Date: Thu, 25 Feb 1999 10:23:27 +0800 (HKT) From: Chan Yiu Wah <c5666305@hkstar.com> To: freebsd-multimedia@freebsd.org Subject: please help to setup fxtv Message-ID: <199902250223.KAA09548@b1.hkstar.com>
next in thread | raw e-mail | index | archive | help
Hello, I am newbie to multmedia and all the applications like fxtv. I recently got a LeadTek WinView 601 tv/fm tuner card and tried to setup it. I had no problem to make the system to recognized the card. It seemed ok. However, I got no image when I start the fxtv (version 0.48). Here are the fxtv -debug startup and the dmesg of my system. Can anyone help ? Thanks. Clarence ======= fxtv -debug startup ======= ioctl(BT848_REEPROM) failed: Input/output error open("/dev/mixer") failed Direct Video not supported by visual...using XImages Fxtv v0.48 DETECTED CAPTURE CARD(S) [DRIVER PROBES]: bktr0: <BrookTree 848a> rev 0x12 int a irq 9 on pci0.9.0 bti2c0: <bt848 Hard/Soft I2C controller> SYSCTL MIB VALUES: kern.version: FreeBSD 4.0-CURRENT #0: Thu Feb 25 09:40:16 GMT 1999 root@fbsd-elf.comp.polyu.edu.hk:/usr/src/sys/compile/MY-GENERIC hw.bt848.card: -1 hw.bt848.tuner: -1 hw.bt848.reverse_mute: -1 hw.bt848.format: -1 TUNER SIGNATURE (0x01 - 0xff): 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 01 a6 07 28 d4 d6 bf ef 26 9a 07 28 ea 00 00 00 00 00 00 00 00 a4 08 28 01 00 00 00 68 69 08 28 98 d7 bf 30 2b 33 07 08 0a 00 00 00 af d6 bf ef 01 00 00 00 5c 18 11 28 00 00 00 00 00 a4 08 28 81 a6 07 28 4f 97 04 08 b8 84 07 28 68 69 08 28 00 00 00 00 4c da 22 28 01 ed 11 28 2c d7 bf ef e1 9c 07 28 68 69 08 28 2c d7 bf ef 7d 9a 07 28 TUNER I2C DEVICES FOUND AT: 0xc2 CAPTURE CARD EEPROM CONTENTS: Read 0 EEPROM bytes Supported RGB Capture Pixel Formats: bpp Bpp RGB Masks Swap --- --- ---------------------------- ---- 15 2 00007c00, 000003e0, 0000001f NB 16 2 0000f800, 000007e0, 0000001f NB 24 3 00ff0000, 0000ff00, 000000ff B 24 4 00ff0000, 0000ff00, 000000ff NBWb Supported YUV Capture Pixel Formats: YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans ------- ----- ----- ------ --------- ---- ---- ------ 8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N 8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N 8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N XSERVER: 'The XFree86 Project, Inc' v3330, Protocol Verson 11.0 Screen Res = 1024x768, DefDepth = 24; NumScreens = 1 Bitmap Unit/BitOrder/Pad = 32/LSBFirst/32, Image ByteOrder = LSBFirst XF86DGAQueryVersion() succeeded - vers = 1.00 BaseAddr = 0xe0000000, Pitch = 1024, BankSize/RamSize = 4194304/4194304 Rating Available Visuals: Rating Class bpp Bpp R,G,B Masks Swap DirectVid ------ ----------- --- --- ---------------------------- ---- --------- 4 TrueColor 24 3,3 00ff0000, 0000ff00, 000000ff -- No Default Visual is 24-bpp TrueColor XF86VidModeQueryVersion() succeeded - version = 0.08 ======= fxtv -debug startup ======= ======= dmesg ======= Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Thu Feb 25 09:40:16 GMT 1999 root@fbsd-elf.comp.polyu.edu.hk:/usr/src/sys/compile/MY-GENERIC Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 233864680 Hz CPU: Pentium/P55C (233.86-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping=3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 134217728 (131072K bytes) avail memory = 126844928 (123872K bytes) Preloaded elf kernel "kernel" at 0xf03af000. vinum: loaded ccd0-3: Concatenated disk drivers Probing for devices on PCI bus 0: chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0 chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 uhci0: <Intel 82371AB/EB (PIIX4) USB Host Controller> rev 0x01 int d irq 11 on pci0.7.2 usb0: USB version 1.0, interrupting at 11 intpm0: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 intpm0: I/O mapped 5000 ALLOCED IRQ 0 intr IRQ 9 enabled revision 0 intsmb0: <Intel PIIX4 SMBUS Interface> smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 4000 ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 10 on pci0.8.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs bktr0: <BrookTree 848a> rev 0x12 int a irq 9 on pci0.9.0 bti2c0: <bt848 Hard/Soft I2C controller> iicbb0: <I2C generic bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only smbus1: <System Management Bus> on bti2c0 smb1: <SMBus general purpose I/O> on smbus1 IMS TV Turbo, Philips FR1236 NTSC FM tuner. vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0 ed2: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 10 on pci0.12.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed1 not found at 0x280 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus 0 ppi0: <generic parallel i/o> on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface usbd_match usb0: <Intel 82371AB/EB (PIIX4) USB Host Controller> usbd_attach usbd_new_device bus=0xf09bc000 depth=0 lowspeed=0 usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0, protocol=0, maxpacket=64, ls=0 usbd_new_device: new dev (addr 1), dev=0xf09cdf80, parent=0xf09c4d40 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0, powerquirk=0 usbd_set_config_index: set config 1 usbd_set_config_index: setting new config 1 uhub0: 2 ports with 2 removable, self powered usbd_init_port: adding hub port=1 status=0x0100 change=0x0000 usbd_init_port: adding hub port=2 status=0x0100 change=0x0000 Intel Pentium detected, installing workaround for F00F bug Waiting 15 seconds for SCSI devices to settle changing root device to da0s1a cd0 at ahc0 bus 0 target 3 lun 0 cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [80798 x 2048 byte records] da1 at ahc0 bus 0 target 2 lun 0 da1: <FUJITSU M2513A 1500> Removable Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 10) da1: Attempt to query device size failed: NOT READY, Medium not present da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) ======= dmesg ======= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902250223.KAA09548>