Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 18 Apr 2019 07:58:34 -0700
From:      Adrian Chadd <adrian.chadd@gmail.com>
To:        Matthias Apitz <guru@unixarea.de>
Cc:        Alexey Dokuchaev <danfe@freebsd.org>,  "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>
Subject:   Re: Atheros AR5B22 WLAN+Bluetooth support on FreeBSD
Message-ID:  <CAJ-Vmom_RuGVdy11OFKtSe_RfgTtbd_Pr=pVkub4tujGOu=WUw@mail.gmail.com>
In-Reply-To: <20190418145002.GA7750@sh4-5.1blu.de>
References:  <CAJ-Vmoku6P1awHFXuV9bkR6ifNocWaSi86Y0a9Z9dS-vKgMsKQ@mail.gmail.com> <20190414163841.GA3208@c720-r342378> <CAJ-Vmonvko=vpbr3kSGBpS-zpeONdQHBjkqMf4gasq=CzDbRpg@mail.gmail.com> <20190415044836.GA2635@c720-r342378> <20190415122652.GA22516@FreeBSD.org> <20190415125217.GA3992@c720-r342378> <20190415173503.GA93707@FreeBSD.org> <20190416103412.GA4582@c720-r342378> <20190417143551.GA78014@FreeBSD.org> <20190417165753.GA12433@sh4-5.1blu.de> <20190418145002.GA7750@sh4-5.1blu.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Ok, so it found and loaded in the bluetooth firmware into the bluetooth NIC
RAM.

https://www.freebsd.org/doc/handbook/network-bluetooth.html

Your goal is to have devices show up in in an inquiry command.


-a



On Thu, 18 Apr 2019 at 07:50, Matthias Apitz <guru@unixarea.de> wrote:

>
> I have booted the other C720 from USB and here are the results:
>
>
> root@c720-r342378-usb:~guru/ath3k/src/usr.bin/ath3k # grep ath dmesg*
> ath0: <Atheros AR946x/AR948x> mem 0xe0400000-0xe047ffff at device 0.0 on
> pci1
> ath0: Enabling WB222 BTCOEX
> ath0: [HT] enabling HT modes
> ath0: [HT] enabling short-GI in 20MHz mode
> ath0: [HT] 1 stream STBC receive enabled
> ath0: [HT] 1 stream STBC transmit enabled
> ath0: [HT] LDPC transmit/receive enabled
> ath0: [HT] 2 RX streams; 2 TX streams
> ath0: AR9460 mac 640.2 RF5110 phy 1638.6
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>
>
> root@c720-r342378-usb:~guru/ath3k/src/usr.bin/ath3k # usbconfig
> ugen1.1: <Intel EHCI root HUB> at usbus1, cfg=3D0 md=3DHOST spd=3DHIGH (4=
80Mbps)
> pwr=3DSAVE (0mA)
> ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=3D0 md=3DHOST spd=3DSUPER
> (5.0Gbps) pwr=3DSAVE (0mA)
> ugen0.2: <Generic Mass Storage> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH
> (480Mbps) pwr=3DON (200mA)
> ugen1.2: <vendor 0x8087 product 0x8000> at usbus1, cfg=3D0 md=3DHOST spd=
=3DHIGH
> (480Mbps) pwr=3DSAVE (0mA)
> ugen0.3: <SunplusIT Inc HD WebCam> at usbus0, cfg=3D0 md=3DHOST spd=3DHIG=
H
> (480Mbps) pwr=3DON (500mA)
> ugen0.4: <vendor 0x0489 product 0xe056> at usbus0, cfg=3D0 md=3DHOST spd=
=3DFULL
> (12Mbps) pwr=3DON (100mA)
> root@c720-r342378-usb:~guru/ath3k/src/usr.bin/ath3k # ./ath3kfw -D -d
> ugen0.4 -I
> ath3kfw: opening dev 0.4
> ath3k_is_3012: found AR3012
> main: AR3012; bcdDevice=3D2, exiting
>
> attached is the full output of 'dmesg'
>
> And now?
>
>         matthias
>
> --
> Matthias Apitz, =E2=9C=89 guru@unixarea.de, http://www.unixarea.de/
> +49-176-38902045
> Public GnuPG key: http://www.unixarea.de/key.pub
> 70 years of NATO - 70 years of wars (Jugoslavia, Afghanistan, Syria, ...)
> and 70 years
> of war preparation against Russia.  -- PEACE instead of NATO !
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmom_RuGVdy11OFKtSe_RfgTtbd_Pr=pVkub4tujGOu=WUw>