Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 Sep 2000 12:43:52 -0400
From:      "Sean O'Connell" <sean@stat.Duke.EDU>
To:        "Jose M. Alcaide" <jose@we.lc.ehu.es>
Cc:        FreeBSD mobile <freebsd-mobile@FreeBSD.ORG>
Subject:   Re: 4.1.1: removing an already powered off card shows "cardremoved"
Message-ID:  <20000929124352.M63894@stat.Duke.EDU>
In-Reply-To: <39D4C011.ED1DF5DC@we.lc.ehu.es>; from jose@we.lc.ehu.es on Fri, Sep 29, 2000 at 06:15:13PM %2B0200
References:  <39D30C30.9DE428DE@we.lc.ehu.es> <Pine.BSF.4.21.0009280316500.49720-100000@lambic.physics.montana.edu> <20000929.024046.74736619.ume@mahoroba.org> <39D47048.C22351F5@we.lc.ehu.es> <39D4C011.ED1DF5DC@we.lc.ehu.es>

next in thread | previous in thread | raw e-mail | index | archive | help
Jose M. Alcaide stated:
: "Jose M. Alcaide" wrote:
: > 
: > More data: with a modem card the behavior is different: if I power
: > the card off ("card removed" shows up) and then I extract it, the message
: > does not appear again; but, if I inmediately insert the card, then
: > it is not detected until I type "pccardc power 0 1". Something
: > is broken...
: > 
: 
: I found something interesting: the problem I described with the modem
: (a Xircom RealPort 56) only happens when pcic runs in irq mode _and_
: after a suspend-resume cycle. It seems that there is some bad combination
: of irq-driven pcic, suspend-resume, and some powered-off cards. Weird.

Jose-

Funny things is that I did some more playing with HP this morning
and it seems to do fine with suspend/resume and the modem now ...
I am using polling.  I did change the pccard.conf entry some (moved 
it to auto entry in the config line .. seemed to help some).

S
-----------------------------------------------------------------------
Sean O'Connell                                Email: sean@stat.Duke.EDU
Institute of Statistics and Decision Sciences Phone: (919) 684-5419
Duke University                               Fax:   (919) 684-8594


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000929124352.M63894>