Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 04 Dec 1999 00:30:45 -0200
From:      Gustavo V G C Rios <grios@ddsecurity.com.br>
To:        questions@freebsd.org
Subject:   reboots
Message-ID:  <38487CD5.C9EC8B7@ddsecurity.com.br>

next in thread | raw e-mail | index | archive | help
Hi!
I am sending this message, in order to get a help from you wizards.

Just after turn power on, i get into FreeBSD boot manager, it is given
me three choices:
F1: DOS
F2: FreeBSD
F3: Linux

Then, i select FreeBSD (F2)! Now, after BTX delay time to boot i time
ESC, what brings me into the following prompt:

disk2s2a:>

I issue the reboot command, what cause some register values to be
printed into the screen, and the message: System Halted.

After the system halted message i come into the OS menu again:
F1: DOS
F2: FreeBSD
F3: Linux


I choose FreeBSD (F2), and this is what a get:

Fatal Trap 22: FPU device not available while in kernel mode

Instruction Pointer     = 0x8:0c01a86fd
Stack Pointer           = 0x10:0xc024ff0c
Frame Pointer           = 0x10:0xc024ff1c
Code Segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def 32, gran 1
Processor eflags        = interrupt enabled, resume, IOPL=0
Current process         = 0 ()
interrupt mask          = net tty bio cam
trap number             = 22
panic: FPU device not available
Automatic reboot in 15 seconds - ......


Do you wizard know what is happening ?

This is the only situation that causes FBSD to crash, on other way,
nothing wrong happens, my system runs like a rock.

Thanks a lot for your time and cooperation.



PS: my uname -a output:
FreeBSD etosha 3.3-STABLE FreeBSD 3.3-STABLE #1: Sun Nov 28 02:16:33 EDT
1999     root@etosha:/usr/src/sys/compile/ETOSHA  i386

PPS:

Here goes my dmesg output (after a normal boot):

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights
reserved.
FreeBSD 3.3-STABLE #1: Sun Nov 28 02:16:33 EDT 1999
    root@etosha:/usr/src/sys/compile/ETOSHA
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 267274388 Hz
CPU: Pentium II (267.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping = 4
 
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 134217728 (131072K bytes)
avail memory = 128262144 (125256K bytes)
Preloaded elf kernel "kernel" at 0xc023b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc023b09c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443LX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443LX PCI-PCI bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
Probing for devices on PCI bus 1:
vga0: <S3 model 8a10 graphics accelerator> rev 0x04 int a irq 11 on
pci1.0.0
Probing for devices on the ISA bus:
sc0 flags 0x6 on isa
sc0: VGA color <8 virtual consoles, flags=0x6>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:00:21:6c:8f:e0, type NE2000 (16 bit) 
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 4 on isa
sio2: type 16550A
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE8.4A>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <IOMEGA  ZIP 100       ATAPI       Floppy/14.A>,
removable, intr, iordis
wfd0: medium type unknown (no disk)
wdc1: unit 1 (atapi): <  34X CD-ROM/VER 1.D1>, removable, accel, dma,
iordy
acd0: drive speed 1375 - 3781KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa
changing root device to wd0s2a


-- 
Microsoft: Where do you want to go today?
Linux: Where do you want to go tomorrow?
FreeBSD: Are you guys coming or what?


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38487CD5.C9EC8B7>