Date: Thu, 29 Mar 2001 18:44:15 -0500 From: Harlan Stenn <Harlan.Stenn@pfcs.com> To: questions@freebsd.org Cc: Harlan.Stenn@pfcs.com, pgardner@xram.com Subject: GA-60XM7E builtin audio problem Message-ID: <5023.985909455@puss.pfcs.com>
next in thread | raw e-mail | index | archive | help
I have two identical machines running identical versions of 4-STABLE (same
kernel).
On one machine I get sound out of the card. Out of the other, I don't.
I've had this problem since I first got these machines earlier this year.
% mpg123 foo.mp3
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3.
Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
Can't open /dev/dsp!
%
On both machines:
lrwxrwxrwx 1 root wheel 4 Mar 28 16:38 /dev/dsp@ -> dsp0
crw-rw-rw- 1 root wheel 30, 3 Mar 29 14:43 /dev/dsp0
and /dev/sndstat returns:
FreeBSD Audio Driver (newpcm) Mar 28 2001 04:44:53
Installed devices:
pcm0: <AudioPCI ES1371> at io 0xa800 irq 9 (1p/1r channels duplex)
Should I assume this is this a hardware problem or is there something I can
do to identify/home-in on the problem?
Here's the dmesg output from one of the machines. The other is identical
with the exception of the MAC address on the NIC.
H
--
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RC #0: Wed Mar 28 04:45:24 EST 2001
root@dog.pfcs.com:/usr/obj/usr/src/sys/XRAM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (801.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 125837312 (122888K bytes)
Preloaded elf kernel "kernel" at 0xc04ac000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04ac09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1131)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 irq 10
pcib2: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xa000-0xa0ff mem 0xd7101000-0xd7101fff irq 11 at device 1.0 on pci2
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xd7000000-0xd70fffff,0xd7100000-0xd7100fff irq 10 at device 3.0 on pci2
fxp0: Ethernet address 00:02:b3:11:31:ff
pcm0: <AudioPCI ES1371> port 0xa800-0xa83f irq 9 at device 10.0 on pci2
isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 9 at device 31.2 on pci0
uhci0: (New UHCI DeviceId=0x24428086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 9 at device 31.4 on pci0
uhci1: (New UHCI DeviceId=0x24448086)
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: (0x24448086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
acd0: CDROM <CD-ROM 52X/AKH> at ata1-master using PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T18350N S93E> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5023.985909455>