Date: Sun, 02 Oct 2005 18:24:46 -0400 From: Nicolas Blais <nb_root@videotron.ca> To: freebsd-current@freebsd.org Subject: Re: umass card reader timeout Message-ID: <200510021824.53642.nb_root@videotron.ca> In-Reply-To: <434059DC.3050307@siad.net> References: <20050810084015.40585.qmail@web54409.mail.yahoo.com> <434059DC.3050307@siad.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart1216247.AQtbUAgqTY Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On October 2, 2005 06:06 pm, Don L. Belcher wrote: > I thought to give version 6 a try. After da0 fails then it tries da0-da2 > and fails with the same timeout although da0-da2 are listed in the dev > directory but not da3. It also takes a few hours to boot-up is there some > place that I can adjust the time-out? > > > FreeBSD rover.siad.net 6.0-BETA5 FreeBSD 6.0-BETA5 #6: Sat Oct 1 > 01:45:24 PDT 2005 > don@rover.siad.net:/usr/obj/usr/home/don/FreeBSD-Version6/src/sys/GENERIC > i386 > > > pass0 at umass-sim0 bus 0 target 0 lun 0 > pass0: <GENERIC USB Storage-SMC 014D> Removable Direct Access SCSI-0 devi= ce > pass0: Serial Number \^_ > pass0: 40.000MB/s transfers > pass1 at umass-sim0 bus 0 target 0 lun 1 > pass1: <GENERIC USB Storage-CFC 014D> Removable Direct Access SCSI-0 devi= ce > pass1: Serial Number \^_ > pass1: 40.000MB/s transfers > pass2 at umass-sim0 bus 0 target 0 lun 2 > pass2: <GENERIC USB Storage-MMC 014D> Removable Direct Access SCSI-0 devi= ce > pass2: Serial Number \^_ > pass2: 40.000MB/s transfers > pass3 at umass-sim0 bus 0 target 0 lun 3 > pass3: <GENERIC USB Storage-MSC 014D> Removable Direct Access SCSI-0 devi= ce > pass3: Serial Number \^_ > pass3: 40.000MB/s transfers > > > (da0:umass-sim0:0:0:0): error 6 > (da0:umass-sim0:0:0:0): Unretryable Error > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <GENERIC USB Storage-SMC 014D> Removable Direct Access SCSI-0 device > da0: Serial Number \^_ > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > (da1:umass-sim0:0:0:1): error 6 > (da1:umass-sim0:0:0:1): Unretryable Error > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <GENERIC USB Storage-CFC 014D> Removable Direct Access SCSI-0 device > da1: Serial Number \^_ > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > (da2:umass-sim0:0:0:2): error 6 > (da2:umass-sim0:0:0:2): Unretryable Error > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <GENERIC USB Storage-MMC 014D> Removable Direct Access SCSI-0 device > da2: Serial Number \^_ > da2: 40.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > GEOM: new disk ad8 > GEOM: new disk da0 > GEOM: new disk da1 > GEOM: new disk da2 > GEOM: new disk da3 > GEOM: new disk ar0 > umass0: BBB reset failed, TIMEOUT > (da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR > (da3:umass-sim0:0:0:3): Retrying Command > umass0: BBB reset failed, TIMEOUT > (da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR > (da3:umass-sim0:0:0:3): Retrying Command I too wish I could work my card reader. I have the same problem as you, exc= ept=20 that it doesn't take "hours" to boot but 1 minute between each probe pass, = so=20 5 minutes: (probe1:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe1:umass-sim0:0:0:0): Retrying Command (probe1:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe1:umass-sim0:0:0:0): Retrying Command (probe1:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe1:umass-sim0:0:0:0): Retrying Command (probe1:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe1:umass-sim0:0:0:0): Retrying Command (probe1:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe1:umass-sim0:0:0:0): error 5 (probe1:umass-sim0:0:0:0): Retries Exausted Without ehci, there is no more delay, but it still doesn't work and I loose= my=20 mouse. Nicolas. =2D-=20 =46reeBSD 7.0-CURRENT #0: Sat Oct 1 11:51:38 EDT 2005 =20 root@clk01a:/usr/obj/usr/src/sys/CLK01A=20 PGP? : http://66.130.198.54:8081/security/nb_root.asc --nextPart1216247.AQtbUAgqTY Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQBDQF41z38ton5LGeIRAjiCAJ9Ep12he0pi4IafbmdP7MiRzrgBvgCaAztj CRe37wCoPT6ciAXvWVQjrCU= =VPpF -----END PGP SIGNATURE----- --nextPart1216247.AQtbUAgqTY--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200510021824.53642.nb_root>