Date: Tue, 18 Sep 2007 18:29:23 -0700 From: Nate Lawson <nate@root.org> To: Roman Pavlik <rp@tns.cz> Cc: freebsd-acpi@freebsd.org Subject: Re: HP6710: 7-current can't boot with enabled acpi Message-ID: <46F07B73.8000908@root.org> In-Reply-To: <20070917115601.GA1371@belzebub.tns.cz> References: <20070917115601.GA1371@belzebub.tns.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
Roman Pavlik wrote: > FreeBSD 7-current, snap 200708 can't boot on Compaq/HP 6710b laptop with > ACPI enabled. The boot process ends with > acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 > acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 > acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 > which indefinitely loops. However manual escape to debugger is possible. > > Without acpi it works fine. There is no problem with > FreeBSD 6.x release even with ACPI enabled. The attached files: You should try ecng-7d.diff, posted earlier today by me. > There is another problem on this machine (I'm not sure if it is connected > with ACPI problem): It froze during boot if the integrated LAN is > enabled in the BIOS (it is BroadCom NetLink Gigabyte adapter - > the driver for it is not in 6.2 release but was already added to > STABLE branch). I don't understand. Tell me whether boot freezes on which FreeBSD version (6.2, 6-stable, 7-current) and whether the NetLink driver is loaded or not. -- Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46F07B73.8000908>