Date: Thu, 02 May 2002 14:31:43 +0200 From: Jean-Jacques Mierop <jean-jacques.mierop@bms.com> To: FreeBSD <freebsd-questions@FreeBSD.ORG> Subject: FreeBSD 4.5 on Alpha server Message-ID: <3CD131AF.D873436F@bms.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------2C3331AEDAC343BA8CF84A64 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit --------------2C3331AEDAC343BA8CF84A64 Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-ID: <3CB68625.624C2CC8@bms.com> Date: Fri, 12 Apr 2002 09:00:53 +0200 From: Jean-Jacques Mierop <jean-jacques.mierop@bms.com> Organization: Bristol-Myers Squibb X-Mailer: Mozilla 4.72 [en]C-BMY (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: FreeBSD 4.5 on Alpha server Content-Type: multipart/mixed; boundary="------------888A9D793FDB34EC6909C9B2" This is a multi-part message in MIME format. --------------888A9D793FDB34EC6909C9B2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I run FreeBSD 4.5 on an alpha server, AS2100a with 2 cpu's. I have 2 questions : 1 : Can we run SMP on an alpha server, or is it only on Intel based servers ? 2 : Are the StorageWorks device known by FreeBSD 4.5 ? Find after my config as well as boot messages output. It looks that Free BSD does not see my Luns (HSZ40). Thanx for any help. Have a nice day. Cheers, JJ Server Configuration ~~~~~~~~~~~~~~~~~~~~ P00>>> P00>>> P00>>>sho config Digital Equipment Corporation AlphaServer 2100A 5/250 SRM Console V5.3-14 VMS PALcode V1.20-3, OSF PALcode V1.22-1 Component Status Module ID CPU 0 P B2040-AB DECchip (tm) 21164-5 CPU 1 P B2040-AB DECchip (tm) 21164-5 Memory 0 P B2022-DA 128 MB Memory 1 P B2022-DA 128 MB Memory 2 P B2022-DA 128 MB Memory 3 P B2022-DA 128 MB I/O 24283-01 dva0.0.0.1000.0 RX26/RX23 Slot Option Hose 0, Bus 0, PCI 2 Intel 82375 Bridge to Bus 1, EISA 3 DECchip 21050-AA Bridge to Bus 2, PCI 6 S3 Trio64/Trio32 9 DEC KZPSA pkc0.7.0.9.0 SCSI Bus ID 7 dkc100.1.0.9.0 HSZ40 dkc101.1.0.9.0 HSZ40 dkc200.2.0.9.0 HSZ40 dkc300.3.0.9.0 HSZ40 dkc301.3.0.9.0 HSZ40 dkc400.4.0.9.0 HSZ40 Slot Option Hose 0, Bus 1, EISA Slot Option Hose 0, Bus 2, PCI 1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7 dka0.0.0.2001.0 RZ28D dka600.6.0.2001.0 RRD45 6 DECchip 21040-AA ewa0.0.0.2006.0 00-00-F8-20-10-3C 7 NCR 53C810 pkb0.7.0.2007.0 SCSI Bus ID 7 jkb1.0.0.2007.0 TZ mkb0.0.0.2007.0 TZ877 P00>>> You can see that there are : - 1 hard disk (dka0.0.0.2001.0 RZ28D) - 6 LUNs (dkc100.1.0.9.0 HSZ40) (dkc101.1.0.9.0 HSZ40) (dkc200.2.0.9.0 HSZ40) (dkc300.3.0.9.0 HSZ40) (dkc301.3.0.9.0 HSZ40) (dkc400.4.0.9.0 HSZ40) It looks to me that the 6 LUNs are not seen by freeBSD 4.5. These are the StorageWorks Array Controller LUNs. Are these supported by freeBSD ? Output at boot time ~~~~~~~~~~~~~~~~~~~ P00>>>boot dka600 (boot dka600.6.0.2001.0 -flags 0) block 0 of dka600.6.0.2001.0 is a valid boot block reading 375 blocks from dka600.6.0.2001.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 2ee00 initializing HWRPB at 2000 initializing page table at 1fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x4000300010114 OSF PAL rev: 0x4000100020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM CD9660 boot, Revision 1.0 (murray@axpbuilder.freebsdmall.com, Mon Jan 28 16:18:52 GMT 2002) Memory: 524288 k Loading /boot/defaults/loader.conf /kernel data=0x406778+0x2acb8 syms=[0x8+0x4e360+0x8+0x38928] \ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel]... Entering kernel at 0xfffffc0000331460... Unrecognized boot flag '0'. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Tue Jan 29 07:52:50 GMT 2002 murray@axpbuilder.freebsdmall.com:/usr/src/sys/compile/GENERIC DEC AlphaServer 2100A AlphaServer 2100A 5/250, 250MHz 8192 byte page size, 2 processors. CPU: EV5 (21164) major=5 minor=5 OSF PAL rev: 0x4000100020116 real memory = 534700032 (522168K bytes) avail memory = 510844928 (498872K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000adc000. Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000adc0c0. md0: Preloaded image </boot/mfsroot> 3276800 bytes at 0xfffffc00007b80c8 md1: Malloc disk t20: using interrupt type 1 on pci bus 0 pci0: <PCI bus> on pcib0 isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 pcib1: <DEC 21050 PCI-PCI bridge> at device 3.0 on pci0 pci2: <PCI bus> on pcib1 sym0: <810a> port 0x5000-0x50ff mem 0x81800000-0x818000ff irq 28 at device 1.0 on pci2 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking de0: <Digital 21040 Ethernet> port 0x5400-0x547f mem 0x81800200-0x8180027f irq 48 at device 6.0 on pci2 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 00:00:f8:20:10:3c sym1: <810> port 0x5800-0x58ff mem 0x81800100-0x818001ff irq 52 at device 7.0 on pci2 sym1: No NVRAM, ID 7, Fast-10, SE, parity checking pci0: <S3 Trio graphics accelerator> at 6.0 irq 32 pci0: <unknown card> (vendor=0x1011, dev=0x0008) at 9.0 irq 44 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.0 irq 0 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.4 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.0 irq 0 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.4 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio1: reserved for low-level i/o ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 Timecounter "alpha" frequency 249747329 Hz Waiting 15 seconds for SCSI devices to settle de0: enabling 10baseT port sa0 at sym1 bus 0 target 0 lun 0 sa0: <DEC TZ877 (C) DEC 9B3C> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) pass3 at sym1 bus 0 target 0 lun 1 pass3: <DEC TZ Media Changer 9B3C> Removable Changer SCSI-2 device pass3: 5.000MB/s transfers (5.000MHz, offset 8) da0 at sym0 bus 0 target 0 lun 0 da0: <DEC RZ28D (C) DEC 0008> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) cd0 at sym0 bus 0 target 6 lun 0 cd0: <DEC RRD45 (C) DEC 0436> Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: cd present [1304904 x 512 byte records] Mounting root from ufs:/dev/md0c WARNING: clock gained 66 days -- CHECK AND RESET THE DATE! /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5) Also, later at disklabel time, only da0 is shown, not one of the 6 LUNs. This disk corresponds to the single hard disk, dka0 --------------888A9D793FDB34EC6909C9B2 Content-Type: text/x-vcard; charset=us-ascii; name="jean-jacques.mierop.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jean-Jacques Mierop Content-Disposition: attachment; filename="jean-jacques.mierop.vcf" begin:vcard n:MIEROP;Jean-Jacques tel;fax:+32 2 351 3975 tel;work:+32 2 352 7636 x-mozilla-html:FALSE org:Bristol-Myers Squibb - Pharmaceutical Research Institute, Informatics;"Quand les poules auront des roulettes, tout ira comme sur des dents..." version:2.1 email;internet:mieropj@bms.com title:UNIX Administrator adr;quoted-printable:;;Waterloo Office Park, Building L=0D=0AB-1410 Waterloo=0D=0ABelgium;;;; fn:Jean-Jacques Mierop end:vcard --------------888A9D793FDB34EC6909C9B2-- --------------2C3331AEDAC343BA8CF84A64 Content-Type: text/x-vcard; charset=us-ascii; name="jean-jacques.mierop.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jean-Jacques Mierop Content-Disposition: attachment; filename="jean-jacques.mierop.vcf" begin:vcard n:MIEROP;Jean-Jacques tel;fax:+32 2 351 3975 tel;work:+32 2 352 7636 x-mozilla-html:FALSE org:Bristol-Myers Squibb - Pharmaceutical Research Institute, Informatics;"Quand les poules auront des roulettes, tout ira comme sur des dents..." version:2.1 email;internet:mieropj@bms.com title:UNIX Administrator adr;quoted-printable:;;Waterloo Office Park, Building L=0D=0AB-1410 Waterloo=0D=0ABelgium;;;; fn:Jean-Jacques Mierop end:vcard --------------2C3331AEDAC343BA8CF84A64-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CD131AF.D873436F>