Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 8 Jun 2007 09:28:35 +0900
From:      "Hidetoshi Shimokawa" <simokawa@FreeBSD.ORG>
To:        "Nate Lawson" <nate@root.org>
Cc:        cvs-src@freebsd.org, src-committers@freebsd.org, cvs-all@freebsd.org
Subject:   Re: cvs commit: src/sys/dev/firewire firewirereg.h fwohci.c sbp.c
Message-ID:  <626eb4530706071728w1a8d0f5fi198e5e708777498e@mail.gmail.com>
In-Reply-To: <46683958.2060700@root.org>
References:  <20070607132053.974EF16A584@hub.freebsd.org> <46683958.2060700@root.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Yes,  that's true.

I recommend you to put it in loader.conf

On 6/8/07, Nate Lawson <nate@root.org> wrote:
> Hidetoshi Shimokawa wrote:
> > simokawa    2007-06-07 13:20:49 UTC
> >
> >   FreeBSD src repository
> >
> >   Modified files:
> >     sys/dev/firewire     firewirereg.h fwohci.c sbp.c
> >   Log:
> >   Add a tunable hw.firewire.phydma_enable.
> >
> >   This is enabled by default.  It should be disabled for
> >   those who are uneasy with peeking/poking from FireWire.
> >
> >   Please note sbp(4) and dcons(4) over FireWire need
> >   this feature.
> >
> >   Revision  Changes    Path
> >   1.48      +1 -0      src/sys/dev/firewire/firewirereg.h
> >   1.91      +11 -6     src/sys/dev/firewire/fwohci.c
> >   1.94      +7 -0      src/sys/dev/firewire/sbp.c
> >
> >
> > Index: src/sys/dev/firewire/firewirereg.h
> > diff -u src/sys/dev/firewire/firewirereg.h:1.47 src/sys/dev/firewire/firewirereg.h:1.48
> > --- src/sys/dev/firewire/firewirereg.h:1.47   Wed Jun  6 14:31:36 2007
> > +++ src/sys/dev/firewire/firewirereg.h        Thu Jun  7 13:20:48 2007
> > @@ -299,6 +299,7 @@
> >
> >  extern int firewire_debug;
> >  extern devclass_t firewire_devclass;
> > +extern int firewire_phydma_enable;
> >
> >  #ifdef __DragonFly__
> >  #define              FWPRI           PCATCH
> > Index: src/sys/dev/firewire/fwohci.c
> > diff -u src/sys/dev/firewire/fwohci.c:1.90 src/sys/dev/firewire/fwohci.c:1.91
> > --- src/sys/dev/firewire/fwohci.c:1.90        Wed Jun  6 14:31:36 2007
> > +++ src/sys/dev/firewire/fwohci.c     Thu Jun  7 13:20:48 2007
> > @@ -79,9 +79,13 @@
> >  #undef OHCI_DEBUG
> >
> >  static int nocyclemaster = 0;
> > +int firewire_phydma_enable = 1;
> >  SYSCTL_DECL(_hw_firewire);
> >  SYSCTL_INT(_hw_firewire, OID_AUTO, nocyclemaster, CTLFLAG_RW, &nocyclemaster, 0,
> >          "Do not send cycle start packets");
> > +SYSCTL_INT(_hw_firewire, OID_AUTO, phydma_enable, CTLFLAG_RW,
> > +     &firewire_phydma_enable, 1, "Allow physical request DMA from firewire");
> > +TUNABLE_INT("hw.firewire.phydma_enable", &firewire_phydma_enable);
> >
> >  static char dbcode[16][0x10]={"OUTM", "OUTL","INPM","INPL",
> >               "STOR","LOAD","NOP ","STOP",};
> > @@ -1862,12 +1866,13 @@
> >
> >               /* Allow async. request to us */
> >               OWRITE(sc, OHCI_AREQHI, 1 << 31);
> > -             /* XXX insecure ?? */
> > -             /* allow from all nodes */
> > -             OWRITE(sc, OHCI_PREQHI, 0x7fffffff);
> > -             OWRITE(sc, OHCI_PREQLO, 0xffffffff);
> > -             /* 0 to 4GB regison */
> > -             OWRITE(sc, OHCI_PREQUPPER, 0x10000);
> > +             if (firewire_phydma_enable) {
> > +                     /* allow from all nodes */
> > +                     OWRITE(sc, OHCI_PREQHI, 0x7fffffff);
> > +                     OWRITE(sc, OHCI_PREQLO, 0xffffffff);
> > +                     /* 0 to 4GB region */
> > +                     OWRITE(sc, OHCI_PREQUPPER, 0x10000);
> > +             }
> >               /* Set ATRetries register */
> >               OWRITE(sc, OHCI_ATRETRY, 1<<(13+16) | 0xfff);
>
> I see this runs each time a PHY_SID intr arrives.  Is that enough to
> really prevent access if a pre-existing host on the bus requests DMA?  I
> don't think an intr is generated in that case.
>
> Should this be a separate function run directly by the sysctl that sets
> the filters immediately?
>
> --
> Nate
>
>


-- 
/\ Hidetoshi Shimokawa
\/  simokawa@FreeBSD.ORG



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?626eb4530706071728w1a8d0f5fi198e5e708777498e>