Date: Tue, 27 Mar 2007 22:14:12 +0800 From: Ariff Abdullah <ariff@FreeBSD.org> To: "Emmanuel Mie" <manumie@yahoo.fr> Cc: freebsd-multimedia@freebsd.org Subject: Re: HDAC - no sound Message-ID: <20070327221412.012f8bf6.ariff@FreeBSD.org> In-Reply-To: <000e01c77078$0eaaced0$0201a8c0@Edmond> References: <000e01c77078$0eaaced0$0201a8c0@Edmond>
next in thread | previous in thread | raw e-mail | index | archive | help
--Signature=_Tue__27_Mar_2007_22_14_12_+0800_r7tdjgoUEoGx.h_+
Content-Type: text/plain; charset=US-ASCII
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Tue, 27 Mar 2007 15:58:53 +0200
"Emmanuel Mie" <manumie@yahoo.fr> wrote:
> On Tue, 27 Mar 2007 20:25:12 +0800"Ariff Abdullah" ariff at
> FreeBSD.org wrote:
> > Wrong. Just snd_hda_load=3D"YES" . No snd_ich. No hdac. Just
> > snd_hda.I did that. The output of /usr/sbin/mixer has changed (see
> > below),but I still have no sound in KDE. > > In KDE Control
> > Center, "Test Sound" sends a signal (it shows in arts
> > > control tool mixer), but I can't hear a sound. No message
> > > stating that /dev/dsp is busySorry for the lousy questions, and
> > > thanks again for your help.Regards,E.MieMy outputs :# uname
> > > -aFreeBSD 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Tue Mar 13
> > > 15:24:47 CET 2007 root@:/usr/obj/usr/src/sys/GENERIC i386#
> > > pciconf -lv | grep -B 4 multimedia class =3D
> > > displaypcm0@pci0:27:0: class=3D0x040300 card=3D0x01d81028
> > > chip=3D0x27d88086 rev=3D0x01 hdr=3D0x00 vendor =3D 'Intel
> > > Corporation' device =3D '82801G (ICH7 Family) High Definition
> > > Audio' class =3D multimedia# dmesg | grep ^pcmpcm0: <Intel
> > > 82801G High Definition Audio Controller> mem
> > > 0xefebc000-0xefebffff irq 21 at device 27.0 on pci0pcm0: <HDA
> > > Codec: Sigmatel STAC9220>pcm0: <HDA Driver Revision:
> > > 20070327_0044># sysctl hw.snd.verbose=3D'2' ; cat
> > > /dev/sndstatFreeBSD Audio Driver (newpcm: 64bit)Installed
> > > devices:pcm0: <Intel 82801G High Definition Audio Controller> at
> > > memory 0xefebc000 irq 21 kld snd_hda [20070327_0044] (1p/1r/1v
> > > channels duplex default) [pcm0:play:0:dsp0.p0]: spd 48000, fmt
> > > 0x10000010, flags 0x00101000, 0x00000020 interrupts 7012,
> > > underruns 0, feed 7012, ready 0 [b:4096/2048/2|bs:4096/2048/2]
> > > {userland} -> feeder_vchan(0x10000010) ->
> > > feeder_volume(0x10000010) -> {hardware} [pcm0:record:0:dsp0.r0]:
> > > spd 0, fmt 0x00000000/0x00000008, flags 0x00000000, 0x00000000
> > > interrupts 0, overruns 0, feed 0, hfree 16384, sfree 0
> > > [b:16384/8192/2|bs:0/0/0] {hardware} -> feeder_root(0x00000000)
> > > -> {userland} pcm0:play:0:dsp0.p0[pcm0:virtual:0:dsp0.v0]: spd
> > > 44100/48000, fmt 0x10000010, flags 0x10000000, 0x00000008
> > > interrupts 0, underruns 0, feed 0, ready 0
> > > [b:0/0/0|bs:65536/2048/32] {userland} -> feeder_root(0x10000010)
> > > -> feeder_rate(44100 -> 48000) -> {hardware}# sysctl
> > > hw.sndhw.snd.syncdelay: -1hw.snd.usefrags: 0hw.snd.timeout:
> > > 5hw.snd.latency_profile: 1hw.snd.latency:
> > > 5hw.snd.report_soft_formats: 1hw.snd.feeder_buffersize:
> > > 16384hw.snd.feeder_fmt_stereodownmix: 0hw.snd.feeder_rate_round:
> > > 25hw.snd.feeder_rate_max: 2016000hw.snd.feeder_rate_min:
> > > 1hw.snd.verbose: 2hw.snd.sndstat_isopen: 0hw.snd.maxautovchans:
> > > 4hw.snd.default_unit: 0# /usr/sbin/mixerMixer vol is
> > > currently set to 100:100Mixer pcm is currently set to =20
> > > 0:0Mixer speaker is currently set to 0:0Mixer mic is
> > > currently set to 0:0Mixer rec is currently set to =20
> > > 0:0Recording source: mic
>
>=20
uh.. I can read nothing :)=20
Anyway..
Mixer pcm is currently set to 0:0
^^^ <- why ? :)
$ mixer vol 75 pcm 75
Adjust it to suite your ears.
--
Ariff Abdullah
FreeBSD
... Recording in stereo is obviously too advanced
and confusing for us idiot ***** users :P ........
--Signature=_Tue__27_Mar_2007_22_14_12_+0800_r7tdjgoUEoGx.h_+
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)
iD8DBQFGCSa0lr+deMUwTNoRAiS7AJ9cAxTrUif9shwmu8YNtFnJzmNExQCff2ii
PX2QLbgL5MhvULJ+h9KQRBE=
=zli3
-----END PGP SIGNATURE-----
--Signature=_Tue__27_Mar_2007_22_14_12_+0800_r7tdjgoUEoGx.h_+--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070327221412.012f8bf6.ariff>