Date: Wed, 4 Mar 2009 03:21:48 -0300 (BRT) From: "Nenhum_de_Nos" <matheus@eternamente.info> To: freebsd-current@freebsd.org Subject: Re: problem on usb boot from mini itx Message-ID: <102412450d7465056fccd4391f6abc26.squirrel@10.1.1.10> In-Reply-To: <4aaace7590b8352f90fa9d122506569b.squirrel@10.1.1.10> References: <f8161e633a32c1fcde0661afb816cbcb.squirrel@cygnus.homeunix.com> <200903030854.43068.hselasky@c2i.net> <4ce4c26af03344ebfde74fef9c71fdd1.squirrel@cygnus.homeunix.com> <200903031837.31972.hselasky@c2i.net> <5c9f8246fae4afdcc08d5723c812319f.squirrel@cygnus.homeunix.com> <4aaace7590b8352f90fa9d122506569b.squirrel@10.1.1.10>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, March 4, 2009 01:13, Nenhum_de_Nos wrote: > > On Tue, March 3, 2009 17:03, Nenhum_de_Nos wrote: >> >> On Tue, March 3, 2009 14:37, Hans Petter Selasky wrote: >>> Hi, >>> >>> On Tuesday 03 March 2009, Nenhum_de_Nos wrote: >>>> On Tue, March 3, 2009 04:54, Hans Petter Selasky wrote: >>>> > On Monday 02 March 2009, Nenhum_de_Nos wrote: >>>> >> I got one, not a bit of change :( >>>> > >>>> > Is the USB HUB detected? >>>> >>>> as far as I can tell, not at all. It complaints about not finding the >>>> kernel. >>> >>> >>>> my hopes of this working are based int the fact that I can do this on >>>> OpenBSD. So I think is doable (ok, I'm no specialist in this, you are. >>>> If >>>> you say can't, I will believe). >>>> >>>> and more info, if I use the 44 pin ide interface to boot, when fbsd is >>>> on >>>> I can use the usb ports ok. hope this info helps. >>> >>> There is something called USB BIOS legacy support, which is running >>> until >>> we >>> switch some bits on the USB hardware. If I were to guess I think that >>> is >>> where the problem might be according to what you are writing. >> >> I must have it on or off ? >> >> As it is an hp thin client, I don't know if it has such an option. It >> has >> a small flash disk (16MB or 32MB), so you think I can use these things >> together to bypass this problem ? >> >> if anyone has an a idea :) >> >> thanks HPS >> >> matheus > > I'm using the flash disk and I got to boot. I copied kernel/kernel, and > all files from /boot, and defaults/loader.conf. I get to the point where > it fails to mount /, and just finds /dev/ad0 stuff (the flash disk). I did > change loader.conf to say rootdev=disk1s1a (which I believe to be the usb > disk). was this suppose to work ? > I'll now copy the usb and umass modules to the flash disk (hope it will > fit) and put on loader to load them as soon. > > if anyone has any hints, please :) > > thanks, > > matheus I got to the point of: Root mount waiting for: usbus2 and reading the other thread about this, I didn't figured out how to solve :( I updated csup, rebuild and got to the same error. Is there any other thing to do ? thanks, matheus >>>> > have >>>> > known problems with the USB hardware, but I cannot tell if your >>>> model >>>> is >>>> > affected. You could try editing the code /sys/dev/usb/usb_device.c >>>> and >>>> > change >>>> > it so that it will try the set_address command two times before >>>> giving >>>> > up. >>>> >>>> when the loader in fbsd is called, it will run this code ? >>> >>> No, when the kernel is loaded. The loader is using the BIOS USB driver. >>> >>>> I will test this when I get home at night. thanks. If you have more >>>> ideas, >>>> please broadcast :) >>>> >>>> just as more info, I tried first to use pfSense from usb stick and >>>> never >>>> it worked :( It nevet got to boot. >>>> >>> >>> Ok. >>> >>> --HPS >>> >> >> >> -- >> We will call you cygnus, >> The God of balance you shall be >> >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to >> "freebsd-current-unsubscribe@freebsd.org" >> > > > -- > We will call you cygnus, > The God of balance you shall be > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > -- We will call you cygnus, The God of balance you shall be
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?102412450d7465056fccd4391f6abc26.squirrel>