Date: Sat, 31 Jul 1999 20:59:07 -0400 (Eastern Daylight Time) From: Ed Vander Bush <ed@42interactive.com> To: freebsd-questions@freebsd.org Subject: Installed it via CDROM but can;t mount it Message-ID: <Pine.WNT.4.10.9907312013590.171-100000@ens247>
next in thread | raw e-mail | index | archive | help
I just insalled freebsd on my Dell p133 via a NEC 6x CDROM. When it boots it finds the drive one wdc1 and takes forever to look at it and Ig et a bunch of atapi statments and then weven an error or two... I will enclose /var/tmp/messages below. I can;t seem to mount the CD or firgure out what device name but when I go into sysinstall it reads packagesd off the CD without a problem? What is the device name I want? What is going on? Thanks! /kernel: Copyright (c) 1992-1999 FreeBSD Inc. /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa /kernel: fdc0: FIFO enabled, 8 bytes threshold /kernel: fd0: 1.44MB 3.5in /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa /kernel: wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM1080A> /kernel: wd0: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S /kernel: wdc1 at 0x170-0x177 irq 15 on isa /kernel: wdc1: unit 0 (atapi): <NEC CD-ROM DRIVE:273/4.21>, removable,iordy /kernel: atapi1.0: unknown phase /kernel: atapi1.0: invalid command phase, ireason=0x3, status=51<ready,opdone,check>, error=64<abort> /kernel: atapi1.0: unknown phase /kernel: atapi1.0: invalid command phase, ireason=0x2, status=58<ready,opdone,drq>, error=0 /kernel: atapi1.0: invalid command phase, ireason=0xd8, status=d8<busy,ready,opdone,drq>, error=d8<mchg> /kernel: mcd0 not found at 0x300 /kernel: matcdc0 not found at 0x230 /kernel: scd0 not found at 0x230 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.WNT.4.10.9907312013590.171-100000>