Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 8 Nov 1999 01:03:26 -0800 (PST)
From:      Alfred Perlstein <bright@wintelcom.net>
To:        Joe Abley <jabley@patho.gen.nz>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: ThinkPad 380, sio doesn't do much
Message-ID:  <Pine.BSF.4.05.9911080102180.12797-100000@fw.wintelcom.net>
In-Reply-To: <19991108213409.A31181@patho.gen.nz>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 8 Nov 1999, Joe Abley wrote:

> I have a ThinkPad 380/2635 and I'll be damned if I can get the
> built-in serial port to do anything for me.
> 
> I'm running FreeBSD-3.3-PAO, and have sio configured like this:
> 
>   device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
>   device sio1 at isa? disable port "IO_COM2" tty irq 3
> 
> I've also tried
> 
>   device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
> 
> which made no difference to how the port didn't work. dmesg shows:
> 
>   sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
>   sio0: type 16550A
> 
> I have a Xircom REM56G-100 pcmcia adapter which functions very well as a
> modem, appearing on sio1.
> 
> I found a few old messages from someone else complaining that the
> ThinkPad uart lies dormant until awoken by some nasty proprietary
> IBM win98 driver, which clearly I'm not running here. I am hoping
> that this is not the case, and there is some magic I can do to
> make everything better.
> 
> I don't suppose anybody else has a ThinkPad 380 working well under
> FreeBDS 3.3, and can share some tips with me?
> 
> Also, I was wondering -- does PAO buy me anything on a TP380? Or would
> regular 3.3 work just fine? PCIC on this machine reports itself as
> "Cirrus Logic PD6729/6730 PC-Card Controller".

I was coplaining at the FreeBSDcon about my sio being broken, but
if you look long enough on IBM's website you'll find MS-DOG
binaries to toggle on/off the serial port instead of the infrared
device.

good luck,
-Alfred



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9911080102180.12797-100000>