Date: Thu, 22 Nov 2001 20:42:08 +0100 From: "Diego Adolf" <diegoadolf@yahoo.com> To: <freebsd-mobile@freebsd.org> Subject: pccardd problems Message-ID: <000301c1738d$ec1581e0$b24d03d5@diego>
next in thread | raw e-mail | index | archive | help
hello everyone,
i've been using linux for a while and now decided to try freebsd. one big
problem i'm facing is that i cannot use pcmcia devices. I have read the
instruction on freebsd.org but i just can't get it working.
Every time i insert a card i get the message ' No card in database for
"(null)"("(null)") ' . I have been trying two cards: a Zeus modem and a
Maxtech Ethernet Adapter. Both run under linux
I would appreciate if some could help me out with this problem. detailed
information is below.
thanks a lot
PS: i hope this e-mailis is in plain text, it should be according to my mail
client
I'm running a Compaq Presario 1235, 266mhz 96 ram
There are is only one pcmcia slot but two are detected. I don't think this
is the problem because this also happens under linux and Win98.
my /etc/defaults/pccard.conf is the original, i've only removed the IRQ 5
because i have an onboard sound card
i don't have a /etc/pccard.conf file
i haven't put pccard_enable="Yes" in /etc/rc.conf but a card gets detected
anyways if it is inside at startup
uname -a output:
FreeBSD 4.4-RELEASE FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC i386
this is dmesg out put i hope it isn't too long
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6tm w/ multimedia extensions (262.39-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x570 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 100663296 (98304K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> en pcic0
config> po pcic0 0x3e0
config> ir pcic0 0
config> iom pcic0 0xd0000
config> f pcic0 0
config> q
avail memory = 93323264 (91136K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc048009c.
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00fdf70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI to ISA bridge (vendor=1045 device=c700)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci_cfgintr_virgin: using routable PCI-only interrupt 11
pci_cfgintr: 0:10 INTA routed to irq 11
pcic0: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa
irq]
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (2) to configured irq 11 at 0:10:0
pci_cfgintr: 0:10 INTB routed to irq 11
pcic1: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa
irq]
pccard1: <PC Card bus (classic)> on pcic1
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 18.0 irq 11
ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xfecff000-0xfecfffff irq
10 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
atapci0: <Generic PCI ATA controller> port 0xfcf0-0xfcff at device 20.0 on
pci0
atapci0: Busmastering DMA not supported
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 3909MB <FUJITSU MHC2040AT> [7944/16/63] at ata0-master BIOSPIO
acd0: CDROM <SR240S> at ata1-master using BIOSPIO
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
thanks again for reading this...
Diego Adolf
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000301c1738d$ec1581e0$b24d03d5>