Date: Sun, 11 Jul 1999 10:37:03 +0930 From: Greg Lehey <grog@lemis.com> To: Mark Thomas <thomas@clark.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Mounting Jaz/Zip Message-ID: <19990711103703.L21403@freebie.lemis.com> In-Reply-To: <3.0.6.32.19990710103442.0097acc0@pop3.clark.net>; from Mark Thomas on Sat, Jul 10, 1999 at 10:34:42AM -0400 References: <3.0.6.32.19990710103442.0097acc0@pop3.clark.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday, 10 July 1999 at 10:34:42 -0400, Mark Thomas wrote: > > I have both a Jaz (1GB) and Zip (100M) drive on my FBSD box, both SCSI. > dmesg shows (snipped to SCSI bits): > > ahc0: <Adaptec 2940A Ultra SCSI adapter> rev 0x01 int a irq 11 on pci0.17.0 > ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs > Waiting 15 seconds for SCSI devices to settle > changing root device to da0s1a > da0 at ahc0 bus 0 target 0 lun 0 > da0: <SEAGATE ST15230N 0298> Fixed Direct Access SCSI-2 device > da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da0: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C) > cd0 at ahc0 bus 0 target 6 lun 0 > cd0: <PLEXTOR CD-ROM PX-6XCS 1.00> Removable CD-ROM SCSI-2 device > cd0: 5.000MB/s transfers (5.000MHz, offset 15) > cd0: Attempt to query device size failed: NOT READY, Medium not present > da2 at ahc0 bus 0 target 5 lun 0 > da2: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device > da2: 3.300MB/s transfers > da2: 96MB (196608 512 byte sectors: 64H 32S/T 96C) > (da1:ahc0:0:4:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SEQADDR > == 0xa > (da1:ahc0:0:4:0): Queuing a BDR SCB > (da1:ahc0:0:4:0): Bus Device Reset Message Sent > (da1:ahc0:0:4:0): no longer in timeout, status = 34b > ahc0: Bus Device Reset on A:4. 1 SCBs aborted > da1 at ahc0 bus 0 target 4 lun 0 > da1: <iomega jaz 1GB J.86> Removable Direct Access SCSI-2 device > da1: 10.000MB/s transfers (10.000MHz, offset 15) > da1: 1021MB (2091050 512 byte sectors: 64H 32S/T 1021C) > > Two questions: > > 1. Are the timeout/reset messages a problem? Yes. You could have cable or drive problems. Is it always da1? Does it only happen when you boot, or also during transfers? > 2. What would be the proper invocation of mount_msdos to mount these > devices. Various attempts such as: mount_msdos /dev/da2 /mnt or mount_msdos > /dev/da2c /mnt all fail with: > > mount_msdos: /dev/da2[whatever]: Invalid argument Crist already answered this one. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990711103703.L21403>