffffff >> Feb 13 17:23:02 FreeBSD kernel: usbus0 on xhci0 >> Feb 13 17:23:02 FreeBSD kernel: pci0: <simple comms> at device 22.0 (no >> driver attached) >> Feb 13 17:23:02 FreeBSD kernel: ehci0: <Intel Panther Point USB 2.0 >> controller> mem 0xd0619000-0xd06193ff irq 16 at device 26.0 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: usbus1: waiting for BIOS to give up >> control >> Feb 13 17:23:02 FreeBSD kernel: usbus1: timed out waiting for BIOS >> Feb 13 17:23:02 FreeBSD kernel: usbus1: EHCI version 1.0 >> Feb 13 17:23:02 FreeBSD kernel: usbus1 on ehci0 >> Feb 13 17:23:02 FreeBSD kernel: hdac0: <Intel Panther Point HDA >> Controller> mem 0xd0610000-0xd0613fff irq 22 at device 27.0 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: pcib1: <ACPI PCI-PCI bridge> irq 17 at >> device 28.0 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: pci1: <ACPI PCI bus> on pcib1 >> Feb 13 17:23:02 FreeBSD kernel: re0: <RealTek 810xE PCIe 10/100baseTX> >> port 0x2000-0x20ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 16 >> at device 0.0 on pci1 >> Feb 13 17:23:02 FreeBSD kernel: re0: Using 1 MSI-X message >> Feb 13 17:23:02 FreeBSD kernel: re0: ASPM disabled >> Feb 13 17:23:02 FreeBSD kernel: re0: Chip rev. 0x40800000 >> Feb 13 17:23:02 FreeBSD kernel: re0: MAC rev. 0x00400000 >> Feb 13 17:23:02 FreeBSD kernel: miibus0: <MII bus> on re0 >> Feb 13 17:23:02 FreeBSD kernel: rlphy0: <RTL8201E 10/100 media interface> >> PHY 1 on miibus0 >> Feb 13 17:23:02 FreeBSD kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, >> 100baseTX-FDX, auto, auto-flow >> Feb 13 17:23:02 FreeBSD kernel: re0: Ethernet address: 20:89:84:36:3b:36 >> Feb 13 17:23:02 FreeBSD kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at >> device 28.1 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: pci2: <ACPI PCI bus> on pcib2 >> Feb 13 17:23:02 FreeBSD kernel: iwn0: <Intel Centrino Wireless-N 2230> >> mem 0xd0500000-0xd0501fff irq 17 at device 0.0 on pci2 >> Feb 13 17:23:02 FreeBSD kernel: iwn0: adapter type 12 not supported >> Feb 13 17:23:02 FreeBSD kernel: iwn0: could not attach device, error 45 >> Feb 13 17:23:02 FreeBSD kernel: device_attach: iwn0 attach returned 45 >> Feb 13 17:23:02 FreeBSD kernel: ehci1: <Intel Panther Point USB 2.0 >> controller> mem 0xd0618000-0xd06183ff irq 23 at device 29.0 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: usbus2: waiting for BIOS to give up >> control >> Feb 13 17:23:02 FreeBSD kernel: usbus2: timed out waiting for BIOS >> Feb 13 17:23:02 FreeBSD kernel: usbus2: EHCI version 1.0 >> Feb 13 17:23:02 FreeBSD kernel: usbus2 on ehci1 >> Feb 13 17:23:02 FreeBSD kernel: isab0: <PCI-ISA bridge> at device 31.0 on >> pci0 >> Feb 13 17:23:02 FreeBSD kernel: isa0: <ISA bus> on isab0 >> Feb 13 17:23:02 FreeBSD kernel: ahci0: <Intel Panther Point AHCI SATA >> controller> port >> 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem >> 0xd0617000-0xd06177ff irq 19 at device 31.2 on pci0 >> Feb 13 17:23:02 FreeBSD kernel: ahci0: AHCI v1.30 with 6 6Gbps ports, >> Port Multiplier not supported >> Feb 13 17:23:02 FreeBSD kernel: ahcich1: <AHCI channel> at channel 1 on >> ahci0 >> Feb 13 17:23:02 FreeBSD kernel: ahcich2: <AHCI channel> at channel 2 on >> ahci0 >> Feb 13 17:23:02 FreeBSD kernel: ahciem0: <AHCI enclosure management >> bridge> on ahci0 >> Feb 13 17:23:02 FreeBSD kernel: acpi_lid0: <Control Method Lid Switch> on >> acpi0 >> Feb 13 17:23:02 FreeBSD kernel: acpi_tz0: <Thermal Zone> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: acpi_button0: <Power Button> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: atkbdc0: <Keyboard controller (i8042)> >> port 0x60,0x64 irq 1 on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> Feb 13 17:23:02 FreeBSD kernel: kbd0 at atkbd0 >> Feb 13 17:23:02 FreeBSD kernel: atkbd0: [GIANT-LOCKED] >> Feb 13 17:23:02 FreeBSD kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> Feb 13 17:23:02 FreeBSD kernel: psm0: [GIANT-LOCKED] >> Feb 13 17:23:02 FreeBSD kernel: psm0: model Generic PS/2 mouse, device ID >> 0 >> Feb 13 17:23:02 FreeBSD kernel: battery0: <ACPI Control Method Battery> >> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: acpi_acad0: <AC Adapter> on acpi0 >> Feb 13 17:23:02 FreeBSD kernel: orm0: <ISA Option ROM> at iomem >> 0xc0000-0xcefff on isa0 >> Feb 13 17:23:02 FreeBSD kernel: sc0: <System console> at flags 0x100 on >> isa0 >> Feb 13 17:23:02 FreeBSD kernel: sc0: VGA <16 virtual consoles, >> flags=0x300> >> Feb 13 17:23:02 FreeBSD kernel: vga0: <Generic ISA VGA> at port >> 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> Feb 13 17:23:02 FreeBSD kernel: ppc0: cannot reserve I/O port range >> Feb 13 17:23:02 FreeBSD kernel: est0: <Enhanced SpeedStep Frequency >> Control> on cpu0 >> Feb 13 17:23:02 FreeBSD kernel: est1: <Enhanced SpeedStep Frequency >> Control> on cpu1 >> Feb 13 17:23:02 FreeBSD kernel: est2: <Enhanced SpeedStep Frequency >> Control> on cpu2 >> Feb 13 17:23:02 FreeBSD kernel: est3: <Enhanced SpeedStep Frequency >> Control> on cpu3 >> Feb 13 17:23:02 FreeBSD kernel: est4: <Enhanced SpeedStep Frequency >> Control> on cpu4 >> Feb 13 17:23:02 FreeBSD kernel: est5: <Enhanced SpeedStep Frequency >> Control> on cpu5 >> Feb 13 17:23:02 FreeBSD kernel: est6: <Enhanced SpeedStep Frequency >> Control> on cpu6 >> Feb 13 17:23:02 FreeBSD kernel: est7: <Enhanced SpeedStep Frequency >> Control> on cpu7 >> Feb 13 17:23:02 FreeBSD kernel: random: unblocking device. >> Feb 13 17:23:02 FreeBSD kernel: usbus0: 5.0Gbps Super Speed USB v3.0 >> Feb 13 17:23:02 FreeBSD kernel: Timecounters tick every 1.000 msec >> Feb 13 17:23:02 FreeBSD kernel: hdacc0: <Realtek ALC269 HDA CODEC> at cad >> 0 on hdac0 >> Feb 13 17:23:02 FreeBSD kernel: hdaa0: <Realtek ALC269 Audio Function >> Group> at nid 1 on hdacc0 >> Feb 13 17:23:02 FreeBSD kernel: pcm0: <Realtek ALC269 (Analog >> 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 >> Feb 13 17:23:02 FreeBSD kernel: pcm1: <Realtek ALC269 (Internal Analog >> Mic)> at nid 18 on hdaa0 >> Feb 13 17:23:02 FreeBSD kernel: hdacc1: <Intel Panther Point HDA CODEC> >> at cad 3 on hdac0 >> Feb 13 17:23:02 FreeBSD kernel: hdaa1: <Intel Panther Point Audio >> Function Group> at nid 1 on hdacc1 >> Feb 13 17:23:02 FreeBSD kernel: pcm2: <Intel Panther Point (HDMI/DP 8ch)> >> at nid 5 on hdaa1 >> Feb 13 17:23:02 FreeBSD kernel: usbus1: 480Mbps High Speed USB v2.0 >> Feb 13 17:23:02 FreeBSD kernel: usbus2: 480Mbps High Speed USB v2.0 >> Feb 13 17:23:02 FreeBSD kernel: ugen0.1: <0x8086> at usbus0 >> Feb 13 17:23:02 FreeBSD kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, >> rev 3.00/1.00, addr 1> on usbus0 >> Feb 13 17:23:02 FreeBSD kernel: ugen2.1: <Intel> at usbus2 >> Feb 13 17:23:02 FreeBSD kernel: ugen1.1: <Intel> at usbus1 >> Feb 13 17:23:02 FreeBSD kernel: uhub1: <Intel EHCI root HUB, class 9/0, >> rev 2.00/1.00, addr 1> on usbus1 >> Feb 13 17:23:02 FreeBSD kernel: uhub2: <Intel EHCI root HUB, class 9/0, >> rev 2.00/1.00, addr 1> on usbus2 >> Feb 13 17:23:02 FreeBSD kernel: ada0 at ahcich1 bus 0 scbus0 target 0 lun >> 0 >> Feb 13 17:23:02 FreeBSD kernel: ada0: <ADATA SP900 5.6.0> ATA-8 SATA 3.x >> device >> Feb 13 17:23:02 FreeBSD kernel: ada0: Serial Number 7E3620002080 >> Feb 13 17:23:02 FreeBSD kernel: ada0: 600.000MB/s transfers (SATA 3.x, >> UDMA6, PIO 512bytes) >> Feb 13 17:23:02 FreeBSD kernel: ada0: Command Queueing enabled >> Feb 13 17:23:02 FreeBSD kernel: ada0: 122104MB (250069680 512 byte >> sectors: 16H 63S/T 16383C) >> Feb 13 17:23:02 FreeBSD kernel: ada0: Previously was known as ad4 >> Feb 13 17:23:02 FreeBSD kernel: ses0 at ahciem0 bus 0 scbus2 target 0 lun >> 0 >> Feb 13 17:23:02 FreeBSD kernel: ses0: <AHCI SGPIO Enclosure 1.00 0001> >> SEMB S-E-S 2.00 device >> Feb 13 17:23:02 FreeBSD kernel: ses0: SEMB SES Device >> Feb 13 17:23:02 FreeBSD kernel: cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 >> Feb 13 17:23:02 FreeBSD kernel: cd0: <HL-DT-ST DVDRAM GU70N DE01> >> Removable CD-ROM SCSI-0 device >> Feb 13 17:23:02 FreeBSD kernel: cd0: Serial Number M45CATB0842 >> Feb 13 17:23:02 FreeBSD kernel: cd0: 150.000MB/s transfers (SATA 1.x, >> UDMA6, ATAPI 12bytes, PIO 8192bytes) >> Feb 13 17:23:02 FreeBSD kernel: cd0: Attempt to query device size failed: >> NOT READY, Medium not present - tray closed >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #1 Launched! >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #6 Launched! >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #4 Launched! >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #7 Launched! >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #5 Launched! >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #2 Launched! >> Feb 13 17:23:02 FreeBSD kernel: SMP: AP CPU #3 Launched! >> Feb 13 17:23:02 FreeBSD kernel: Timecounter "TSC-low" frequency >> 1097530316 Hz quality 1000 >> Feb 13 17:23:02 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 17:23:02 FreeBSD kernel: uhub0: 8 ports with 8 removable, self >> powered >> Feb 13 17:23:02 FreeBSD kernel: uhub2: 2 ports with 2 removable, self >> powered >> Feb 13 17:23:02 FreeBSD kernel: uhub1: 2 ports with 2 removable, self >> powered >> Feb 13 17:23:02 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 17:23:02 FreeBSD kernel: ugen1.2: <vendor 0x8087> at usbus1 >> Feb 13 17:23:02 FreeBSD kernel: uhub3: <vendor 0x8087 product 0x0024, >> class 9/0, rev 2.00/0.00, addr 2> on usbus1 >> Feb 13 17:23:02 FreeBSD kernel: ugen2.2: <vendor 0x8087> at usbus2 >> Feb 13 17:23:02 FreeBSD kernel: uhub4: <vendor 0x8087 product 0x0024, >> class 9/0, rev 2.00/0.00, addr 2> on usbus2 >> Feb 13 17:23:02 FreeBSD kernel: Root mount waiting for: usbus2 usbus1 >> usbus0 >> Feb 13 17:23:02 FreeBSD kernel: usbd_setup_device_desc: getting device >> descriptor at addr 1 failed, USB_ERR_TIMEOUT >> Feb 13 17:23:02 FreeBSD kernel: uhub4: 6 ports with 6 removable, self >> powered >> Feb 13 17:23:02 FreeBSD kernel: uhub3: 6 ports with 6 removable, self >> powered >> Feb 13 17:23:02 FreeBSD kernel: ugen1.3: <vendor 0x8087> at usbus1 >> Feb 13 17:23:02 FreeBSD kernel: usb_alloc_device: Failure selecting >> configuration index 0:USB_ERR_IOERROR, port 2, addr 1 (ignored) >> Feb 13 17:23:02 FreeBSD kernel: ugen0.2: <vendor 0x06cb> at usbus0 >> Feb 13 17:23:02 FreeBSD kernel: Root mount waiting for: usbus1 usbus0 >> Feb 13 17:23:02 FreeBSD kernel: ugen1.4: <Generic> at usbus1 >> Feb 13 17:23:02 FreeBSD kernel: ugen0.3: <Vimicro Corp.> at usbus0 >> Feb 13 17:23:02 FreeBSD kernel: Trying to mount root from >> ufs:/dev/gpt/ssdrootfs [rw]... >> Feb 13 17:23:02 FreeBSD kernel: ubt0: <vendor 0x8087 product 0x07da, >> class 224/1, rev 2.00/78.69, addr 3> on usbus1 >> Feb 13 17:23:02 FreeBSD kernel: WARNING: attempt to domain_add(bluetooth) >> after domainfinalize() >> Feb 13 17:23:02 FreeBSD kernel: WARNING: attempt to domain_add(netgraph) >> after domainfinalize() >> Feb 13 17:23:03 FreeBSD ntpd[617]: ntpd 4.2.4p5-a (1) >> Feb 13 17:23:03 FreeBSD kernel: . >> Feb 13 17:23:11 FreeBSD ntpd[618]: time correction of -86382 seconds >> exceeds sanity limit (1000); set clock manually to the correct UTC time. >> Feb 13 17:48:01 FreeBSD kernel: coretemp0: <CPU On-Die Thermal Sensors> >> on cpu0 >> Feb 13 17:48:01 FreeBSD kernel: coretemp1: <CPU On-Die Thermal Sensors> >> on cpu1 >> Feb 13 17:48:01 FreeBSD kernel: coretemp2: <CPU On-Die Thermal Sensors> >> on cpu2 >> Feb 13 17:48:01 FreeBSD kernel: coretemp3: <CPU On-Die Thermal Sensors> >> on cpu3 >> Feb 13 17:48:01 FreeBSD kernel: coretemp4: <CPU On-Die Thermal Sensors> >> on cpu4 >> Feb 13 17:48:01 FreeBSD kernel: coretemp5: <CPU On-Die Thermal Sensors> >> on cpu5 >> Feb 13 17:48:01 FreeBSD kernel: coretemp6: <CPU On-Die Thermal Sensors> >> on cpu6 >> Feb 13 17:48:01 FreeBSD kernel: coretemp7: <CPU On-Die Thermal Sensors> >> on cpu7 >> Feb 13 17:58:20 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x01' >> Feb 13 17:58:20 FreeBSD power_profile: changed to 'performance' >> Feb 13 17:58:59 FreeBSD login: ROOT LOGIN (root) ON ttyv1 >> Feb 13 18:31:22 FreeBSD devd: Executing '/etc/rc.d/power_profile 0x00' >> Feb 13 18:31:22 FreeBSD power_profile: changed to 'economy' >> Feb 13 18:31:34 FreeBSD devd: check_clients: dropping disconnected client >> >> >> Says 13 Feb because I didn't setup the clock yet. Clock Is the last thing >> that I care this moment >> >> >> ------------------------------------------------------------------------------------------------------------------------------------------------------------- >> >> 2015-02-12 18:27 GMT+02:00 Ian Smith <smithi@nimnet.asn.au>: >> >>> On Thu, 12 Feb 2015 17:55:56 +0200, george ember wrote: >>> >>> > Also I don't know if helps >>> > *$ sysctl hw.acpi.battery* >>> > hw.acpi.battery.life: 22 >>> > hw.acpi.battery.time: 53 >>> > hw.acpi.battery.state: 1 >>> > hw.acpi.battery.units: 1 >>> > hw.acpi.battery.info_expire: 5 >>> >>> > I guess that means 53 minutes already working / 22% power left on >>> > battery. Sounds bad :( >>> >>> smithi@x200:~ % sysctl -d hw.acpi.battery >>> hw.acpi.battery: battery status and info >>> hw.acpi.battery.life: percent capacity remaining >>> hw.acpi.battery.time: remaining time in minutes >>> hw.acpi.battery.state: current status flags >>> hw.acpi.battery.units: number of batteries >>> hw.acpi.battery.info_expire: time in seconds until info is refreshed >>> >>> 53 minutes remaining at 22% still works out to ~4 hours total, assuming >>> it shows 100% when fully charged, after having been fully discharged. >>> >>> cheers, Ian >>> >> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ7d6ndwpteeG1WKdpib0Lfrc3L5EL0--CtRKudzW2v2XDxagA>